Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. UEFI 2601 contains AGESA 1.1.0.0 Patch C. Boost...

    UEFI 2601 contains AGESA 1.1.0.0 Patch C. Boost behaviour between AGESA builds may vary.
  2. 3600MHz should be no problem for an 11th Gen CPU...

    3600MHz should be no problem for an 11th Gen CPU on that board. As with all things overclocking related, however, plug and play compatibility may vary depending on the CPU sample, memory vendor and...
  3. Hello, if the problem occurred after moving the...

    Hello, if the problem occurred after moving the system you can try reseating the CPU and cooler, making sure there is even mounting pressure.
  4. Replies
    6
    Views
    157

    This process is part of Microsoft's Drive...

    This process is part of Microsoft's Drive Framework and might not be the route course of the issue. Visit the Intel Download Center and download the latest chipset drivers for your board...
  5. Replies
    6
    Views
    157

    Check out latencymon as suggested. It may point...

    Check out latencymon as suggested. It may point you in the right direction. https://www.techspot.com/downloads/6944-latencymon.html
  6. Replies
    6
    Views
    157

    Hello, Update to the latest Nvidia Game Ready...

    Hello, Update to the latest Nvidia Game Ready drivers. You might want to try downloading and running latencymon to see if this flags any services running high DPC latency.
  7. If the issue only occurs when pushing memory and...

    If the issue only occurs when pushing memory and FCLK then the overclock is not stable. Tune VSOC value manually ranging from 1v to 1.15v.
  8. Hello, A number of items can have an impact on...

    Hello,
    A number of items can have an impact on the single threaded performance depending on the workload.

    BIOS and AGESA revision
    Memory latency
    Silicon quality
    Fabric Clock
    BIOS CPU...
  9. Hello, If the issue occurs when enabling the...

    Hello,

    If the issue occurs when enabling the XMP profile then the overclock is likely not stable.

    Enable XMP in the UEFI and try setting the below values to see if this helps the system pass...
  10. Replies
    7
    Views
    304

    Assigning the slots in the UEFI to GEN 3.0 that...

    Assigning the slots in the UEFI to GEN 3.0 that are populated is sufficient enough, yes.
  11. Hello, Have you tried creating a new profile...

    Hello,

    Have you tried creating a new profile on build 2006? If you're using a saved profile from an old UEFI build it's possible it's incompatible due to changes in AGESA or other rulings....
  12. Hello, Use NVFlash to revert back to V2 BIOS....

    Hello,

    Use NVFlash to revert back to V2 BIOS. You can download the correct BIOS from TPU if you did not save it. https://www.techpowerup.com/vgabios/

    Open an elevated command prompt as admin
    ...
  13. Hello, Memory stability should be tested with...

    Hello,

    Memory stability should be tested with HCI MemTest or Karhu RAM Test. OCCT Memory test is also fairly good.


    Go into the AMD Overclocking Menu in the UEFI, select Curve Optimiser and...
  14. Replies
    1
    Views
    74

    Hello, Close afterburner or any other...

    Hello,
    Close afterburner or any other application with an active OSD and try again.
  15. Replies
    532
    Views
    143,096

    See guide here...

    See guide here
  16. Replies
    10
    Views
    252

    The QVL and validation process is designed to...

    The QVL and validation process is designed to ensure the user the best possible chance of compatibility, or more importantly stability. It doesn't ensure or guarantee the kit will operate at the...
  17. Sticky: thread stickied

    thread stickied
  18. Are you using the IGPU? If not, it can be...

    Are you using the IGPU? If not, it can be disabled. Having it enabled whilst dormant will likely not have an adverse impact on performance, though.
  19. Replies
    2
    Views
    103

    Hello, This might be down to memory rules,...

    Hello,

    This might be down to memory rules, cache, or Sandra may need an update (to name a few reasons). I wouldn’t get too hung up on synthetic benchmarks, but you can try AIDA64s bandwidth test...
  20. Hello,* Please state which board. Bandwidth...

    Hello,*
    Please state which board. Bandwidth sharing information should all be available in the product manual.
  21. Have you tried changing out the Display Port...

    Have you tried changing out the Display Port cable for both screens, or alternatively only running one panel to see if this helps?

    I'm aware you tried with a different memory kit, but make sure...
  22. The reported voltage will differ depending on the...

    The reported voltage will differ depending on the monitoring tool and whether VID is being reported or vcore. The VID is the voltage the CPU thinks it's receiving, Vcore is the real-time measurement....
  23. Hello, After updating, are you using an OC...

    Hello,

    After updating, are you using an OC profile that was saved in the UEFI from the previous build? If so, wipe the profile and start over.

    How are you testing memory stability?
  24. Replies
    21
    Views
    484

    Hello, Your 10th Generation CPU has a maximum...

    Hello,

    Your 10th Generation CPU has a maximum number of 16x PCIE lanes
  25. Replies
    21
    Views
    484

    Have you tried removing all expansion cards and...

    Have you tried removing all expansion cards and NVME drives from the system and checking then?

    Might want to try both reseating the CPU and GPU to ensure proper contact.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4