Search:

Type: Posts; User: fjsarmiento

Search: Search took 0.00 seconds.

  1. I was just surprised Asus advised to go above...

    I was just surprised Asus advised to go above spec and Corsair basically said to ignore Prime95 errors and run the ram at those speeds.
  2. Interesting response from Corsair: "Thank you...

    Interesting response from Corsair:

    "Thank you for the update. Errors in Prime95 don't necessarily mean that the kit is faulty and won't run at that speed. If you're experiencing issues elsewhere,...
  3. I got a reply from Asus: "Thank you for your...

    I got a reply from Asus:

    "Thank you for your response to ASUS Product Support. This is Neil S. and I am returning your response for a supervisor contact. I'll be more than happy to assist you.
    ...
  4. That's the thing though. The mobo is rated to...

    That's the thing though. The mobo is rated to support up to 3200 ram. I don't understand why this is happening. I did a Google search and a number of ppl had issues with going over 2800mhz on their...
  5. So you're saying my cpu is faulty? I should...

    So you're saying my cpu is faulty? I should exchange that? But didn't I void that possibility by overclocking?

    I've been doing a lot of reading and apparently the vrm on this mobo isnt great....
  6. I went back to Canada Computers and exchanged my...

    I went back to Canada Computers and exchanged my ram. Corsair advised I do this and I figured it was worth a shot even though I don't think it was the dimms.

    I'm going to run everything (cpu,...
  7. I was using 1.15v when I set it manually trying...

    I was using 1.15v when I set it manually trying to run 3200MHz with ram voltage 1.36v. I think I ended up using 1.1625v soc when I tried increasing to 1.365v ram. When I set it to auto, it was...
  8. So I ran Prime95 again for peace of mind and got...

    So I ran Prime95 again for peace of mind and got errors in a couple threads after 20-30mins. I tried increasing ram voltage some more to 1.365v which was running fine for several hours prime95 but...
  9. Was still running stable when I got home, woohoo!...

    Was still running stable when I got home, woohoo! Was very happy to see that. Just out of curiosity, I decided to see what would happen if I set SOC back to auto. When I did that, HWiNFO64 showed...
  10. Ran RealBench for 4 hours with no errors. I...

    Ran RealBench for 4 hours with no errors. I decided to try one last thing this morning. I went back into my bios and enabled D.O.C.P. standard again but this time used the same SOC (1.15625v) and...
  11. Got bsod with 1.15v SOC and 1.355v RAM. Now...

    Got bsod with 1.15v SOC and 1.355v RAM.

    Now at 1.15625v SOC and 1.36v RAM and Prime95 Blend at 1.5hrs with no errors. Looking good.

    Just downloaded RealBench, I'll give it a try. Should I...
  12. Deleted a couple posts earlier as I'm back to...

    Deleted a couple posts earlier as I'm back to testing. Bringing down the SOC back to auto or too low led to crashes. I'm trying to avoid going up to 1.2v and raising the ram voltage.

    Currently...
  13. I found this, is this your ram? Use these...

    I found this, is this your ram? Use these timings:...
  14. In my ram timings I matched the values with what...

    In my ram timings I matched the values with what is rated for my ram. Yes, just the first 5 values. My ram shows 16-18-18-36. There's a third 18 field in the bios so I put 18 in there too. ...
  15. I came home and Prime95 was still running with no...

    I came home and Prime95 was still running with no errors. I'm going to try to bring my ram voltage back down to 1.35v (set manually) and bring my SOC down to 1.15v. Keeping my multiplier to 40.5...
  16. I won't get home till later tonight but I'll...

    I won't get home till later tonight but I'll reply back with my results. I'm hoping manually setting my values will be better than using DOCP. I'm also hoping that my increased SOC voltage will...
  17. Thanks again for your reply, Arne! I changed to...

    Thanks again for your reply, Arne! I changed to manual 3200MHz and set my timings to the rated 16-18-18-36 at 1.36v. I have also increased my SOC to 1.1925v and started Prime95. I won't get to see...
  18. Oh wow, thanks for that! I'm really liking this...

    Oh wow, thanks for that! I'm really liking this HWiNFO64 and I am no longer seeing those crazy spikes in clocks and voltages.

    What about my ram? I can only run it stable at 2800MHz but it as well...
  19. Overclock AMD Ryzen 5 2600 + Asus ROG Strix B450-F Gaming + Corsair Vengeance LPX

    AMD Ryzen 5 2600 (Base 3.4GHz, Boost 3.9GHz)
    Asus ROG Strix B450-F Gaming
    Corsair Vengeance LPX 2x16GB 3200MHz CMK32GX4M2L3200C16
    EVGA GTX 1070 Ti FTW2
    EVGA CLC 240 AIO
    EVGA DG-76 Case
    EVGA...
Results 1 to 19 of 21