Search:

Type: Posts; User: NovaStorm

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    148

    Oh I should also mention when I left that blue...

    Oh I should also mention when I left that blue screen I enabled boot logging which worked at booting into windows.
  2. Replies
    4
    Views
    148

    You might be onto something with that. I have now...

    You might be onto something with that. I have now made it into the bios settings and windows. I disconnected all usb devices except keyboard and mouse. I killed all power to the system and moved the...
  3. Replies
    4
    Views
    148

    Still trying to get this working. I renamed the...

    Still trying to get this working. I renamed the latest bios file to R4E on a usb drive put it in the flashback port and did the update. Now it stops at the (first pic) screen with bios rev. 4901...
  4. Replies
    4
    Views
    148

    R4E not booting after Bios update

    I had installed windows 10 onto my system and it was not updating properly so I decided to update the bios. I used the converter to do the update as in the third pic (sorry pics in wrong order) with...
  5. Replies
    9
    Views
    5,726

    Here is the one I've ordered through NCIX Canada....

    Here is the one I've ordered through NCIX Canada. They also have a US site or search for the best price for where you are....
  6. Replies
    5
    Views
    3,067

    Cheers Zka17 duly noted :) Actually temps look...

    Cheers Zka17 duly noted :)
    Actually temps look very good for hitting a 4.8 would be nice to see if he can hold them there and get it stable.
    Rgds ~
  7. Replies
    20
    Views
    16,652

    Hi, I've got the Hans G 28" monitor and you have...

    Hi, I've got the Hans G 28" monitor and you have to use DVI cable or DVI to HDMI if you want to be able to see your bios screen appear before window loads. Assuming you have windows installed...
  8. Replies
    5
    Views
    3,067

    If you get Realtemp GT it will show you all...

    If you get Realtemp GT it will show you all 6cores ;)
    You should show all your specs if you want any suggestions from folks.
    4.8 should be doable, but you will want active cooling on your VRM's
  9. Replies
    14
    Views
    7,046

    Actually I had a heck of a time getting my H100...

    Actually I had a heck of a time getting my H100 installed, so I know exactly what you mean. Took me a good 45 min to finally get it on and screwed down. I could get the mount over three pilars and...
  10. Replies
    13
    Views
    5,608

    Just to update the 1.33Vcore is working great :)...

    Just to update the 1.33Vcore is working great :) BF3 last night @ 1920x1200, lots of ultra settings great frames 100+ -,
    Maximun temps across all cores was 61c. This is very satisfying...
  11. Replies
    13
    Views
    5,608

    Will give the lower Vcore a go Axtenar. I am...

    Will give the lower Vcore a go Axtenar. I am guessing that as long as it is stable the lower the better eh.
    Thanks again for all the help you have provided. Made working it out that much easier....
  12. Replies
    13
    Views
    5,608

    OK now my question is this. For everyday use am I...

    OK now my question is this. For everyday use am I better off running (per core) for things like cruzing the net, office, photoshop ect.
    Then when I want to do video or gaming simply switching over...
  13. Replies
    13
    Views
    5,608

    Ok, did some tweaking as per your instructions....

    Ok, did some tweaking as per your instructions. Dropped vcore to 1.36 ran 3Dmark11 and took temps. Dropped again to 1.35v and ran bench again and took temps. All went fine and tempurature values did...
  14. Replies
    13
    Views
    5,608

    Cheers Axtenar, thanks for the advice. I will...

    Cheers Axtenar, thanks for the advice. I will certainly give it a go later. Just finishing cleaning up my old machine for a friend :)
    I was wondering if I could lower that a bit. Rgds ~
  15. Replies
    13
    Views
    5,608

    Yes I tried the 4.8 works great (such a nice...

    Yes I tried the 4.8 works great (such a nice board and cpu) figured the heat was a little to high for my set up though.
    I can add a 200mm fan off the side case door which will point directly at the...
  16. Replies
    13
    Views
    5,608

    I was hoping I would get enough air movement...

    I was hoping I would get enough air movement around the VRM's from air exhausting up the side of the board from 2, 200mm top mounted fans. I set up the rad out away from the board as far as I could...
  17. Replies
    13
    Views
    5,608

    Does this look resonable for an everyday OC

    Here are the settings I came up with after reading and trying different things from this forum. I am looking for a good everyday OC on my 3930K/RIVE/Dominator GT xmp 2133 and H100 cooler. I have...
  18. Replies
    5
    Views
    2,836

    I am running Nvidia GTX's but when I booted the...

    I am running Nvidia GTX's but when I booted the first time the first thing I did was update bois from 12__ to 1305. I have had no problems with the board or hardware. So updating should only give...
  19. Replies
    1
    Views
    1,827

    More or less all together. Installed 7 and ran...

    More or less all together. Installed 7 and ran the expericence. CPU stock @ 3.2
    It's a good start! CPU running 24 deg C idle...
    :cool:
    ...
  20. Replies
    1
    Views
    1,827

    Coming along with new build

    Waiting on my 3930K which should arrive today. Managed to get the H100 installed with a hair clearance on the ram.
    I've plugged in all MB power connectors, 24, 8, and 4 since my Hal 90 psu has...
  21. Replies
    8
    Views
    3,111

    Thanks for chipping in. I've plugged them all in....

    Thanks for chipping in. I've plugged them all in. The 8, 4, and 24.
    If I've got em might as well use em. Can't hurt !

    This board is a work of art. Having fun fitting the H100 into my NZXT...
  22. Replies
    8
    Views
    3,111

    Bump ~~~ Anyone

    Bump ~~~ Anyone
  23. Replies
    8
    Views
    3,111

    Hi, not trying to steel your thread, but it is...

    Hi, not trying to steel your thread, but it is along the same lines as the original poster...

    Just installing the R4E with a NZXT Hale 90_850watt PSU,...
Results 1 to 23 of 23