Search:

Type: Posts; User: davemon50

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. The rounded port is a Type C. And the thing in...

    The rounded port is a Type C. And the thing in your photo above is the smaller form factor 3.1 type header connector, so you'll need to use an adapter as I mentioned above. Your board doesn't have...
  2. Try running Windows in safe mode, or checking for...

    Try running Windows in safe mode, or checking for lines in the BIOS to see if it's a Windows driver conflict.

    Try plugging the monitor into another computer also, if the lines show up it will be a...
  3. Replies
    6
    Views
    91

    You are using wired LAN? Then have you disabled...

    You are using wired LAN? Then have you disabled Wi-Fi?

    Do you have the dual band antenna plugged into the back panel?

    What are your Intel Lan and ERP settings in BIOS?

    Have you installed...
  4. Replies
    1
    Views
    67

    AC series is plagued with mouse problems, it's...

    AC series is plagued with mouse problems, it's likely not your own setup. Have you tried a Ubisoft forum? That's your best bet.
  5. Replies
    4
    Views
    99

    I shall remember that should it happen again. ...

    I shall remember that should it happen again. Everything seems(?) to be working normally now, knocking on wood in several locations. I am wondering now if the combination of multitask windows and a...
  6. Replies
    4
    Views
    99

    I restored defaults within BIOS within the Exit...

    I restored defaults within BIOS within the Exit menu Load Optimized Defaults, so basically yes same as F5.

    Gremlins sounds as plausible as anything else right now. Very strange.
  7. Replies
    4
    Views
    99

    Computer had a meltdown

    I'm just wondering if anyone has a suggestion for me for diagnostics on my computer. Today it had a complete meltdown. :( My computer is in my specs, basically RVE10 with Intel i7-6950X and...
  8. Replies
    1
    Views
    148

    I posted this thread 2-1/2 weeks ago. Based on...

    I posted this thread 2-1/2 weeks ago. Based on zero responses I have concluded two things:

    1. Although Asus has participated heavily in this gaming KB section, not a single Asus response to this...
  9. What did Asus tell you when you asked them if...

    What did Asus tell you when you asked them if this RAM was suitable for your machine? I don't see any QVL for it, is there one?
  10. You might be a fat-finger (or lazy) typer like...

    You might be a fat-finger (or lazy) typer like me. I use Smart Gesture and it does work, but I found myself re-activating the touchpad inadvertently on my own because my thumb knuckles would...
  11. If those are Bluetooth-also headphones, make sure...

    If those are Bluetooth-also headphones, make sure it's not connecting via BT, since that audio sucks IMHO. Disable BT and make sure you're getting the wired connection. It may have switched to BT...
  12. Replies
    1
    Views
    77

    If the machine is still under warranty from the...

    If the machine is still under warranty from the retailer I'd suggest returning it or having them look at it. But do you have a question? Or is this just an observation.
  13. Replies
    6
    Views
    231

    So you have two memory kits though per your...

    So you have two memory kits though per your previous post? Or just one kit with two sticks? That's the distinction I was making, if you actually have two different kits try taking one kit out and...
  14. Replies
    6
    Views
    231

    If you go to your support page for your...

    If you go to your support page for your motherboard, and then go to the CPU/Memory tab and select the Memory and Device subtab, you will find a QVL for memory kits. Look for your exact kit under the...
  15. Replies
    6
    Views
    231

    Are you overclocking anything? Is your memory a...

    Are you overclocking anything?
    Is your memory a single kit?
    Is the memory kit on the QVL?
  16. xeromist has a good answer, but Just to offer you...

    xeromist has a good answer, but Just to offer you another option, I replaced mine and used new pads. THESE PADS are inexpensive and good quality pads and packaging. And you have two Samsung drives,...
  17. Replies
    4
    Views
    142

    Try going into BIOS and turning off internal...

    Try going into BIOS and turning off internal graphics. Choose PCIe instead of Auto if you have the option
  18. Yes, that was what my comment said. But you'd...

    Yes, that was what my comment said. But you'd have to try it.
  19. These are PCIe 3.0 devices. Your board only...

    These are PCIe 3.0 devices. Your board only supports PCIe 2.0 so even if it were recognized you wouldn't get the rated speeds.
  20. Replies
    4
    Views
    142

    Turn your monitor on before the computer or leave...

    Turn your monitor on before the computer or leave it in sleep mode instead of turning it off.
  21. Any success with those BIOS changes?

    Any success with those BIOS changes?
  22. What did you mean by your response in #3? Reseat...

    What did you mean by your response in #3? Reseat was referring to the GPU (PCIe graphics card) not the CPU. You indicated about another chip.
  23. Wow I just typed up a 4-paragraph response to...

    Wow I just typed up a 4-paragraph response to you, and then the forum just gave me a lousy access-denied and wiped it all out! Let me try again.


    First, are you sure that the case has a Gen 2...
  24. Before you asked the question I was thinking it...

    Before you asked the question I was thinking it was 2A, but your manual says 3A for each of the three headers you have (1 addressable, 2 not). I advise you not to overamp it.
  25. I advise disable CSM in your BIOS. Caused M.2...

    I advise disable CSM in your BIOS. Caused M.2 issues for me, might also work for you.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4