Search:

Type: Posts; User: Shark007

Search: Search took 0.00 seconds.

  1. I have had this identical issue with 2 different...

    I have had this identical issue with 2 different GPU's on a z590 board
    One was an amd XFX 580 and the other was an nvidia ASUS 1060
    The solution was to update the firmware of the GPU.
  2. Replies
    3
    Views
    318

    search for - type e to type c type e is the type...

    search for - type e to type c
    type e is the type of connector on the motherboard
    this is what my z590 uses. I'm sure the 690 uses the same motherboard port.
  3. Have a look in this thread . . ....

    Have a look in this thread . . .
    https://rog.asus.com/forum/showthread.php?126062-Z590-E-with-Dual-Video-(OnBoard-Radeon-RX5700
  4. Most likely, you need to be connected to the...

    Most likely, you need to be connected to the graphics card on boot (not the iGPU)
    for the options to be present.
  5. My motherboard is a Prime Z590-A I assumed your...

    My motherboard is a Prime Z590-A
    I assumed your bios would be similar to mine - guess not.
    90280
  6. BIOS / Advanced Mode / Advanced / System Agent

    BIOS / Advanced Mode / Advanced / System Agent
  7. Replies
    4
    Views
    275

    Wifi 6 = use the upper end of the 5ghz band ...

    Wifi 6 = use the upper end of the 5ghz band
    this is not part of dual band with 2.4 and 5ghz = it is its own thing

    wifi 6e = use the full 6ghz band

    FYI, routers that support wifi 6e are rare...
  8. You have taken my response out of context. I was...

    You have taken my response out of context.
    I was replying to an inquiry about driver compatibility for Windows 11.

    To answer your question directly, I mostly use HDMI from the gpu to an AVR or...
  9. using a Prime Z590-A /11700k /WiFi 6e /BT5.2 I...

    using a Prime Z590-A /11700k /WiFi 6e /BT5.2
    I have both the release build and the Dev build of Windows 11 installed on different M'2's on this system.
    All drivers posted by MoKiChU have worked...
  10. Replies
    6
    Views
    1,615

    Turn OFF the Fan AI in Fan Expert.

    Turn OFF the Fan AI in Fan Expert.
  11. I went over to the EVGA Forums and gave your post...

    I went over to the EVGA Forums and gave your post a bump with the information I shared here.
    Maybe that'll get someone's attention that will be able to help you out.
  12. I can tell you that while working with a prime...

    I can tell you that while working with a prime z590-a recently, I encounter this same issue with both an asus 1060 and an xfx rx580
    After updating the bios on both of these gpu's, the issue was...
  13. check this part number, 03G-P4-6162-KR If that...

    check this part number, 03G-P4-6162-KR
    If that matches, its this bios, https://www.techpowerup.com/vgabios/186062/evga-gtx1060-3072-160725
  14. Yes. I called it firmware so that you would...

    Yes. I called it firmware so that you would differentiate it from the motherboard bios.

    Use this source for the update...
  15. As previously posted . . . This can be done...

    As previously posted . . .


    This can be done on any system that gets into Windows.
    After updating the Firmware, move the GPU back to the system that failed in the past.

    EDIT: Firmwares are...
  16. I've experienced this issue on a z590 board with...

    I've experienced this issue on a z590 board with both an AMD RX 580 and a Nvidia GTX 1060.
    I worked around the problem but using the iGPU to get to Windows.
    Once you get into Windows, the solution...
Results 1 to 16 of 16