Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds; generated 26 minute(s) ago.

  1. Check the way the board is mounted...contact...

    Check the way the board is mounted...contact etc...and if you have a spare PSU check that...check the correct power cables are connected
  2. That should be OK. It really depends on you...

    That should be OK. It really depends on you finding the maximum airflow through your case.

    Goos fans on an AIO are a must but both your choices come with good fans so...

    Just ballance intake...
  3. https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview
  4. Probably the PSU if board and CPU are fine...or...

    Probably the PSU if board and CPU are fine...or the connections from the PSU
  5. Replies
    2
    Views
    76

    If the board supports it "BIOS Flashback" method...

    If the board supports it "BIOS Flashback" method is the most reliable ....followed by EZ Flash utility in BIOS
  6. Have tested this thoroughly with various CPUs and...

    Have tested this thoroughly with various CPUs and boards already....works great

    New AMD chipset drivers out too...

    All fine for my testing
  7. I haven't got around to this yet...too busy...but...

    I haven't got around to this yet...too busy...but you might look into VF offset curve.....looks like that might be the way to do it...?
  8. Crosshair VIII is a good board...the revision...

    Crosshair VIII is a good board...the revision coming for 5xxx series CPUs looks to be a very nice board,,,finally ASUS putting in the effort on AMD
  9. Nice one....they are workhorse GPUs when nothing...

    Nice one....they are workhorse GPUs when nothing fancy is needed :)
  10. No...i'm just suggesting a range of voltages to...

    No...i'm just suggesting a range of voltages to try...manual
  11. Connect the pump header to AIO header... ...

    Connect the pump header to AIO header...

    Connect fans to CPU header...or set CPU header to ignore monitoring if you are powering fans by some other means
  12. Replies
    349
    Views
    50,275

    One is WIFI version...one isn't....?

    One is WIFI version...one isn't....?
  13. Replies
    2
    Views
    96

    Yes....40 is wake from S4 sleep...BSOD from this...

    Yes....40 is wake from S4 sleep...BSOD from this might be unstable RAM

    Either way Windows might have re-activated fast startup in windows power menus
  14. While there are, indeed, plenty of things to play...

    While there are, indeed, plenty of things to play with in the BIOS....it can be quite simple to get a basic feel for the CPU

    If I were you I would set 1.36V and 47 multi...and then simply up the...
  15. I would try voltage tweaks first and then if that...

    I would try voltage tweaks first and then if that doesn't work...try relaxing timings

    You can also max current capability for RAM in Digi+ section
  16. Try setting system agent voltage higher...try a...

    Try setting system agent voltage higher...try a range....1.1v to 1.15...to 1.2v...set DRAM to 1.375 or 1.4
  17. You need a BIOS with AGESA 1.0.8.0 to boot with...

    You need a BIOS with AGESA 1.0.8.0 to boot with Zen 3/5000 series...so 2204 2206 on CHVIII....then update to AGESA 1.1.0.0 once those BIOS drop

    BIOS Flashback is the perfect tool for this on ASUS...
  18. I doubt this is helping ...

    I doubt this is helping

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

    but you might get lucky

    As for 5.0...there are plenty of...
  19. Maybe try to reflash the latest BIOS for the...

    Maybe try to reflash the latest BIOS for the board.... BIOS flashback method....
  20. I would start there, yes. Try changing DRAM...

    I would start there, yes. Try changing DRAM voltage to 1.35v and maybe 1.4 or 1.45..this is totally safe voltage for RAM

    Maybe look in BIOS at the system agent voltage setting...see what the board...
  21. This can of course be driver...

    This can of course be driver problems...especially if it's common to only one or two games...

    assuming it's not that the most common cause of such symptoms is RAM.

    I know it's an investment (I...
  22. Yes, this is backwards compatible with PCIe...

    Yes, this is backwards compatible with PCIe 3.0...just limited, of course, to 3.0 speeds.

    :)
  23. Replies
    7
    Views
    253

    OCing these GPUs can draw well over 350W...

    OCing these GPUs can draw well over 350W alone...with an OCd CPU and important headroom...you want to get a PSU that will be in the sweet spot of power delivery...not near its maximum. A good quality...
  24. Replies
    8
    Views
    269

    That board has a second BIOS chip...maybe flash...

    That board has a second BIOS chip...maybe flash current BIOS to it and see if the behaviour continues.

    I would avoid ebay for BIOS chips...many bad/non working
    ...
  25. The Zenith II Extreme is not the Zenith II...

    The Zenith II Extreme is not the Zenith II Extreme ALPHA

    The ZIIE still does not fully support the 3990X...i.e. RAM still only runs stock
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4