Search:

I would advice to give a try to the regular AURA software. The VGA can now be detected without having an ROG motherboard.

Can you try the fix from GeneralT001 by reinstalling 1.04.29 version and let us know if the LEDs are back and motherboard icon is recognized in Aura.



If you read the FAQ and latest changelog...

Sharing your fix.

For the ones having the same problem, please install the 1.04.29 version of AURA and report if it worked.

I already reported the issue to try to replicate. The problem we have right now is that it's hard to replicate. Our team is looking into it.

What is happening to your system isn't normal, especially the second part where the LED are blinking. Before sending to RMA, you could give last try by doing a clean install of Windows.


As...

Check the following.


Reboot your system and enter the BIOS. Open the main tab and check the field “LED EC”. Does a text is written in front?
YES, then go to Advanced -> Onboard Devices...

Which AURA devices do you have on your computer?

You probably need to calibrate the fan. To do so, go to the settings tab -> RGB header -> Calibrate -> Select the RGB header where you have the fan plug and follow the instructions.



Thanks for...

As Gofran and namoi asked, can you do the test without the ROG Gladius II plugged and see if your game and AURA run smoothly.

Note: Make sure that you also have the latest Armory with latest...

1. Uninstall AURA.
2. Run AURA CC Cleaner
3. Reinstall AURA.

Does lighting problem occur with other effects, or only Rainbow?
Do you do anything particular for it to crash?

Please add...

After checking with EK, they now add both RGB strips into the box - so the user can change from the 5V to the 12V if their motherboard do not have addressable header. As this monoblock can fit both...

I advice you uninstall both of the Corsair programs. In other users cases, uninstalling Corsair fixed out the issue.

My theory is that some of the lighting control command use the same channel,...

New version is already on it's way and we are expecting it to be release in a couple weeks - schedule might vary depending on our testing team results.

Right now, the 1.05.28 is quite stable, and...

Correct, I modified the link.

Let us know how it goes.

For your beeping issue, you can report it in the Rampage VI section to get some advice.

Strix VEGA 56 is supported by Aura software.

The drivers might be the issue if you have none of the VGA detected.

First you can try both of the AURA software. The latest AURA 1.05.32.02 or...

We are working on getting a better control of the addressable strip. Right now, you can adjust the settings up to 120 LEDs. For now when you apply an effect, let's say Rainbow and gradient, you can...

Thanks for the detail. I already reported your case, but we were not able to replicate at the moment. If you have any other useful detail, do not hesitate to share.

If any other user has the same...

Try the below steps for the problem you might have. You can also read the FAQ.

Motherboard is not detected


Make sure that the device is correctly connected to your system. Unplug and...

Can you specify which version or Armory you are using and the latest firmware installed on the PUGIO / GLADIUS II.

I know that if plugged incorrectly at first (with LED strip it already happened), then the LED can be damage.

What you can try is to plug another addressable strip or fan to that header and see...

Try this:
1. Enter your BIOS, Advanced -> ROG Effects -> Onboard LED -> Enable -> Save and reboot

If still do not work, when you booted in your OS, open task manager and check if you have...

You seem stuck with an older version.

1. Try to Kill all the Aura services that you can see from the task manager. and try to uninstall.
2. Run AURA CC Cleaner and try to uninstall through the 2...

Which EK monoblock do you have? The EK-FB ASUS ROG R6E RGB Monoblock - Nickel?

If so, check out the manual instructions from EK. You need to connect the cable to the Add Header located on the...

For now we've decided to stick to 120 LEDs. This limit is to prevent MB components deterioration from excessive current that would be necessary to power such number of LEDs.