Search:

Type: Posts; User: VladRadu

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    718

    Did anyone tried to replace all the ROG Gaming...

    Did anyone tried to replace all the ROG Gaming Center with Armoury crate from G703GX?
  2. Replies
    44
    Views
    4,338

    I am sustaining 3.7 on cpu with 65w pl1 on xtu...

    I am sustaining 3.7 on cpu with 65w pl1 on xtu and the temps are 80-90 and gpu temp around 75 80 thermal grizzly and 0.5 and 1mm pads
  3. Replies
    44
    Views
    4,338

    I just did my GL703GS which has different...

    I just did my GL703GS which has different internals. just remove all the screws that are holding the heat pipes and the move it left and right untill you breake the seal made by the paste then you...
  4. Replies
    44
    Views
    4,338

    I did not had the chance tu upload any results...

    I did not had the chance tu upload any results but cinebench scores around 1250cb and while stressing with aida64 both cpu and gpu it still thermal throttles but cpu clock is now 3.77 instead of 3.5...
  5. Replies
    44
    Views
    4,338

    No. At least in my unit i tried 0.5 there before...

    No. At least in my unit i tried 0.5 there before i put paste just to see how it fits and i could see a gap there
  6. Replies
    44
    Views
    4,338

    Thats what i used.

    Thats what i used.
  7. Replies
    44
    Views
    4,338

    I replaced the 1mm pads which were lifting the...

    I replaced the 1mm pads which were lifting the heat pipes with 0.5 mm
    i had to keep one 1mm strip for the chips next to the tiny chips close to the exhausts because there is more clearance so the...
  8. Replies
    44
    Views
    4,338

    Dose it power throttle when you stress the system...

    Dose it power throttle when you stress the system ?
  9. Replies
    44
    Views
    4,338

    It does initially throttle untill the fans are...

    It does initially throttle untill the fans are catching up and then after about 5 mins i get some thermal throttling shown on intel xtu graph. and the cpu frequency goes to 3.4 AIDA64 dosent show any...
  10. Replies
    44
    Views
    4,338

    i haven't pushed at all so this means that the...

    i haven't pushed at all so this means that the heatskink may be lifted a little on the cpu and gpu because of the pads so i will try 0.5mm pads instead of 1 and see how it works. Temps are better...
  11. Replies
    44
    Views
    4,338

    It used to power throrttling before and now is...

    It used to power throrttling before and now is not doing it at all but it does thermal throttling on heavy loads like aida64 system stability test and i had a few thermal throttling spikes while...
  12. Replies
    44
    Views
    4,338

    K5 pro conductivity is 5.3 while arctic 1mm...

    K5 pro conductivity is 5.3 while arctic 1mm thermal pad is 6 and when replacing the paste the pads are much easier to replace than that jelly paste. At least this is my opinion. While gaming my...
  13. Replies
    44
    Views
    4,338

    I did exactly the same tingh as you with thermal...

    I did exactly the same tingh as you with thermal grizzly kryonaut and arctic 1mm thermal pads cut in strips and it seemes that the temps are higher and i do get some thermal throttling when i stress...
Results 1 to 13 of 13