Search:

Hello,

Have you the enclosed rubber pads that ship with the motherboard meant for single sided M.2 devices?

Checked my PM but can't seem to find anything from you. I'll contact you this morning.

Hello,

8 years is definitely a large upgrade gap :D

What is it exactly you're looking to do? Most of the default petametres won't ever need changing.

If it's overclocking, I'd recommend...

Hello,

You can use CPU_FAN header how you like, however CPU_OPT is slaved to it meaning it cannot be controlled independently from CPU_FAN.

Hello,

No official information is available yet, will have to stick to the media outlets for the time being.

Hello,

Per core OC is the way to go on 12th gen. You can check out the predictions in the AI Tweaker menu.

Hello,


Remove all overclocking including XMP and PBO and retest.

Remove the CPU, reseat and check for even mounting pressure.

Hello,

The white pixelated lines and screen artefacts point towards a GPU issue.

First and foremost you need to make sure there is no overclock whatsoever.

This means Optimised Defaults. No...

Most difficulty this generation comes from users mixing/combining memory kits. 5600CL36 2x16 should be fine. You can post back if you're experiencing trouble stabilising the overclock.

It's a case of different applications fighting for control. Might be worth checking in with Corsair.

...

Hello, the 8-pin ESP is required in order to use the motherboard.

For your CPU you will not need the additional 4-pin ESP connector as the CPU is not capable of drawing enough current.

ROG Strix LC RTX 3090Ti OC Edition Overclocking Overview

To say NVIDIA's Ampere was born amid strange times is an understatement. With a global pandemic, various component shortages amongst huge...

Use the Chassis fan headers. You can then use QFAN from within the UEFI to control the temp source and fan curve.

Hello,

I use HWInfo stats panel and GPUTweak3, personally.

You might want to check out the overview video on AI Overclocking.


https://www.youtube.com/watch?v=YI5yoK1hgQ4

More isn't always better so be sure to test methodically, that's where some people tend to trip up.


Try both Tweak Mode 1 and 2 with the following and select 2T.

These are the more...

Hello,


Got Extreme Tweaker > CPU System Agent Voltage

Test between 1.05v - 1.25v

Go to Extreme Tweaker > Advanced memory settings

Test Memory Controller Voltage to between 1.25 -...

Being a KF makes troubleshooting a little more difficult. I’d be inclined to try an alternative GPU. Might be best to let a system integrator take a look for you if you’ve exhausted everything.

Two motherboards resulting in 00 sounds pretty conclusive to me. Trying the cpu in another motherboard may lead to further issues.

Way beyond platform limits in that density. The simplest way of showing this is if you look at what kits are available on the market in 128gb capacity. Memory kits are binned in the density they are...

128GB at 4266MHz sounds like a typo or expectations that need to be kept in check*:eek:

Hello,

In the TVB menu you can set a frequency offset based on package temp.

Given what you're saying above, it sounds like the CPU needs to be RMA'd, yes.

Hello,

As above,

Check motherboard stand off screws aren't over-torqued

Reseat CPU whilst checking for any bent pins, then remount cooler whilst ensuring even mounting pressure

If no...

Hello,

A 8-pin EPS12V CPU connector can draw over 235W. If you're able to trip OCP on a 5950X with a single EPS12V you're going in hard :cool:

In short, it's not necessary unless going...

Hello,

As above, both the120mm Aura Sync RGB fans and 140mm fan are PWM and should be controllable. Check QFAN within the UEFI and select PWM.