Search:

Type: Posts; User: Silent Scone@ASUS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 9 minute(s) ago.

  1. Hello, No, the memory IC type will not help...

    Hello,

    No, the memory IC type will not help you obtain higher core clocks. It isn't likely to make any difference at all.
  2. Please remember that manual tuning of VSOC can be...

    Please remember that manual tuning of VSOC can be required depending on the strength of the memory controller. Most samples will operate within the range of 1.00 to 1.15v.
  3. The nature of updating firmware really lends...

    The nature of updating firmware really lends itself to integral tools like EZ Flash and USB Flashback. There's no need to use AI Suite for this function, nor would I recommend it.
  4. Hello, Those values are ok for this platform...

    Hello,

    Those values are ok for this platform and are as such to accommodate CPU with weak memory controllers. If you wish to tune these values to the capability of your CPU, you can do so.
  5. Please do not post GPU related discussion in...

    Please do not post GPU related discussion in general. There is a clear section for NVIDIA GPU discussion available.
  6. Please try the method posted above.

    Please try the method posted above.
  7. Have you tried since I posted the above?

    Have you tried since I posted the above?
  8. Please use the following. 1. Go to Settings &...

    Please use the following.

    1. Go to Settings & Functions then Edit Profile

    86148

    2. Click on Edit Avatar

    86149
  9. Please submit a bug report in the Armory Crate...

    Please submit a bug report in the Armory Crate thread.
  10. Most likely a device that is connected to the...

    Most likely a device that is connected to the system is causing the issue. Try sending the system to sleep whilst removing one device at a time until the issue desists.
  11. Hello, Did you attempt to use a profile from...

    Hello,

    Did you attempt to use a profile from the previous build when this occurred?

    What method did you use to flash 2206?*
  12. Yes, use FB to flash to the latest UEFI and...

    Yes, use FB to flash to the latest UEFI and report back. You may want to try removing the CPU and cooler and reseating it, too.
  13. Hello, please report this in the Armory Crate...

    Hello, please report this in the Armory Crate Support thread using the template in the OP.


    https://rog.asus.com/forum/forumdisplay.php?311
  14. Replies
    2
    Views
    446

    Hi, No, this seems like a permissions issue.

    Hi,

    No, this seems like a permissions issue.
  15. Replies
    9
    Views
    496

    Hello, Which part of the statement is...

    Hello,

    Which part of the statement is confusing?

    XMP I is the validated board profile that you will have seen on past generations. Every time a board is validated, this profile is the one used...
  16. If you find it boring, feel free to present some...

    If you find it boring, feel free to present some evidence to the contrary as I mentioned to you in the other thread :)

    See the latter part of my above post, increasing VDIMM is a remedy for...
  17. Hello, By looking too hard at VDIMM readings...

    Hello,

    By looking too hard at VDIMM readings you are leading yourself up the garden path. If you need to apply more voltage for stability, than by all means apply it. However, the amount of...
  18. Replies
    13
    Views
    308

    X99 is an old platform, you'd need to check the...

    X99 is an old platform, you'd need to check the QVL and then cross-reference that with kits you can find in stock for best chance of compatibility with your CPU....
  19. Replies
    8
    Views
    374

    Hello, Remove the CPU cooler and CPU. Check...

    Hello,

    Remove the CPU cooler and CPU. Check for bent pins within the socket, then reattach the CPU and cooler whilst checking for even mounting pressure.

    Also check that stand the motherboard...
  20. Replies
    13
    Views
    308

    Hello, capacity depends very much on your...

    Hello, capacity depends very much on your workload.

    32GB is ample for a gaming system / 64GB for a capable work station.

    Look for a singular kit of either capacity binned for 3200MHz that is...
  21. Hello, are you measuring this from the socket?...

    Hello, are you measuring this from the socket? Please see my previous post. There isnt an issue with VDIMM, but if wanting to present some conclusive data, you would need to use a scope with an...
  22. Hi, Are you able to try again now, please?

    Hi,

    Are you able to try again now, please?
  23. Hello, Testing previous settings on my...

    Hello,

    Testing previous settings on my personal rig show no noticeable reduction in memory stability between build 1201 and 2103. 4x8GB F4-4266C17-8GTZR @ 3733 C14.

    Memory subsets all in auto...
  24. Replies
    8
    Views
    374

    Hello, If using Adaptive Vcore, it's common...

    Hello,

    If using Adaptive Vcore, it's common that more voltage is needed over a fixed/manual voltage due to the change in load transitioning. It is also preferable to increase Vcore if...
  25. Replies
    9
    Views
    496

    Hello, topic covered here: ...

    Hello, topic covered here:

    https://rog.asus.com/forum/showthread.php?106270-XMP-1-and-XMP-2-difference
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4