Search:

[/QUOTE]

The multiple POSTs on UEFI 2606 seem like training process POSTs, the click should be coming from PSU, components will not get damaged.

The advise for VBOOT & VDIMM they should be...

Some test data share :) .

R5 3600 Batch: BF 1922SUT
ASUS ROG Crosshair VII Hero WiFi UEFI 2606
F4-3200C14Q-32GVK

Few days ago I tested moving DIMMs around the slots, moving them around could...

In this album of screenies all I change is SOC voltage, see the ASUS TurboV Core app for value, using too low a SOC results in loss of performance for me. The UEFI in use was a modified 0068 with...

UEFI 2406 safe boot button did not work, nor could you make board enter safe mode by holding down the power button.

UEFI 0068 which was "beta" safe boot and safe mode did work, but some boards...

I'll be honest I do not use drivers from ASUS site.

I install latest ones from AMD site.

I never install drivers before BIOS update either. I update BIOS, once in OS I install latest driver.
...

Are you using latest version of HWINFO? because an older version was incorrectly identifying CPU as engineering sample.

I always set fan profile via UEFI, do not use OS SW. This ZIP has WMV of the incident with lost PWM, again rig had been in use since midday 21st. I don't know when over the course of overnight run...

It will work with Zen/Zen+.

Besides RGB or fan control SW, what monitoring SW do you use? old versions of AIDA64 can cause issues, HWMonitor I wouldn't use on Ryzen at all TBH.

[/QUOTE]

Seems that way.

From what The Stilt stated, RAM timings can only be set at post.

Latest version from a German forum where member link :o .

Version 1.05.03 beta can be found here, link. I have been using it on Zenith Extreme Alpha and Crosshair VII Hero.

I did post here...

I don't think this is a valid statement. When I read a member say the only way they could get into UEFI was by using another keyboard that to me is not user error. That is firmware issue. Plenty of...

Never really use any ASUS SW other than ASUS TurboV Core, so yeah I would concur a off by default would be great.

It would also be nice to see ASUS TurboV Core download on motherboard support page.

I have only experienced this once on UEFI 2501/2406 when PC had been in use for ~3 days back to back.

Set fan profile in UEFI, do not use OS SW to adjust fans, I would make sure you do not use...

Yeah 2501 and earlier had been good for me as well. I just like tinkering so try all of the UEFIs TBH :) .

Besides boost aspect of ComboPi-AM4 1.0.0.3AB onwards, due to the SMU FW adjustments my...

Little share of what I've noted with differing UEFIs on my setup.

I have used on my C7HWIFI UEFIs :-

2406, 0068, 2501, 2602, 2606, 2701

with R5 3600 & F4-3200C14Q-32GVK.

All reach 3800MHz...

I have used on my C7HWIFI UEFIs :-

2406, 0068, 2501, 2602, 2606, 2701

with R5 3600 & F4-3200C14Q-32GVK.

None have corrupted my OS.

All reach 3800MHz 1:1:1 MEMCLK:FCLK:UCLK.

@Zeed

:cool:

No problem :) , the C6E is nice board enjoy :D .

Linux link.



I think due to the buried nature of Global C-State Control I think people are mistaking PSS Support as that. Dunno though, all I'm seeing from things I've looked at, that PSS is a...

Moar Matisse :D ...

SMU FW in AGESA ComboPi-AM4 1.0.0.3AB/ABB is what is responsible for poorer boost than prior AGESA. Here are links to two of The Stilt's posts on this, link 1, link 2. Shamino...

[/QUOTE]

I modded CPU microcode on UEFI 0068 to newer version and used that at one point. Using later mCode with older UEFI/AGESA does not kill boost behaviour for me. So The Stilt/Shamino saying...

I think you have miscounted the 7 pin header near CPU/IC with BIOS stamped. I think it's a 9 pin, is for factory BIOS flash, link.

Dunno what the 3 pin header is.

Ahh OK.



Didn't set PCI-E, TBH never set it on any UEFI of AM4/SP3r2.

Boost stock CPU is fine for me on 1.0.0.3AB & ABB, where I note difference is PBO+xxxMHz. On a UEFI prior to 1.0.0.3AB...

I don't think this is Cool 'n Quiet.

I don't have it on 1xxx CPU, but do have Global C-State Control. I've also found AM1 mobo manuals showing PSS Support. Also found a site showing if enabled...

Yes seen the updated PB settings, not tried them yet.




Dunno. Only thing I can think of is if you're not manually setting ProODT then [Auto] has a differing default for UEFI 2406 & 2501 vs...