Search:

Type: Posts; User: jacks12345

Page 3 of 4 1 2 3 4

Search: Search took 0.00 seconds; generated 33864 minute(s) ago.

  1. Thread: Q Code Ad

    by jacks12345
    Replies
    25
    Views
    27,938

    Hi Hopper, unfortunately, the "Ad" Q-Code doesn't...

    Hi Hopper, unfortunately, the "Ad" Q-Code doesn't tell us much: It simply states it's "Ready to Boot". The majority will assume that it's still instability and they are probably right. This...
  2. Replies
    36
    Views
    12,675

    This story may not apply to you, but after...

    This story may not apply to you, but after several days of PC issues, something "magical" happened.

    I kept getting the dreaded "bd" codes all over again. The times that I could get into Windows,...
  3. No problem. As you may have seen in another post,...

    No problem. As you may have seen in another post, I had to bump up my Vcore as well to get it stable using BIOS 0802, but I'm kinda worried I'm pushing it too hard for the long-term. 1.34v is kinda...
  4. Hopper, this is what I suggest. Go ahead and buy...

    Hopper, this is what I suggest. Go ahead and buy it and send it to me. I will test it for you to ensure it will work. I will mail it back to you when I'm finished testing it. Pleased be advised it...
  5. Replies
    206
    Views
    92,356

    I want to get an idea from others that have a...

    I want to get an idea from others that have a 5960X (or even other Haswell-Es) and BIOS 0802. I noticed in order to get my CPU stable at 4.25Ghz, I had to bump up my Vcore to 1.34v to achieve...
  6. Thread: Q Code Ad

    by jacks12345
    Replies
    25
    Views
    27,938

    Your cache ratio and voltages are at default....

    Your cache ratio and voltages are at default. Everything else looks fine also. It could still be your Core Voltage, but there is no clear answer. I often underestimate what the CPU actually needs to...
  7. Thread: Q Code Ad

    by jacks12345
    Replies
    25
    Views
    27,938

    Although people like Chino and Praz may have...

    Although people like Chino and Praz may have better ideas, I sometimes like to throw my opinions out there:

    1. You still may not have enough CPU Vcore. You may need to up it 0.01v or 0.02v.
    2....
  8. Replies
    36
    Views
    12,675

    I certainly wouldn't rule out Chino's advice and...

    I certainly wouldn't rule out Chino's advice and list of causes. If what I said doesn't work, you've inspected your CPU socket, and you've run your system at stock speeds and still get the error, it...
  9. Replies
    5
    Views
    3,253

    If it's telling you to change your pagefile, and...

    If it's telling you to change your pagefile, and you are running 16GB of RAM, that means RealBench can't run because it will crash your OS. When attempting to run Realbench, it will attempt to test...
  10. Replies
    36
    Views
    12,675

    The fact that you setting your RAM frequency to...

    The fact that you setting your RAM frequency to the JEDEC frequency of 2133Mhz and having no problems only reinforces that your RAM overclock (anything above 2133 is an overclock, no matter what the...
  11. Thread: Q code 61

    by jacks12345
    Replies
    9
    Views
    12,708

    In my opinion (yes, I know I've had several...

    In my opinion (yes, I know I've had several lately), this is classic CPU instability. If you want to run at 4300, I would bump up the voltage to 1.23-1.24v to get into Windows. If you get into...
  12. Replies
    36
    Views
    12,675

    The typical recommendation is to start with...

    The typical recommendation is to start with either the base VCCSA (CPU System Agent Voltage) or start at 1.0v and start upping it by .01v until your RAM is recognized, then stable (if possible)....
  13. Replies
    36
    Views
    12,675

    I've gotten the 55 Q-code a few different times....

    I've gotten the 55 Q-code a few different times. If it's not bent pins, it is almost always the CPU's IMC. It's not an "issue" with the IMC so much is that it's not capable to run all your RAM sticks...
  14. Thread: Mouse lag?

    by jacks12345
    Replies
    23
    Views
    22,640

    I hate to keep complaining about this board (I'm...

    I hate to keep complaining about this board (I'm really trying to like it and I usually like and stick with ASUS products, but some of the issues are frustrating), but I'm having the same issue. It...
  15. Replies
    3
    Views
    1,620

    This is only my opinion, and others might have a...

    This is only my opinion, and others might have a totally different (and possibly better for you) opinions.

    1. It shouldn't matter as long as you use one of the red slots. If not the first slot, it...
  16. Stress and benchmark software I use: System...

    Stress and benchmark software I use:

    System testing:
    - AIDA64 Extreme (stress, monitoring, and benchmarking - probably the best one to isolate components)
    - ROG Realbench (v2.4 now - good...
  17. Replies
    5
    Views
    2,306

    Ya, I didn't think about that. I forgot the...

    Ya, I didn't think about that. I forgot the manual stated that this slot shares lanes/power with the M.2 (or something like that), and more broadly what you stated. Maybe it is mostly on the sound...
  18. Replies
    5
    Views
    2,306

    Just an update: I think I partially figured...

    Just an update:

    I think I partially figured out the issue, but I will test for the next few days. If I select the SPDIF option for the sound encoder, it crashes the Sound Blaster Audio Service. It...
  19. Replies
    5
    Views
    2,306

    Sorry, the third slot from the top. The PCIE_X4_1...

    Sorry, the third slot from the top. The PCIE_X4_1 slot. I would put it in the PCIE_X1_1 slot, but the second GPU covers it. But again, didn't have any problems until the BIOS update. Since VCCSA also...
  20. Replies
    5
    Views
    2,306

    BIOS 0802 Killed My Dedicated Audio

    So, as the title says, as soon as I updated my BIOS to 0802, my Creative Sound Blaster Zx starts to have problems. I have had no problems with it on any previous BIOS versions. Now, the service stops...
  21. Replies
    57
    Views
    21,976

    If your CPU and RAM are running at stock speeds,...

    If your CPU and RAM are running at stock speeds, with the voltages on auto, then yes, more than likely there is something wrong. If the BIOS is trying to OC your CPU or RAM, then you may need to make...
  22. Replies
    57
    Views
    21,976

    Have you tried raising the VCCSA? The "55" error...

    Have you tried raising the VCCSA? The "55" error just happened to me as well a few days ago, so I had to raise my VCCSA, which is now at 1.28v. G.Skill recommends up to 1.3v for 3000+. Everytime I...
  23. Replies
    57
    Views
    21,976

    This is my fourth ASUS board, and even though I...

    This is my fourth ASUS board, and even though I had a Maximus V Extreme for my last one, in which the BIOS is similar, I had to go about the settings somewhat differently with the R5E.

    This is...
  24. Replies
    57
    Views
    21,976

    What settings are you using in the BIOS? I had...

    What settings are you using in the BIOS? I had several issues with my system, including yours (though only a few shutdowns), until I realized I had to go about changing the BIOS settings a certain...
  25. Replies
    206
    Views
    92,356

    5960X / 4400MHz / 1.34v / Water Daily use:...

    5960X / 4400MHz / 1.34v / Water

    Daily use:
    5960X / 4250MHz / 1.3v / Water

    Costa Rica plant must still be open, because my chip is from there. My overclock seems below average like some of the...
Results 51 to 75 of 91
Page 3 of 4 1 2 3 4