Search:

Type: Posts; User: Hawkstorm

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Xeon ratios are locked as far as I know to stock...

    Xeon ratios are locked as far as I know to stock speed.

    Your board will support unlocked K's to any ratio, but Xeon I think it will just show them locked out, and I wouldn't try ratio clocking a...
  2. Make sure you have the pump on the right header,...

    Make sure you have the pump on the right header, it needs to go on the CPU header.

    Also maybe update your bios.

    But most kits come with software and a driver for the pump, but your pump should...
  3. Replies
    4
    Views
    2,380

    So long as you have both cards running 16x, you...

    So long as you have both cards running 16x, you shouldn't have any probs using the one that comes with the card.

    Can't say I've ever had to use a dedicated bridge, or noticed any drop in...
  4. Replies
    5
    Views
    1,593

    Just because the port is 3.0 doesn't mean the USB...

    Just because the port is 3.0 doesn't mean the USB sticks your using are. :)

    Other than that update the drivers from the manufacturer of the USB controller.

    I have a vague recollection of their...
  5. Replies
    41
    Views
    22,539

    Bios is a lot better though post doesn't show my...

    Bios is a lot better though post doesn't show my correct CPU speed.
  6. Replies
    10
    Views
    8,996

    To my knowledge only Gigabyte do that service, or...

    To my knowledge only Gigabyte do that service, or did.
  7. Actually your Bios isn't as secure as you think,...

    Actually your Bios isn't as secure as you think, I've had mine overwritten 3 times requiring a reflash off a stick.

    God bless UEFI.

    Flash your Bios with a USB stick in the port at the back of...
  8. Just try booting with 1 ram stick and your vid...

    Just try booting with 1 ram stick and your vid card.

    These board are crap for Memory kit problems.
  9. Replies
    25
    Views
    34,823

    I have the 2.2 Samsung driver installed but it...

    I have the 2.2 Samsung driver installed but it makes no difference with or without it.
  10. Replies
    25
    Views
    34,823

    I have the 2GB 960 pro and I'm having the same...

    I have the 2GB 960 pro and I'm having the same problems, and the same results.
  11. Replies
    2
    Views
    1,066

    You can also try increasing your voltages a...

    You can also try increasing your voltages a little and perhaps try tweaking your system agent too.
  12. Replies
    20
    Views
    8,339

    You should be able to run in 16 16 mode with a...

    You should be able to run in 16 16 mode with a soundcard I do.

    Make sure you use both the 16 bit slots and try the soundcard in the bottom one.
  13. Replies
    25
    Views
    10,765

    @pleot Not from my own experience the temps in...

    @pleot Not from my own experience the temps in OCCT are accurate, but the voltages etc may not be as it doesn't report Haswell-E correctly in this version, that'll prolly be version 5.

    And running...
  14. Replies
    3
    Views
    1,908

    Try Googling it you never know there maybe a...

    Try Googling it you never know there maybe a supplier that sells them in bags.

    Failing that contact Asus support directly they maybe able to assist you.
  15. Replies
    12
    Views
    6,038

    When you initially boot check to see if the drive...

    When you initially boot check to see if the drive is still in the boot order correctly.

    I have had issues with this board where drives would pop out of bios completely and it was my Memory Kit...
  16. Replies
    7
    Views
    2,475

    Your system agent might need to be tweaked for...

    Your system agent might need to be tweaked for your kit and your CPU.

    As for where to buy Amazon is a good option, and make sure your seller is Amazon not a third party, at least it is in the UK,...
  17. Replies
    4
    Views
    3,160

    If you do a Upgrade to windows 10 from inside...

    If you do a Upgrade to windows 10 from inside your old OS it will archive it and everything on your drive, and you can also select not to keep anything which is the same as a clean install, it also...
  18. Replies
    3
    Views
    2,477

    If your going to do it I'd do it beforehand while...

    If your going to do it I'd do it beforehand while you still have windows 8.1 installed and make sure everything is okie first.

    Bios flashback is probably the safest and best way of ensuring you...
  19. Don't trust XMP to set your settings correctly...

    Don't trust XMP to set your settings correctly I've found with this board.

    Also be prepared to see a ramp in your Vcore when increasing the speed of your ram especially under load from what you...
  20. Replies
    7
    Views
    4,961

    If you have a old vid card lying about you know...

    If you have a old vid card lying about you know works try swap it out for your current one and flip all but one ram stick out and give it a try.

    But as the others have stated its a Beep code,...
  21. If you download the Windows 10 image from MS now...

    If you download the Windows 10 image from MS now I'm told it will accept 7/8.1 install keys.

    Can't verify it myself not installed via that method yet.

    Cloning can take a lot longer but it can...
  22. Replies
    7
    Views
    2,912

    Or just use us as guinea pigs.

    Or just use us as guinea pigs.
  23. Replies
    7
    Views
    2,636

    Yes the self tuning process on this board is...

    Yes the self tuning process on this board is hopeless.

    I tried it and it uses 0.08 extra volts than it has to for the same overclock even then it was unstable, barring problems with corrupt bios's...
  24. Thread: Usb 3.0 bclk

    by Hawkstorm
    Replies
    11
    Views
    3,913

    I don't see why it should be. You could try...

    I don't see why it should be.

    You could try updating your Asmedia firmware there is a updated version floating around in one of the threads here that was posted by someone.
  25. Flip the card physically in the slots not just...

    Flip the card physically in the slots not just using the jumpers, and test each of them in slot 1.

    If that works try them in slots 1&2 ya I know its not recommended config but they should still...
Results 1 to 25 of 154
Page 1 of 7 1 2 3 4