Search:

Type: Posts; User: Pandur

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    9,627

    The M.2 ssds can use either the sata protocol or...

    The M.2 ssds can use either the sata protocol or pcie protocol for bus communication. Your motherboard supports the pcie protocol via the M2 slot. But your ssd uses sata. With the adapter you need to...
  2. Thread: I7 temps

    by Pandur
    Replies
    6
    Views
    2,534

    That's not technically true. There's no way to...

    That's not technically true. There's no way to get the CPU to produce 4KW, it'd melt loooong before that.

    A basic step when overclocking is increasing the TDP limits. Asus does this by default, or...
  3. Replies
    3
    Views
    1,796

    Yeah, sounds like your second slot is broken. If...

    Yeah, sounds like your second slot is broken. If I should make an educated guess, one of the lane switches is broken/stuck. But that's not something you can fix at home so get the board replaced if...
  4. My first thought is that the button on your tower...

    My first thought is that the button on your tower is broken. You can try shorting the two pins for the power button in the motherboard to test this. If it boots when you short the two pins but it...
  5. For once Nate is wrong. The Z97 motherboards have...

    For once Nate is wrong. The Z97 motherboards have PCIe lanes from the chipset as well as the cpu. And you can indeed use either the x4 or topmost x1 slot for a soundcard with SLi enabled. Check this...
  6. I know this answer is very late, but you change...

    I know this answer is very late, but you change the filename if you want to use the usb flashback feature. You don't have to rename the file to use the regular updater in the bios.

    Your clock...
  7. Thread: USB mouse

    by Pandur
    Replies
    4
    Views
    2,576

    Try disabling USB selective suspend in advanced...

    Try disabling USB selective suspend in advanced power settings. And make sure you use a usb 2 port.
  8. Thread: Kernel Event 41

    by Pandur
    Replies
    3
    Views
    2,159

    Have you done a clean install of Windows or is...

    Have you done a clean install of Windows or is this a dirty upgraded version? I've seen similar problems when you upgrade from W7 to W10 for example. But your PSU is also a very good candidate, do...
  9. Replies
    4
    Views
    3,118

    Your motherboard should have the option to set...

    Your motherboard should have the option to set fan failure alarms for all chassis headers as well as the cpu header. And if you run a temp monitor program of some sort you will see that the temps are...
  10. Replies
    4
    Views
    3,118

    I have run AIO kits with the pump connected to...

    I have run AIO kits with the pump connected to cpu_opt and the fans to cpu_fan before and this worked perfectly for me. Pump would run full speed all the time from the opt header and the cpu_fan...
  11. You need to verify that your bios have this flaw....

    You need to verify that your bios have this flaw. My first thought is that you've entered these values in a bios which doesn't have the multipliers and your cpu is constantly throttling. Which is...
  12. Replies
    2
    Views
    2,785

    You will get noise if Mic boost is maxed out. If...

    You will get noise if Mic boost is maxed out. If so, turn it down at least one notch. You will also get noise if your computer is not properly grounded. So make sure it's wired properly. Noise can...
  13. Replies
    6
    Views
    3,693

    Yeah sounds like the board is a loss. I wouldn't...

    Yeah sounds like the board is a loss. I wouldn't risk damaging more hardware trying to fix this. Accept it's a wreck and move along.
  14. Replies
    5
    Views
    2,458

    He probably put the ram in two slots on one...

    He probably put the ram in two slots on one channel (the different coloured slots next to each other). Move the ram to slots #2 and #4. Or any combination of the same colour will work.
  15. Try swapping the cables from one drive to the...

    Try swapping the cables from one drive to the other. To eliminate the motherboard and cables from the equation. If they perform the same afterwards you can be certain there's a problem with your...
  16. Replies
    3
    Views
    3,151

    You're aware that the BD PROCHOT is a...

    You're aware that the BD PROCHOT is a bi-directional signal that clocks down your processor due to either an overheating processor OR motherboard?

    In many cases this issue is caused by boiling hot...
  17. Yes you pick the stripe size in the bios when you...

    Yes you pick the stripe size in the bios when you create the raid array. Your low stripe size is a possible cause to your problem. Have you fiddled with the NTFS block size or is that the stock 4K?...
  18. Replies
    1
    Views
    5,097

    My understanding is that yes you can use NVMe...

    My understanding is that yes you can use NVMe ssds in the m.2 port. But you're limited to PCIE x2 gen 2 speeds. Since that's all the spare lanes the motherboard got. So you won't get superspeed out...
  19. Replies
    2
    Views
    2,613

    Well, first I would reinstall Windows. Since...

    Well, first I would reinstall Windows. Since that's less of a hassle than a RMA process. If that doesn't help, I would say get that motherboard replaced.
  20. Replies
    5
    Views
    2,178

    Well, it only supports crossfire with 3. What you...

    Well, it only supports crossfire with 3. What you can check before giving up is what setting the x4 slot is on in the bios. Make sure it's at x1. Otherwise you disable the x1 slots when you insert a...
  21. 16k stripe size is to small imho. Rebuild your...

    16k stripe size is to small imho. Rebuild your raid and go with 64k or 128k. And the above post about secure erase is overkill and then some. Unless you have stone-age ssds without garbage collection...
  22. Trouble with PCE-AC68 wireless on Maximus VII Hero

    Hi.
    I got an Asus Maximus VII Hero motherboard that refuses to find my Asus PCE-AC68 wireless card. The wireless card works in two other computers I have so it's not dead.
    Other relevant hardware:...
  23. Replies
    14
    Views
    17,890

    Hate to break this to you, but you've ordered...

    Hate to break this to you, but you've ordered basically the same SSD twice. The difference between PM951 and SM951 is the NAND chips used. They're both PCIE SSDs.

    You need a SATA3 M.2 SSD for your...
  24. You can download the latest version here...

    You can download the latest version here. Or from any current laptop support page really. Update: Found a newer version of the ATK package, v1.0.0042. Get it from the link earlier in this post....
  25. I downloaded the newest ATK package I wa able to...

    I downloaded the newest ATK package I wa able to find at the Asus website for my G55VW. And it's working perfect. Did not find it under the G55VW category though.
Results 1 to 25 of 165
Page 1 of 7 1 2 3 4