Search:

Type: Posts; User: edrickjk

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Are you using a riser card by any chance ?

    Are you using a riser card by any chance ?
  2. Replies
    11
    Views
    290

    Thats when they changed to me version 12.039, so...

    Thats when they changed to me version 12.039, so its highly possible its related yes. Before reverting bios on this board i would ask around here and on reddit since it seems you don't have bios...
  3. Dont know if this would apply to all z370 and...

    Dont know if this would apply to all z370 and z390 ,but my previous board x code needed 1.34v for a stable 5 ghz all core 0 avx offset. My xi extreme need 1.29 v. If it the same case for you i would...
  4. Replies
    2
    Views
    123

    Im using both m.2 slot and the third drive is on...

    Im using both m.2 slot and the third drive is on the pcie 4x slot. All these pcie lane are tie to the pch,thus leaving the 16 cpu lane open for the gpu, very little performance loss from the drive ...
  5. Replies
    11
    Views
    290

    Look couple post down about bios issue,most...

    Look couple post down about bios issue,most likely you have the same issue we all have with the newer bios version .
  6. Replies
    11
    Views
    290

    DId you update your bios during that time period?

    DId you update your bios during that time period?
  7. Replies
    22
    Views
    1,530

    Extreme user here ,was getting white hair trying...

    Extreme user here ,was getting white hair trying to find out the issue,had totaly forgot i updated the bios when it came out. Switched to bios 2 and all my problem went away thanks phatmonkey for the...
  8. Replies
    9
    Views
    419

    wonder if it would be posible to rma the block...

    wonder if it would be posible to rma the block with ekwb directly and get a replacement. Brand new one would be easy to sell then.
  9. Replies
    9
    Views
    419

    Guess you had bad gpu block from the factory...

    Guess you had bad gpu block from the factory then,it suck to have to deal with bad machining from the get go. The aio route is nice in a way that its spring loaded just like a cpu ,perfect fit each...
  10. Replies
    9
    Views
    419

    issue is some glue arround the gpu preventing...

    issue is some glue arround the gpu preventing proper contact betwen the glpu and the plate ,had the same issue.Quite a frustrating issue.
    ...
  11. Replies
    9
    Views
    419

    Nzxt do a bracket to use aio on a gpu it work...

    Nzxt do a bracket to use aio on a gpu it work great and will fit on a strix. Only negative is the look.aint the pretiest thing . G12 is the model and will work with most standard aio.
  12. 9900k here 5 all core ,0 avx offset and still...

    9900k here 5 all core ,0 avx offset and still reach 177w under heavy benchmark......at 140% they just changed the total scale not the clocking ability.I know i have a doifferent vrm,but all the asus...
  13. Unbalanced fan,i would ask for a replacement if...

    Unbalanced fan,i would ask for a replacement if still under waranty .
  14. Replies
    15
    Views
    491

    Mate no insult intended but its obvious you are...

    Mate no insult intended but its obvious you are not handy with tool, you might want to step back and ask a friend to do it for you . Extractor don't need to be hammered in,its rotation force only....
  15. Replies
    15
    Views
    491

    shield is made of aluminum and you occur more...

    shield is made of aluminum and you occur more chance to damage something cutting the heat sink then cutting to small slot with a dremel . Lay it flat on your motherboard box for ex,there no...
  16. Replies
    9
    Views
    2,083

    I think your main issue is the video card is...

    I think your main issue is the video card is chocking its own hot air and recycling it .Even if you push some air to it,the hot air have little to no place to go . Every case is different but try...
  17. Replies
    15
    Views
    491

    First , if it feel to tight or slip usually you...

    First , if it feel to tight or slip usually you have the wrong size screw driver. Second At this point the smart way would be to remove the board cover the area arround the shield and use a dremel to...
  18. Replies
    3
    Views
    440

    Cable mods one give me 0 issue with a 2080ti ,...

    Cable mods one give me 0 issue with a 2080ti , lian li and cooler master one would not work properly for me .
  19. Replies
    1
    Views
    409

    First can you send us a picture of your...

    First can you send us a picture of your setup,maybe it need some airflow improvement.Second i speak french as well so don't worry.
  20. Replies
    31
    Views
    9,041

    Was having the issue as well until i installed my...

    Was having the issue as well until i installed my water block and the ek back plate. I think the vibration is intensified with the stock back plate.

    As you can see with the picture ,the plate...
  21. You overthinking it,that game at time will crash...

    You overthinking it,that game at time will crash for no reason. There still a bug where the game will keep filling the video memory until it crash,make sure to set the limit memory option in your...
  22. Replies
    0
    Views
    253

    9900k on a maximus x code

    Been running for almost 2 month now ,board handle it with no issue and i can say i wont need to upgrade to a 390 board. Running all core at 5 ghz at 1.34 volt.

    Can be a bit toasty under avx load...
  23. Replies
    64
    Views
    7,513

    Thanks mate, was just hoping to maybe save a...

    Thanks mate, was just hoping to maybe save a couple degree overall under load and still retain the use of the 2 extra core. Just debating if i should upgrade or not from my i7 8700k.
  24. Replies
    64
    Views
    7,513

    Phillyflyer, If you don't mind can you try...

    Phillyflyer, If you don't mind can you try something. I would be curious to know the temp if we where to clock the first 6 core at 5mhz and leave the last 2 one at 3 or 4mhz.
  25. Replies
    64
    Views
    7,513

    Did you feel an improvement in some game? I don't...

    Did you feel an improvement in some game? I don't mind to delid and sand down the die if needed ,but if the gain is to minimal compared to my 8700k i might hold on until the next gen.
Results 1 to 25 of 44
Page 1 of 2 1 2