Search:

Type: Posts; User: Arne Saknussemm

Page 2 of 20 1 2 3 4 5

Search: Search took 0.10 seconds; generated 97259 minute(s) ago.

  1. Dont

    Dont
  2. Do you have the slow mode switch on? Strange...

    Do you have the slow mode switch on? Strange power plan settings?
  3. The CPU will throttle if it is too hot. And you...

    The CPU will throttle if it is too hot. And you have a small amount of thermal capacity in the block and water will move by convection slightly....so....all in all you should be OK if it was a short...
  4. :D Zka17 Just to add...t topology boards with...

    :D Zka17

    Just to add...t topology boards with 4 slots often run best with 4 sticks...4x8 instead of 2x16
  5. In Boot settings menu there is a delay timer in...

    In Boot settings menu there is a delay timer in seconds...often set to 3 seconds default....change that to 0?
  6. Try 1.36v for vcore at LLC5 for 5.1GHz and try...

    Try 1.36v for vcore at LLC5 for 5.1GHz and try 1.05v VCCIO and 1.1v VCCSA for the RAM.....you can also try....say....1.365v vor DRAM voltage

    Make sure long and short duration power package limit...
  7. Are there any updates on timeframe for this fix?...

    Are there any updates on timeframe for this fix?

    Thanks
  8. Replies
    383
    Views
    55,605

    Yes perfectly normal...as long as it doesn't hang...

    Yes perfectly normal...as long as it doesn't hang there for long ;)
  9. RealBench and Karhu RAMTest will reach the parts...

    RealBench and Karhu RAMTest will reach the parts other stress tests cannot reach...and quicker, without current degrading your CPU
  10. Just use BIOS flashback method to 1402....1502...

    Just use BIOS flashback method to 1402....1502 has many RAM kit problems...
  11. Replies
    383
    Views
    55,605

    AFAIK this is a known issue with armoury crate...

    AFAIK this is a known issue with armoury crate and is waiting a fix in the new version which is supposed to drop "soon"
  12. Replies
    383
    Views
    55,605

    To be honest I don't....I have tested it but it...

    To be honest I don't....I have tested it but it behaves the same as the previous one as far as OC performance and RAM stability for the stuff I am testing
  13. In many situations....extra what's can be fatal ...

    In many situations....extra what's can be fatal

    85467
  14. Replies
    383
    Views
    55,605

    It might not be official official...but if...

    It might not be official official...but if Shamino posts it, it's official and that's official...unofficially....
  15. Temperature is a huge influence on max boost ...

    Temperature is a huge influence on max boost

    That said you could try increasing max boost by 200MHz on PBO...this might free up the headroom a bit

    These CPUs need good watercooling to free...
  16. Use a good thin layer of paste. Prolimatech PK-1...

    Use a good thin layer of paste. Prolimatech PK-1 or Hydronaut

    Why? because they work well to transfer heat from your CPU

    Laziness to repaste is no excuse to run a thermal pad on a 3950X

    Do...
  17. Replies
    3
    Views
    203

    The AIO header is made for the AIO pump...the CPU...

    The AIO header is made for the AIO pump...the CPU header is for the Fans
  18. Replies
    9
    Views
    496

    It might work...it might not...as has been said...

    It might work...it might not...as has been said you should buy a single kit at the rated speed and density you want. Combining kits is a gamble.

    However if the CPU has a good IMC you might get...
  19. OK, good to hear!...airflow certainly helps a...

    OK, good to hear!...airflow certainly helps a lot!

    For 4.1GHz you might find you can lower from 1.3v...try 1.2...a bit of experimentation and you might find temps fall quite a bit...


    ...
  20. Replies
    3
    Views
    227

    That is entirely normal :)

    That is entirely normal :)
  21. This is most likely to do with memory...

    This is most likely to do with memory setting/stability

    Try raising Vdimm and/or SOC voltage....depending on what is currently set

    Maybe set pagefile size manually
  22. Yes, I was wondering if there was an obvious...

    Yes, I was wondering if there was an obvious contact problem....but fair enough...I get it's difficult to get to with 2 GPUs

    I don't think an NVME drive would do that much heating...but low...
  23. my pch registers 53 degress and the fan is never...

    my pch registers 53 degress and the fan is never spinning except at startup

    If you press the chipset cover with a finger....anything change?
  24. Yes, I think the cooler master will be better...

    Yes, I think the cooler master will be better than the stock fan.

    Try to optimise airflow through the case...maybe consider push/pull on the AIO cooler.

    AMD does run hot so 75/80 is not too hot...
  25. Use latest HWiNFO and check the PCH temp...if...

    Use latest HWiNFO and check the PCH temp...if it's still that high RMA the board
Results 26 to 50 of 499
Page 2 of 20 1 2 3 4 5