Search:

Type: Posts; User: altonatrucker

Search: Search took 0.00 seconds.

  1. intel extreme tuning utility and prime 95

    intel extreme tuning utility and prime 95
  2. Looks like the new 0505 bios release for the...

    Looks like the new 0505 bios release for the encore board has fixed the xmp profiles issue, i can now set to XMP and boots right up at 4266MHz. Hurray !!!
  3. Replies
    26
    Views
    2,159

    Well this is the first bios for the encore board...

    Well this is the first bios for the encore board that lets me put the AI Overclock to XMP and it will boot with my 4266MHz ram in it. Every other bios i have had to set the memory to manual and...
  4. Yes it is, now i have been able to get my Gskill...

    Yes it is, now i have been able to get my Gskill 4266 ram with timings of 17-18-18-38 to run at 4200 stable on this encore motherboard with timings of 17-17-17-37 and 1.46v This with an i9-10940X...
  5. What are the performance counters in device manager ?

    So only when i install a new 10th gen cpu such as the 10980XE or 10940X in my device manager i show 4 performance counters with the little error sign by them no drivers installed, if i install a...
  6. I'm using the 0504 bios on mine, but i had the...

    I'm using the 0504 bios on mine, but i had the same issues with the 0401 bios as well.
  7. OK so after trying several set of ram from the...

    OK so after trying several set of ram from the QVL list and not getting any of them to work with the stated XMP profile i went a different route. the gskill ram on the asus qvl list was not on the...
  8. Replies
    6
    Views
    752

    Yeah this is the same as what mine does, only...

    Yeah this is the same as what mine does, only when the power supply is shut off does it do it, other then that all is fine.
  9. Replies
    6
    Views
    752

    I have no issues at all with SLI on this board,...

    I have no issues at all with SLI on this board, i'm using dual EVGA 2080ti Kingpins with the Asus Nvlink. My biggest problem is the memory, i'm still having alot of trouble with XMP profiles.
  10. Replies
    145
    Views
    18,024

    Yeah i have the Signature V2 from optimus, i...

    Yeah i have the Signature V2 from optimus, i bought the raw copper standard intel setup and it works great, just have to remember to use the block with the optimus signature stamp either on top or...
  11. Replies
    16
    Views
    4,584

    My point is with the Encore i have tried 2...

    My point is with the Encore i have tried 2 different sets of 4000MHz, and a set of 4266MHz and now the 3866MHz and none of them will run at the specified timings and frequency but they will all run...
  12. Replies
    16
    Views
    4,584

    That was for sure a good deal for that combo. I...

    That was for sure a good deal for that combo. I have been using an Omega and loved the board overclocking ram and the cpu was a breeze, i now have the Encore and its a very unstable board for me...
  13. So i ended up getting some of this ram Gskill...

    So i ended up getting some of this ram Gskill TridentZ RGB F4-3866C18Q-32GTZR which is on the QVL list for this Encore motherboard and can't get it to boot with it either unless i set it at 3200 or...
  14. Replies
    27
    Views
    2,729

    Yeah i just meant as far as 2x8 and 1x6 as the...

    Yeah i just meant as far as 2x8 and 1x6 as the main 12V connections, there has been several with 1x8 with 1x6 or 1x8 with 1x4 and then the extra connection for extra vga's but this one has 2x8, 1x6,...
  15. Replies
    27
    Views
    2,729

    I have both 8-pin and the 6-pin connected as well...

    I have both 8-pin and the 6-pin connected as well but don't really need the 6-pin connected. I have never used the thermal sensors so can't be of help there. It was kind of confusing though when you...
  16. Replies
    27
    Views
    2,729

    I don't think so, i think this is the first board...

    I don't think so, i think this is the first board with 2x8 pin and 1x 6 pin connections on it.
  17. Have you tried just deleting the folders that are...

    Have you tried just deleting the folders that are still in the program files?
  18. What cpu are you using in your encore board?

    What cpu are you using in your encore board?
  19. Yeah i did the manual settings as well with no...

    Yeah i did the manual settings as well with no luck, already have the newest bios in it. I do have another board being delivered today so i will see if the same problems are with it as well, if so...
  20. Rampage VI Extreme Encore XMP Ram Profiles

    So i am curious, is anyone using high frequency ram like 4000 or 4266 on there Encore motherboard that is not on the QVL list? I have tried 3 different sets of DDR4 memory. 2 Sets of 4000MHz and a...
  21. Replies
    10
    Views
    901

    The 0402 bios on the website should not be used...

    The 0402 bios on the website should not be used they were a faulty bios and everyone was having issues with it. The newest bios is 0504 and i flashed it with no problems the first time. I'm running a...
  22. Replies
    96
    Views
    4,612

    I can say my board is completly stable with the...

    I can say my board is completly stable with the 0504 bios. My system is all water cooled with seprate loops for video cards and cpu. Mine is overclocked i9-7980XE @ 4958 all cores and DDR4 4000 Ram...
Results 1 to 22 of 22