Search:

Type: Posts; User: Perrorist

Search: Search took 0.00 seconds.

  1. USB-C needs to have PC Alternate Mode. You may...

    USB-C needs to have PC Alternate Mode. You may need to install an extension card with a suitable port. The cable must also be capable of handling that mode. Cheap cables don't.
  2. I've noticed that the case's light strip also...

    I've noticed that the case's light strip also doesn't light up, adding more weight to my suspicion that it's a mobo issue. (The case is a Fractal Design Vector RS.)
  3. Perhaps because my initial thought is that the...

    Perhaps because my initial thought is that the RGB is connected to the appropriate header on the motherboard and the motherboard is responding to a change in power status. Anyway, the cooler is a...
  4. Cooler's RGB lighting dependent on start status

    When I boot up the system, the cooler's RGB kicks in after a second or two, but when I wake it up, most times the cooler's RGB doesn't light up. Why is that?
  5. That seems a bit risky. If I'd known in advance,...

    That seems a bit risky. If I'd known in advance, I'd have bought a narrower cooler, but there's no way I'm changing it now!
  6. I'll have to settle for two sticks. The problem...

    I'll have to settle for two sticks. The problem is the CoolerMaster MA410M cooler is impinging on the first slot. I installed the four sticks before installing the cooler, and I saw that the screw...
  7. I updated the BIOS, cleared CMOS, and pulled all...

    I updated the BIOS, cleared CMOS, and pulled all the sticks, save for A2. The system booted and went straight to the BIOS screen. I added a second stick, and was still good. I could have tried adding...
  8. I noticed a small yellow LED under the POST code...

    I noticed a small yellow LED under the POST code readout, but had no idea what it meant. I've finally found the answer in the HERO manual - it's the DRAM. I'll try the single stick approach.
  9. POST code CC - OEM BDS initialization codes

    With my new build I'm getting as far as this POST code before it stops, but I haven't a clue what OEM BDS is referring to. The monitor isn't showing a connection, so I can't get into the BIOS. Anyone...
Results 1 to 9 of 9