Search:

Type: Posts; User: MeanMachine

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. That's good you sorted the problem Kritikill :D...

    That's good you sorted the problem Kritikill :D
    Did you get your RAM working at it's rated frequency OK?
  2. Because OC RAM come with many varying SPD (Serial...

    Because OC RAM come with many varying SPD (Serial Presence detect) values, there is no simple "one set off values" fits all. Much depends on the Systems hardware capability ie: PSU, CPU,...
  3. Your RAM are rated at 3200MHz therefore they are...

    Your RAM are rated at 3200MHz therefore they are OC RAM. Profiles such as XMP and D.O.C.P don't work as 3200MHz is above the JDEC standard. Your Bios would set for a lower safe frequency and to reach...
  4. Replies
    1
    Views
    573

    Hi Craftprinces :) Is your MB ROG STRIX X470-I...

    Hi Craftprinces :)

    Is your MB ROG STRIX X470-I GAMING? If so then yes the orange lit LED is a problem with RAM.
    Removing all RAM would not test your RAM and would indeed throw an error.
    Test...
  5. Replies
    9
    Views
    1,343

    From your photo, I can see your Boot_led is lit...

    From your photo, I can see your Boot_led is lit and this is because you have either no Storage device installed or something is wrong with it, either improper connections or the unit or adapter is...
  6. Replies
    9
    Views
    1,343

    DIMM slots are for RAM modules, review your MB...

    DIMM slots are for RAM modules, review your MB Layout again as they have nothing to do with your storage drives.
    Check your SATA connections for the correct connections (page 1-23 in your MB...
  7. Replies
    9
    Views
    1,343

    HI apocalypzez :) POST cycle will not...

    HI apocalypzez :)

    POST cycle will not continue until the error with your HDD or SSD is fixed and you will continue to get QCODE A2. You will receive an A2 error if you do not have any drive...
  8. Replies
    2
    Views
    363

    Intel speed step is used by tree huggers to save...

    Intel speed step is used by tree huggers to save a little power when at idle. It is usually on by default. Clever tech for what it does.
    As a power user I have disabled it (as well as C1E sleep...
  9. G.SKILL 16GB KIT DDR4 3200MHz CL14 Flare X for...

    G.SKILL 16GB KIT DDR4 3200MHz CL14 Flare X for AMD is OC RAM and therefore D.O.C.P profile will not work as they exceed the JDEC standard.

    If you check with CPUz in Windows (or the Tools section...
  10. Go into your Bios>Extreme Tweaker menu>AI...

    Go into your Bios>Extreme Tweaker menu>AI overclock Tuner and set to manual. This will allow you to change your multiplier.
    You can bring your Bios back to default by removing the MB CMOS battery...
  11. I think your misunderstanding a few things Tony....

    I think your misunderstanding a few things Tony.

    Your 3200MHz RAM would default to 2400-2666MHz initially as 3200MHz is beyond the JDEC standard and therefore you will have to manually enter your...
  12. Replies
    47
    Views
    3,009

    : Who told you that :mad: cause here's my one...

    :
    Who told you that :mad: cause here's my one hundredth time stamp for "ACCESS DENIAL"
    Access Denied

    timestamp: 2019-07-01 10:53:09
    event ID: 1135950231649268773910918305311897569673...
  13. Replies
    1
    Views
    431

    QCODE 00 is a hardware error and not necessarily...

    QCODE 00 is a hardware error and not necessarily a CPU error. It has also been found to be due to DIMMs training/failing or poor cabling conditions. In fact I have seen many posts determining it to...
  14. Yes those temperatures are abnormally high. ...

    Yes those temperatures are abnormally high. Always best to list your full system specs with these type of issues.

    First ensure the H100i pump is indeed operational and the heat sink brackets are...
  15. Replies
    47
    Views
    3,009

    I'm now marking all threads where Access Denial...

    I'm now marking all threads where Access Denial comes up with the following. "Unable to respond due to ACCESS DENIAL".
    It seems to be due to certain characters or by the size of the post, not sure...
  16. Replies
    3
    Views
    746

    Unable to respond due to ACCESS DENIAL.

    Unable to respond due to ACCESS DENIAL.
  17. Replies
    8
    Views
    714

    There is a Forum bug denying access to some...

    There is a Forum bug denying access to some threads, Why this is happening, well we don,t know and it's been happening for a while.
    I tried to respond with information for you without success. There...
  18. Replies
    8
    Views
    714

    unable to address your issue due to access denial

    unable to address your issue due to access denial
  19. Replies
    1
    Views
    189

    Hi joseleg :) Qcode 00 is not documented and...

    Hi joseleg :)

    Qcode 00 is not documented and generally considered to be a hardware fault found error, and difficult to diagnose the hardware culprit, however:

    Quote/ I test outside the case...
  20. When you hit the Power button to turn on the...

    When you hit the Power button to turn on the system, It goes through Post (Power on self test) where your hardware components are interrogated. Once all is OK then it boots to your OS. As your yellow...
  21. Replies
    47
    Views
    3,009

    Whatever it is, It's a bug and needs to be...

    Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
    Its been a week and nobody in admin or the Web master has done anything. What's going on...
  22. Replies
    47
    Views
    3,009

    Whatever it is, It's a bug and needs to be...

    Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
    Its been a week and nobody in admin or the Web master has done anything. What's going on...
  23. Replies
    3
    Views
    425

    Your not the only one with Bios issues, many...

    Your not the only one with Bios issues, many regarding USB Flashback via IO rear panel.
    Would you believe i'm still on 0804 original and as i'm having no issues i'm not going to touch it.
    My system...
  24. Replies
    47
    Views
    3,009

    Access Denial

    I've been denied access in response to a thread I wish to contribute to. Other threads I've responded to are no problem.
    The denial notice asked me to contact admin with details of the notice...
  25. Replies
    8
    Views
    1,906

    Hi lorenkos :) Can you access your Bios? If so...

    Hi lorenkos :) Can you access your Bios?
    If so have you tried updating Bios from within Bios using the EZ Flash 3 utility and not as you have done via the rear IO panel.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4