Search:

UEFI 2601 contains AGESA 1.1.0.0 Patch C. Boost behaviour between AGESA builds may vary.

3600MHz should be no problem for an 11th Gen CPU on that board. As with all things overclocking related, however, plug and play compatibility may vary depending on the CPU sample, memory vendor and...

Hello, if the problem occurred after moving the system you can try reseating the CPU and cooler, making sure there is even mounting pressure.

This process is part of Microsoft's Drive Framework and might not be the route course of the issue. Visit the Intel Download Center and download the latest chipset drivers for your board...

Check out latencymon as suggested. It may point you in the right direction. https://www.techspot.com/downloads/6944-latencymon.html

Hello, Update to the latest Nvidia Game Ready drivers. You might want to try downloading and running latencymon to see if this flags any services running high DPC latency.

If the issue only occurs when pushing memory and FCLK then the overclock is not stable. Tune VSOC value manually ranging from 1v to 1.15v.

Hello,
A number of items can have an impact on the single threaded performance depending on the workload.

BIOS and AGESA revision
Memory latency
Silicon quality
Fabric Clock
BIOS CPU...

Hello,

If the issue occurs when enabling the XMP profile then the overclock is likely not stable.

Enable XMP in the UEFI and try setting the below values to see if this helps the system pass...

Assigning the slots in the UEFI to GEN 3.0 that are populated is sufficient enough, yes.

Hello,

Have you tried creating a new profile on build 2006? If you're using a saved profile from an old UEFI build it's possible it's incompatible due to changes in AGESA or other rulings....

Hello,

Use NVFlash to revert back to V2 BIOS. You can download the correct BIOS from TPU if you did not save it. https://www.techpowerup.com/vgabios/

Open an elevated command prompt as admin
...

Hello,

Memory stability should be tested with HCI MemTest or Karhu RAM Test. OCCT Memory test is also fairly good.


Go into the AMD Overclocking Menu in the UEFI, select Curve Optimiser and...

Hello,
Close afterburner or any other application with an active OSD and try again.

See guide here

The QVL and validation process is designed to ensure the user the best possible chance of compatibility, or more importantly stability. It doesn't ensure or guarantee the kit will operate at the...

thread stickied

Are you using the IGPU? If not, it can be disabled. Having it enabled whilst dormant will likely not have an adverse impact on performance, though.

Hello,

This might be down to memory rules, cache, or Sandra may need an update (to name a few reasons). I wouldn’t get too hung up on synthetic benchmarks, but you can try AIDA64s bandwidth test...

Hello,*
Please state which board. Bandwidth sharing information should all be available in the product manual.

Have you tried changing out the Display Port cable for both screens, or alternatively only running one panel to see if this helps?

I'm aware you tried with a different memory kit, but make sure...

The reported voltage will differ depending on the monitoring tool and whether VID is being reported or vcore. The VID is the voltage the CPU thinks it's receiving, Vcore is the real-time measurement....

Hello,

After updating, are you using an OC profile that was saved in the UEFI from the previous build? If so, wipe the profile and start over.

How are you testing memory stability?

Hello,

Your 10th Generation CPU has a maximum number of 16x PCIE lanes

Have you tried removing all expansion cards and NVME drives from the system and checking then?

Might want to try both reseating the CPU and GPU to ensure proper contact.