Search:

Type: Posts; User: Shazbat

Search: Search took 0.00 seconds.

  1. I have managed to get Nord to work... The problem...

    I have managed to get Nord to work... The problem i have is I cannot get the exceptions to work. It is all or nothing.

    <edit>I take it back this is very iffy at best. <edit>
  2. Replies
    28
    Views
    9,157

    I got mine working but it was a pain and I am...

    I got mine working but it was a pain and I am still tinkering.

    I have Two working together in a mesh. But I cannot seem to get my old GT5300 to work with them. (yet)
  3. I have seen that with mine. If you are going to...

    I have seen that with mine. If you are going to OC your RAM the easiest and most successful way for me has been to use the XMP settings.

    I tried just setting DDR4 3000 and it wont boot. Seems...
  4. Thank you GoNz0- Hate to be a pain but would...

    Thank you GoNz0-

    Hate to be a pain but would you mind elaborating? Is it too quiet? Is there distortion?

    Oh and if you have tried how does the Sonic Studio - virtual sound work?

    Thank you
  5. AdamC, A bit off topic but my guess is you...

    AdamC,

    A bit off topic but my guess is you need to plug into the rear connectors and have the driver detect that your speakers are connected. Looks like you are using the optical (digital audio)...
  6. SENNHEISER G4ME ZERO / Sonic SenseAmp & Sonic Studio - virtual sound

    Has anyone tried a 150 ohm headset like the SENNHEISER G4ME ZERO with this board?

    Questions:

    1) Will it drive the headset? Does it sound okay?

    2) If it will has anyone tried the virtual...
  7. Voltage not what I expected - Set to 1.31 and I see 1.288 (RIVE)

    Any idea why I would see 1.288 Core Voltage reported in CPU-Z & AI Tool Sensor when I set the voltage to 1.31 in the bios?

    I have disabled speedstep are there other power options i need to...
  8. Update.. New H100 came in... Temps under...

    Update..

    New H100 came in... Temps under control.

    This was a faulty cooler.

    Thak you for all the help
  9. Yeah.. Sent it in... Will pick this up again...

    Yeah.. Sent it in... Will pick this up again maybe Wed..

    By the way grotts where did ya get the ROG CPUZ skin?
  10. Well maybe the problem is bigger. I...

    Well maybe the problem is bigger.

    I connected the 2 stock fans. The system came up seemed like it was running cooler... Then the H100 died...

    Looks like I got an RMA to deal with.
  11. Well it is a bit weird. I have been experimenting...

    Well it is a bit weird. I have been experimenting with different fan connections. The on e you see here in the pic has the following connections:

    1 fan connected to CHA_FAN1
    1 fan connected to...
  12. System: i7-3960X, ASUS Rampage IV, GSkill...

    System:

    i7-3960X, ASUS Rampage IV, GSkill F3-19200CL9Q-16GBZMD ( 16 GB ), SLI-3way EVGA GTX580, Corsair AX1200 PSU, Corsair H100

    H100 is in push/pull using 4 COUGAR CF-V12HP Vortex
    ...
  13. Will check the contact pressure tonight. ...

    Will check the contact pressure tonight.

    There is no fan on the VRM other than the pull from the H100 radiator from above. Is there some other solution I should consider? I will post pics...
  14. Willco tonight. Right now I am thinking the...

    Willco tonight.

    Right now I am thinking the following:

    1) Custom push pull not configured right OR some of the fans are not working... When I plugged the fans into the MoBo I can get a reading...
  15. Sry did not imply you were wrong. I think there...

    Sry did not imply you were wrong. I think there is somthing wrong with my set up. There is NO way i could get the performace you are reporting. I get to 4.3 and core temps are esilly in the upper...
  16. Hm somthing is wrong then. I have my H100 in...

    Hm somthing is wrong then.

    I have my H100 in push Pull. I tied the 4 fans to the MoBo to better control the fans.

    Wonder if this could be a connection prob between the sink and the cpu?
    ...
  17. Thank you for the reply. I have a Corsair H100...

    Thank you for the reply.

    I have a Corsair H100 <- cooler. I am am just using the Auto for voltage. Using AI Suite I can see the Vcore is ( 1.352) VTT CPU ( 1.25), CPU VCCSA ( 1.25). Need...
  18. New to OCing with Sandy Bridge - Question about core temps I should expect.

    I am having a Devil of a time trying to OC this new setup.

    I am currently running my 3960x @ 4.1GHz

    I use X.M.P mode and the setting I adjust are:
    vCore Auto
    VTT,VCCSA 1.250
    disable...
  19. Replies
    8
    Views
    5,316

    HiViz you were right. I have to go into the...

    HiViz you were right.

    I have to go into the registry and disable AHCI then moved it ofer to the intel chip set and sppeds as advertised.

    The RAID/AHCI BIOS setting was not clear.

    Thank...
  20. Replies
    8
    Views
    5,316

    I see.. I originally had that setup....

    I see..

    I originally had that setup. installed the OS then added the RAID. Because I changed the BIOS setting to RAID on the intel it crashed the OS because it was expecting AHCI on that boot...
  21. Replies
    8
    Views
    5,316

    Thank you for the reply. That was one thing I...

    Thank you for the reply.

    That was one thing I thougt about. However I am running a RAID 10 on the intel. From what I can tell you are NOT able to use AHCI and RAID together. There also does not...
  22. Replies
    8
    Views
    5,316

    SSD performance problem - Ideas needed tx.

    Hello,

    Looks like I am not getting the expected performance from my new SSD.

    I have a Corsair Force 3 GT 480GB

    I am expecting ~545 MB/s read and ~490 MB/s write

    I am seeing about ~300...
Results 1 to 22 of 22