Search:

go to bios and select one as your boot drive

Good luck with that. I gave up trying that path voltage kept changing and couldn'tlock in a baseline. I went back to manual mode.

Woohoo got 5.1

Yes your are correct I just discoverd that if you disable SVID support you no longer have adaptive voltage as an option. I'm experimenting with adaptive voltage and still need to understand the new...

My Maximus XI doesn't have adaptive mode, so I would like to use offset mode to lower the core voltage at idle. Now my system is stable with 1.3V, so if I understand this correctly, in order to lower...

Yes not dellided. Those stats for delid chips require a lot of voltage for the relative overclocks, for instance why is 5Ghz 1.4 V, it should show lower than non-delid. I probably delid eventually...

I wanted test 5.1 today and see where I got to. Well didn't get there. Could not run Cinebench completely.

Using 1.38 Volts and LLC 6. I'm not sure pushing voltage any higher could achieve much...

So what clock can you achieve stable?
What is your default ram speed on XMP by the way?

Looks good to me, I'd be happy with that!

I have the same contradiction between AIO instruction and Motherboard, the only difference will be if you connect to AIO header you can't control pump speed, it will always run at full speed. Pump...

Just follow some of the tutorials on youtube, here's a couple that got me started, they are very easy to follow.

https://www.youtube.com/watch?v=CoUtA7DKXhU
...

Agree totally, I could go crazy trying all the various bench tests.

The last stress I ran was Aida64 with CPU, FPU, Cache and System memory. It BSOD'd after 30 minutes. Try running Aida64 and see what happens but you need to run it for an hour minimum. I hit 95C on...

Does anyone have a suggestion on how to install or have system recognise these two devices

PCI Device and SM Bus Controller.

I have installed all relevant software from Asus, tried windows...

Thanks, I think I'll keep it as is as you say it will be more than enough for what I'm doing, cheers.

Having just built a new PC 8700k, 16gb Ram and evo 970 M.2 drive, I am using the onboard video card, the reason being that I don't play games but use the PC as a general productivity tool.

I use...

I7 8700K, G-Skill 16Gb 3200Mhz
77788

Couldn't agree more, a test is just that a test and getting temps up to the 90's is pushing it I understand but that's the only way to see how the chip is performing. I do appreciate that something...

Yeah thanks, good points.

I'm running 5.0ghz I'd like to ask how to evaluate core temps with the various tests? When using intel burn test my temps arehigh 80's deg C with some cores hitting 91C. When running OCCT its sits on...

I have just tested this on my pc and it works. The user interface is not accurate but once you set the r255, g255, b255 and apply it will make the correct change to the motherboard, ram and fans....

An update,

I have reinstalled Windows because I couldn't get a clean uninstall of Asus software. I also went into bios and changed c state options that were set to auto to enabled. I'm not...

I'll have to check that I haven't made any changes in bios except fan curves. I might remove ai suite and see if that affects a change.

Not really my experience at least not hovering at 3.5Ghz. Unless this is how the 8700k behaves.

Arne, I have balanced