Search:

Type: Posts; User: PeZzy

Page 3 of 4 1 2 3 4

Search: Search took 0.00 seconds; generated 127339 minute(s) ago.

  1. Although the QVL list is dated March 16th and...

    Although the QVL list is dated March 16th and there has been a few BIOS releases since then.
  2. Both are possibly made from Hynix chips, while...

    Both are possibly made from Hynix chips, while the general consensus is that Samsung B-die is better for Ryzen.
  3. Jumper is meant for LN2. What BIOS are you...

    Jumper is meant for LN2. What BIOS are you running? Are you using a DVI connector or Display port to the monitor? Can you switch that?
  4. It's normal for the 1800x temperature to jump...

    It's normal for the 1800x temperature to jump around from 42 to 53 degrees C under non-OC conditions.
  5. The "8" error has happened to me in the past with...

    The "8" error has happened to me in the past with BIOS 9945, so it is not necessarily a CPU/socket problem. Could just mean the BIOS settings are not right.

    Hold down the clear CMOS button for 10...
  6. Replies
    74
    Views
    31,526

    DC is Direct Current as opposed to Pulse Width...

    DC is Direct Current as opposed to Pulse Width Modulation. You might want to contact your AIO seller for proper settings.

    As this motherboard has an option to disable Q-Fan, that looks like the...
  7. Per this post... ...

    Per this post...

    http://www.overclock.net/t/1624603/rog-crosshair-vi-overclocking-thread/15900#post_26106654

    There are two BIOS's 9943 and 9945. 9945 is apparently meant for motherboards with...
  8. Replies
    13
    Views
    5,552

    BIOS 9945 reduced my time from 24 to 21 seconds,...

    BIOS 9945 reduced my time from 24 to 21 seconds, but it is still pinging my Bluray drive during post and OS load.
  9. Replies
    74
    Views
    31,526

    What do you mean by "direct control"? The Q-Fan...

    What do you mean by "direct control"? The Q-Fan control should be disabled for the CPU if you are running an AIO. I plugged my AIO into the CPU fan header as per the manufacturer's instructions. I...
  10. The BIOS has bugs. Memory frequencies above...

    The BIOS has bugs. Memory frequencies above 3200Mhz do not display in CPU Z, but will display in other programs like HWINFO.

    Windows is unable to properly obtain the memory frequency with this...
  11. With 9945 and 4x8GB Samsung B, I can't do 3600Mhz...

    With 9945 and 4x8GB Samsung B, I can't do 3600Mhz with CL below 18.
  12. Replies
    13
    Views
    5,552

    Mine is usually 24.6 seconds and I hear my ATAPI...

    Mine is usually 24.6 seconds and I hear my ATAPI Bluray drive being constantly polled during startup. I think it is slowing things down, but I can see nothing in the BIOS to stop it from 'pinging'...
  13. Replies
    13
    Views
    5,552

    Check Task Manager - > Startup -> Last BIOS time....

    Check Task Manager - > Startup -> Last BIOS time. Mine is usually 22-24 seconds, but right now it is showing 55.1 seconds. o.O
  14. Can't find your Windows 7 key? When you do the...

    Can't find your Windows 7 key? When you do the free upgrade from Windows 7 to 10, your Windows 10 is an OEM version which is non-transferable. You can plead your case over the phone to Microsoft, but...
  15. Thread: Bios 1201

    by PeZzy
    Replies
    34
    Views
    18,364

    Maybe right-click on the page and select...

    Maybe right-click on the page and select 'refresh/reload'.
  16. Try between 40 and 60 for ProcODT. You can also...

    Try between 40 and 60 for ProcODT. You can also increase the Fail_CNT. Keep in mind that if the training fails, the values on this screen are reset.
    ...
  17. I run 4 DIMMs of this memory at 3200Mhz with no...

    I run 4 DIMMs of this memory at 3200Mhz with no BCLK overclock, but at 18-14-14-14-34 timings. My VDDSOC is 1.09 and DRAM voltage is 1.35.

    Take a look at VDDSOC Phase Control and ProcODT, instead...
  18. FYI...1107 is slightly worse than 0083 if you...

    FYI...1107 is slightly worse than 0083 if you have more than 16GB.

    Also try lowering your ProcODT to 40.
  19. Replies
    71
    Views
    44,057

    If you Google the problem, it's either a bad...

    If you Google the problem, it's either a bad motherboard or incompatible RAM.
  20. If you are trying to run that RAM at 3200MHz,...

    If you are trying to run that RAM at 3200MHz, that would be the cause of your retraining problem.

    You need to up the VSOC to at least 1.1v, set the DRAM timings at 18-16-16-16-38, and the RAM...
  21. Replies
    13
    Views
    21,802

    The power draw only comes from the molex...

    The power draw only comes from the molex connector. The 5 volt wires are not connected to the motherboard.

    This splitter is essentially an internal hub, since it is not drawing power from the...
  22. Replies
    13
    Views
    21,802

    USB 2.0 Header Limitation

    I have a Kraken X62 and a 2 front case USB connections. I would like to have them all connected. I have 2 USB 3.0 connectors using the 3.0 header.

    I bought this - 9-Pin USB Internal Header Y...
  23. What is your AI Overlock Tuner setting? If you...

    What is your AI Overlock Tuner setting?

    If you are not overclocking your CPU, make sure it is set to "Default". That seems to help the cold boot problem.
  24. Replies
    5
    Views
    2,339

    If you are using 4 sticks, you will likely need...

    If you are using 4 sticks, you will likely need to loosen the timings more than the RAM's rated latency. Don't know if later BIOS updates will help.
  25. Replies
    7
    Views
    6,609

    That's actually version 8.0.56336, but it seems...

    That's actually version 8.0.56336, but it seems to have fixed it. Thanks!
Results 51 to 75 of 79
Page 3 of 4 1 2 3 4