Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds; generated 51 minute(s) ago.

  1. I haven't got around to this yet...too busy...but...

    I haven't got around to this yet...too busy...but you might look into VF offset curve.....looks like that might be the way to do it...?
  2. Crosshair VIII is a good board...the revision...

    Crosshair VIII is a good board...the revision coming for 5xxx series CPUs looks to be a very nice board,,,finally ASUS putting in the effort on AMD
  3. Nice one....they are workhorse GPUs when nothing...

    Nice one....they are workhorse GPUs when nothing fancy is needed :)
  4. No...i'm just suggesting a range of voltages to...

    No...i'm just suggesting a range of voltages to try...manual
  5. Connect the pump header to AIO header... ...

    Connect the pump header to AIO header...

    Connect fans to CPU header...or set CPU header to ignore monitoring if you are powering fans by some other means
  6. Replies
    344
    Views
    48,581

    One is WIFI version...one isn't....?

    One is WIFI version...one isn't....?
  7. Replies
    2
    Views
    76

    Yes....40 is wake from S4 sleep...BSOD from this...

    Yes....40 is wake from S4 sleep...BSOD from this might be unstable RAM

    Either way Windows might have re-activated fast startup in windows power menus
  8. While there are, indeed, plenty of things to play...

    While there are, indeed, plenty of things to play with in the BIOS....it can be quite simple to get a basic feel for the CPU

    If I were you I would set 1.36V and 47 multi...and then simply up the...
  9. I would try voltage tweaks first and then if that...

    I would try voltage tweaks first and then if that doesn't work...try relaxing timings

    You can also max current capability for RAM in Digi+ section
  10. Try setting system agent voltage higher...try a...

    Try setting system agent voltage higher...try a range....1.1v to 1.15...to 1.2v...set DRAM to 1.375 or 1.4
  11. You need a BIOS with AGESA 1.0.8.0 to boot with...

    You need a BIOS with AGESA 1.0.8.0 to boot with Zen 3/5000 series...so 2204 2206 on CHVIII....then update to AGESA 1.1.0.0 once those BIOS drop

    BIOS Flashback is the perfect tool for this on ASUS...
  12. I doubt this is helping ...

    I doubt this is helping

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

    but you might get lucky

    As for 5.0...there are plenty of...
  13. Maybe try to reflash the latest BIOS for the...

    Maybe try to reflash the latest BIOS for the board.... BIOS flashback method....
  14. I would start there, yes. Try changing DRAM...

    I would start there, yes. Try changing DRAM voltage to 1.35v and maybe 1.4 or 1.45..this is totally safe voltage for RAM

    Maybe look in BIOS at the system agent voltage setting...see what the board...
  15. This can of course be driver...

    This can of course be driver problems...especially if it's common to only one or two games...

    assuming it's not that the most common cause of such symptoms is RAM.

    I know it's an investment (I...
  16. Yes, this is backwards compatible with PCIe...

    Yes, this is backwards compatible with PCIe 3.0...just limited, of course, to 3.0 speeds.

    :)
  17. Replies
    7
    Views
    191

    OCing these GPUs can draw well over 350W...

    OCing these GPUs can draw well over 350W alone...with an OCd CPU and important headroom...you want to get a PSU that will be in the sweet spot of power delivery...not near its maximum. A good quality...
  18. Replies
    8
    Views
    243

    That board has a second BIOS chip...maybe flash...

    That board has a second BIOS chip...maybe flash current BIOS to it and see if the behaviour continues.

    I would avoid ebay for BIOS chips...many bad/non working
    ...
  19. The Zenith II Extreme is not the Zenith II...

    The Zenith II Extreme is not the Zenith II Extreme ALPHA

    The ZIIE still does not fully support the 3990X...i.e. RAM still only runs stock
  20. Hmm...I have to say that is a pretty bad...

    Hmm...I have to say that is a pretty bad result...

    I wonder what happens if you test one RAM module at a time? swingle stick at a time....I mean, not that there's one dodgy stick or something....
  21. Hi there...what voltage have you tried? 1.45...

    Hi there...what voltage have you tried?

    1.45 DRAM 1.3 SA and IO? Some of these CPUs are plain bad to get higher than 3600 on...

    The last part you answered your own question I think LOL
  22. Replies
    7
    Views
    250

    Yes...disabling MCE will make a difference. RE...

    Yes...disabling MCE will make a difference.

    RE the fans...there are fans and there are fans....lots of fans spin and move little air. Especially if they are pushing against too little exhaust.
    ...
  23. Replies
    7
    Views
    250

    Depends a bit on GPU and case airflow. If you...

    Depends a bit on GPU and case airflow. If you have little airflow through the case...the GPU will chuck out a lot of heat and that will help saturate the AIO on the CPU.

    That said those temps are...
  24. Replies
    3
    Views
    114

    That is normal...it shows OC when you OC :)

    That is normal...it shows OC when you OC :)
  25. Replies
    1
    Views
    139

    No, it wont..that is a x8 slot x16 x8 x16 x8

    No, it wont..that is a x8 slot

    x16
    x8
    x16
    x8
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4