Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    18
    Views
    238

    Hello, This is because Memtest86 has limited...

    Hello,

    This is because Memtest86 has limited scope when it comes to testing memory stability outside of Windows, and should really be used to test if sticks are faulty or not, without XMP or any...
  2. Hello, A core temp variance of up to 15c is...

    Hello,


    A core temp variance of up to 15c is not uncommon on past varients and there's no reason why Alderlake would be any different.
  3. Hello, What makes you think they're switching...

    Hello,

    What makes you think they're switching off as opposed to it simply being a polling error?
  4. Hello, tRC needs a minimum value of...

    Hello,

    tRC needs a minimum value of tRAS+tRP, the boards default to the tightest value. You can try and lift tRAS to increase tRC and see if stability improves. You'll likely find it won't have...
  5. Replies
    3
    Views
    176

    Hello, You need to look at the Tweaker page...

    Hello,

    You need to look at the Tweaker page within the UEFI and look at the predictions, including per core usage.
  6. Replies
    3
    Views
    176

    Hello, AI Tweaker predicitions this gen...

    Hello,

    AI Tweaker predicitions this gen actually beats out manual overclocking in most cases. By themselves will get you 90% of the way there in most cases, if not all the way. That's largely why...
  7. Hello, M.2_1 will utilise CPU lanes - GPU will...

    Hello,

    M.2_1 will utilise CPU lanes - GPU will operate at 8X


    M.2_2 will utilize chipset lanes - GPU will operate at 16X

    Both slots are GEN 4.0
  8. May not uncover anything, but might want to try...

    May not uncover anything, but might want to try running Latencymon and see if it flags anything.

    https://www.techspot.com/downloads/6944-latencymon.html
  9. Hello, 1.5v is normal for this platform and is...

    Hello,

    1.5v is normal for this platform and is intrinsically related to how Zen handles idle voltage and parks cores. Many Intel users fall trap to these levels when crossing over to team red.
    ...
  10. Replies
    3
    Views
    183

    Hello, Are you using Prime? Prime95 AVX...

    Hello,

    Are you using Prime?

    Prime95 AVX workloads have a 51X ratio cap irrespective of user-applied settings.
  11. Replies
    2
    Views
    323

    Need more info, please. Memory kit PN? 64GB...

    Need more info, please. Memory kit PN?

    64GB may need more VCCSA voltage. Try 1.3 1.35v.
  12. Aside from attempting to use the assistant, best...

    Aside from attempting to use the assistant, best to plug in each of one's peripherals/USB Devices until the error is visible within Device Manager to isolate the device.
  13. Hello, 50C is fine and well within operating...

    Hello,

    50C is fine and well within operating limits. Mileage will vary depending on ambients
  14. Hello, This has already been answered for you....

    Hello,

    This has already been answered for you. PBO will operate within voltage, temperature, and current limits. Therefore upgrading your cooling capacity will aid in maintaining a higher peak...
  15. Replies
    2
    Views
    154

    Hello, Try the following. Activate XMP Profile...

    Hello,

    Try the following. Activate XMP Profile 1 and enter the below manually

    VDD 1.3v

    VDDQ 1.35v

    TXVDDQ 1.3v
  16. Hello, Can you confirm if this happens with...

    Hello,

    Can you confirm if this happens with the system at Optimised Defaults in the UEFI (no XMP or any overclocking).
  17. 1) Yes, the GPU will revert to 8x lane speed. ...

    1) Yes, the GPU will revert to 8x lane speed.

    2) Yes, PCIE 4 & SATA modes are supported

    Anything pertaining to slot configuration and lane speed should be available in the manual ;)

    I...
  18. But not together, right? Memory sold as a kit...

    But not together, right?

    Memory sold as a kit is binned in the density they are sold in. As soon as you combine them, you eat into the guardband put in place by the memory vendor designed to...
  19. Lesson here, read the manual if unsure ;)

    Lesson here, read the manual if unsure ;)
  20. Hello, Try the following: VDD 1.2v VDDQ...

    Hello,

    Try the following:

    VDD 1.2v

    VDDQ 1.2v

    TXVDDQ 1.2v
  21. Joining the party with my personal rig. Only have...

    Joining the party with my personal rig. Only have Micron 4800C38 at the moment (5200 C32)

    3x 54c 5x 53c 1x 52c 1.37v 12900KF - Apex

    Not the best silicon, but as always it is what it is.
    ...
  22. Replies
    13
    Views
    248

    Hello, The F series CPU is a locked CPU. The...

    Hello,

    The F series CPU is a locked CPU. The only way to overclock them is to use BCLK.
  23. If people are using Channel B1 and B2 for 2x DIMM...

    If people are using Channel B1 and B2 for 2x DIMM configuration then you're only using a single channel, which is easier on the IMC and memory.

    Use A2 and B2 as per the manual.
  24. Replies
    19
    Views
    1,182

    Hello, I personally managed to pick up a set in...

    Hello, I personally managed to pick up a set in the UK of Kingston Fury 4800C38. They were actually in stock for quite a few days but now sold out (around 30 kits).

    Unfortunately for any...
  25. Hello, Try increasing VDD and VDDQ to 1.25v

    Hello,

    Try increasing VDD and VDDQ to 1.25v
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4