Search:

see if this is helpful
https://www.makeuseof.com/maximize-window-multiple-monitors/

I don't have to look to know what works and doesn't (I run enough computers to know) and don't have any allegiance to crap products or hardware, no matter who makes them. Your comments are not...

Yeah, not with Intel AX210, you did, did you ?

Drop Intel AX210 in it and never think about this again, because the problem is solved.

The only difference between trial version and the real one is the licence file "pkey.txt" and never seen Aida64 overwrite this file on an installation, but taking a copy is good idea.

Check the BIOS battery, maybe even try a new one first, not expensive but might be the issue.

Nvidia published this https://developer.nvidia.com/blog/using-nsight-systems-for-fixing-stutters-in-games/ might be helpful in identifying the root cause of stutters ?

Not sure, but looking there appears to be a Utility for Adia64, and something called live-dash ?
https://www.asus.com/US/supportonly/ROG%20RYUJIN%20II%20360/HelpDesk_Download/...

What do you mean by control ?

An AIO pump flows at a set rate, it is not variable.

Put your ram in slots 2 & 4 from the CPU.

4.9 GHz is a factor for a single core, not all cores.

Just disable it and add whatever you want on a riser card.

CSM-> Disable and see if the issue is still present. You most likely need to reinstall windows correctly with CSM disabled.

Flck 1800 & DDR4@3600 should be fine, if not, raise the SOC Voltage to max of 1.1v but 1.0v should work.

(1) Are you putting the kits in ram slots 2 & 4 from CPU.
(2) Do you have both power connectors above the CPU on the left hooked up.
(3) What are you using for cooling solution on the CPU and is it...

Run Intel Driver Assistant
https://www.intel.com/content/www/us/en/support/intel-driver-support-assistant.html

Eight months of 'ok' is really a good result, but I'm wondering if you maybe were not using DOCP profile and was loose & slow enough at default to just not be present.

The system, if set DOCP...

T-Group Ram, you mention, its config 4x16 (is that two kits of 2x16) with 'TF4D432G3600HC18JDC01' as that is 2x16 kit.

From what I read of your posts, you have a memory issue going on. Try using...

At a guess, you may have corrupted the installation of windows. You have near to top-of-line CPU and bottleneck for power being supplied to the motherboard.

Connect both E-ATX as recommended

Set DOCP profile for your RAM

Procedure for install of windows on a new NVMe drive.

Enter BIOS, Advanced mode,

1 - Make sure you unplug all SATA and USB...

I would try running the motherboard, in the motherboard box, but I also agree code 00 is CPU DOA unless standoff screw on board causing issue or overtightening of the heatsink.

Any chance overtighten cooling solution (cpu heatsink), back it off 1/4 turn on the screws.

Maybe try blowing away the Nvidia drivers with Display Driver Uninstaller (DDU) and reinstall the latest, does not appear like monitor issue to me.

Do you happen to have any codec packs installed,...

Computer management, storage, disk manager snap in, unmount the device.

You could also disable the device driver, but the above is a nice way.

What is the actual purpose ?

Try running the tests here https://www.eizo.be/monitor-test/