Search:

Type: Posts; User: xeromist

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. You can try setting the hard drive not to turn...

    You can try setting the hard drive not to turn off (0 minutes). This has helped me.
    88660
  2. I mainly suggested that because in many regions...

    I mainly suggested that because in many regions there is limited time to make an exchange with the retailer, which is generally easier than RMA with the manufacturer. You still might want to contact...
  3. You might check if switching the monitors...

    You might check if switching the monitors connections makes a difference. Is it the one connected as the 3rd or is it this specific monitor?
  4. Booting to Windows doesn't mean stable and you...

    Booting to Windows doesn't mean stable and you might even get some stuff to run but have weird unexplained problems in the future. I'm telling you how to be sure but it's up to you. I always test...
  5. That's not the case. When you look at older...

    That's not the case. When you look at older switches they had a dedicated uplink port for that reason. Newer switches auto-negotiate so you can use any port and it doesn't matter if you use standard...
  6. Replies
    3
    Views
    72

    Does the brightness level have any impact? If so...

    Does the brightness level have any impact? If so then it could be the backlight driver circuit.
  7. After setting your RAM you should run HCI...

    After setting your RAM you should run HCI Memtest. Even if you can boot to Windows it may not be stable. If it's not stable you might need to try a different docp profile or manually tune your memory...
  8. I'm not actually sure how the license works. I...

    I'm not actually sure how the license works. I know I read something but it may have only applied to certain hardware that was "Ready" and just needed a license key. Sorry, wish I knew more.
    ...
  9. Does the audio control panel show DD or DTS? They...

    Does the audio control panel show DD or DTS? They are licensed technologies so not all motherboards have them as it would increase the price. If it didn't come with your board I believe you may be...
  10. This is a very old thread. If there was a line of...

    This is a very old thread. If there was a line of SSDs causing damage they will no longer be made by now so you have nothing to worry about.
  11. None of the above is necessary anymore. Microsoft...

    None of the above is necessary anymore. Microsoft fingerprints the hardware of Windows 10 machines for licensing. Just follow Microsoft's instructions on creating a Win 10 Home installation drive...
  12. Those aren't Thunderbolt ports, just USB-C. So...

    Those aren't Thunderbolt ports, just USB-C. So you would need USB-C DP adapters. I'm not sure without further research whether there is a USB-C HDMI adapter that would work with the native DP output...
  13. I'd try a complete shutdown once it is warmed up...

    I'd try a complete shutdown once it is warmed up and then immediately start it back up. If that works correctly like a restart does then that might point to something temperature related. Another...
  14. I just thought of something. Does your tester...

    I just thought of something. Does your tester tell you if the connection is standard or crossover? I believe most modern network devices don't really care and can negotiate either but maybe the...
  15. You might need a specific driver from Lenovo....

    You might need a specific driver from Lenovo. Check their website.
  16. It was missing. I added it for you.

    It was missing. I added it for you.
  17. If the fans are off then it would get hot even if...

    If the fans are off then it would get hot even if there's very little heat generation.
  18. You could check to see if you are in a silent or...

    You could check to see if you are in a silent or performance mode either in Windows or through ASUS tools. It could be trying to keep the fans silent which would allow temps to rise.
  19. You might consider exchanging at the shop if you...

    You might consider exchanging at the shop if you think this unit is faulty. If it's just interference to which the Keris is particularly susceptible there may not be anything you can do....
  20. You might want to try different patch cables in...

    You might want to try different patch cables in the closet and from the wall to the computer as well. Even if they work with another device there could be weird issues like the RJ45 is slightly out...
  21. Hi Bimmer, Please make sure to read your...

    Hi Bimmer,

    Please make sure to read your private messages. You may not post in another user's thread in this section per the sticky:...
  22. Thread: What RAM?

    by xeromist
    Replies
    3
    Views
    125

    If you don't get a direct answer you can browse...

    If you don't get a direct answer you can browse the AMD 500 series forum and look at the PC specs of some of the folks there:
    https://rog.asus.com/forum/forumdisplay.php?292
  23. The only thing you can do is try to move the...

    The only thing you can do is try to move the receivers closer to the devices. Some wireless devices I own actually come with a USB extension so the receiver can be located closer to where the device...
  24. I'm not sure if your model has Optimus. If it...

    I'm not sure if your model has Optimus. If it does then the discrete GPU will power down when not needed. If it does not have Optimus then the discrete GPU is the only GPU and will run all the time,...
  25. Replies
    4
    Views
    184

    Have you contacted support? Maybe they have heard...

    Have you contacted support? Maybe they have heard of this.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4