Search:

Type: Posts; User: Braegnok

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. 4x8GB 4266 on M12E all timings in Auto,.. is...

    4x8GB 4266 on M12E all timings in Auto,.. is stable but would need tuned as training is vary loose in Auto.

    88896

    4x8GB 4400 on M12E all timings in Auto is also stable,.. seems to train better...
  2. I ran G.SKILL 4x8 4000C15 kit in Z390 M11E board,...

    I ran G.SKILL 4x8 4000C15 kit in Z390 M11E board, used XMP 1 profile and never had any issues.

    Running the same kit in Z490 M12E board now, no issues with XMP 1 profile. Only thing I adjust is...
  3. Hello Morph, Most likely your memory is not...

    Hello Morph,

    Most likely your memory is not the issue, as it's stable and working fine at 3733.

    Which microcode does BIOS 2201 have, are you running 0x34, 0x3c, 0x39,..

    I'm thinking...
  4. Replies
    624
    Views
    110,122

    My DIMM temperature with full slots always ran at...

    My DIMM temperature with full slots always ran at mid 40s, and mid 50s under load/testing before actively cooling.

    Idle temps.
    88616

    6-Hour Karhu.
    88654
  5. Replies
    624
    Views
    110,122

    I finally installed the Quantum Vector FE block,...

    I finally installed the Quantum Vector FE block, and also added in Monarch X4 on the memory.

    Running 4x8GB kit with the Monarch blocks, so far memory does not go above 40c, regardless of ambient...
  6. Replies
    624
    Views
    110,122

    I'm just now starting to put in some memory...

    I'm just now starting to put in some memory profiles, the 2102 BIOS memory training is working vary well on M12E board.

    I have loaded 2x16GB 3600 CL14, 4000 CL15, 4400 CL16 so far and all I put...
  7. Replies
    624
    Views
    110,122

    I flashed over 0098 with the new 4/7/2021 version...

    I flashed over 0098 with the new 4/7/2021 version 2102, and after system updated LED, OLED, and ME everything is good to go.

    Q-FAN is working, all my fan curves are set, sweet!

    88319
  8. Replies
    624
    Views
    110,122

    Thanks geneo. I will download tonight, that's...

    Thanks geneo. I will download tonight, that's sweet Shamino fixed the QFan issues.

    I rolled back to 0098, 0804 while waiting for the fix and both are working great, tuff deciding which one to...
  9. There are a lot of changes with Z590 vs Z490...

    There are a lot of changes with Z590 vs Z490 platform. I guess XMP on Z590 system will use Gear 1 mode for 3600 mhz, and up to 3733 mhz. Seems like Gear 1 does require an increase in both VCCIO and...
  10. Replies
    624
    Views
    110,122

    I have a three day weekend this week so might...

    I have a three day weekend this week so might just take a look at AI Suite and load some fan curves, so I can finish testing. The memory training seemed to work vary well with 2101, would like to see...
  11. Replies
    624
    Views
    110,122

    +1 cleared cmos, reset, and reflash to no avail....

    +1 cleared cmos, reset, and reflash to no avail.

    All fans in Q-FAN Control are flatlined, optimize does not work, or clicking on any mode does nothing, no fan adjustments work.

    CPU FAN
    88207
    ...
  12. Replies
    624
    Views
    110,122

    I just went back to BIOS #1 which has 2002...

    I just went back to BIOS #1 which has 2002 loaded.

    Still have 2101 on BIOS #2,.. so guess I will reload later and try AISuite for running system fans. other than my fans not working everything...
  13. Replies
    624
    Views
    110,122

    +1 testing 2101 on M12E, so far everything seems...

    +1 testing 2101 on M12E, so far everything seems solid.

    88201

    Correction! Q FAN is not working, system overheating. All my fans are flat lined, can not optimize fans, or adjust them in BIOS. If...
  14. Replies
    624
    Views
    110,122

    Nvidia released VBIOS update tool today for FE...

    Nvidia released VBIOS update tool today for FE cards, so ReSizable BAR is working with BIOS 2004.

    88188
  15. Replies
    7
    Views
    456

    Over the years I have used these guys twice for...

    Over the years I have used these guys twice for CPU Socket replacement, https://ps3specialist.com/computer-motherboard-damaged-cpu-socket-replacement-service/

    I just checked site and they still do...
  16. Replies
    8
    Views
    518

    I agree totally wrong, looks like you and...

    I agree totally wrong, looks like you and Daxterbeer are correct. My bad.

    Thanks, glad you cleared that up, found this image on Asus ROG NVLINK spacing, which matches what you guys are saying.
    ...
  17. Replies
    8
    Views
    518

    OK,.. 80mm is still 80mm regardless of how you...

    OK,.. 80mm is still 80mm regardless of how you eyeball it.
    88081
  18. Replies
    8
    Views
    518

    Hello, the Z590 Extreme boards will be releasing...

    Hello, the Z590 Extreme boards will be releasing soon, as will the Apex.

    A few things however you need to consider before buying, if your planning on running RTX 3090 NVLINK.

    Currently the only...
  19. Replies
    624
    Views
    110,122

    +1 I see no differance, loading exact same...

    +1
    I see no differance, loading exact same profiles.
  20. Generally in XMP mode or Manual mode just putting...

    Generally in XMP mode or Manual mode just putting in frequency, and primary numbers your Read/Write/Copy will all be different and Copy will be lowest of the three. You can adjust/tune Primary,...
  21. Replies
    624
    Views
    110,122

    Post #286 on this thread,...

    Post #286 on this thread, https://www.overclock.net/threads/overclocking-11700k-11900k-results-bins-and-discussion.1777365/page-15

    2009 Hero XII direct link.
    ...
  22. Try this link,...

    Try this link, https://rog.asus.com/motherboards/rog-maximus/rog-maximus-x-hero-wi-fi-ac-model/
  23. Replies
    624
    Views
    110,122

    Thanks for the link geneo,

    Thanks for the link geneo,
  24. Replies
    624
    Views
    110,122

    Thanks geneo, So BIOS 2004 is using E2 which...

    Thanks geneo,

    So BIOS 2004 is using E2 which explains why I need to bump up voltage a bit. You have tried CA, EO and CA seems to be the best option,.. I will try CA mod on 2004, see if that...
  25. Replies
    1
    Views
    289

    Looks fine, I use Afterburner 4.6.3,.....

    Looks fine, I use Afterburner 4.6.3,.. https://www.msi.com/Landing/afterburner

    Afterburner is nice to show graphics card operating status, adjust core clock, memory clock, and set-up a fan curve....
Results 1 to 25 of 173
Page 1 of 7 1 2 3 4