Search:

Hello,

In your case PCIE will fallback automatically to 4th gen speed and it will work alright.

Unless QFAN doesn't detect lowest fan speed like in my case. I have 4 DC fans with lowest speed at 28%. QFAN detects it at 28-33%, I've never been able to get 28% in all of them. Thus I just use Fan...

I'm not that sure, if that'd be the case you wouldn't be the only one with that issue.

Have you tried clearing CMOS by unplugging power cord and shorting CLRTC pins? They're at the bottom of your...

Does bios fan monitor shows rpm correctly or it's reversed too?

I thought maybe PWM signal is inverted but since in DC mode it behaves the same way, also any software controls fan just fine that's...

What's your bios version?

Also your cooler has PWM fan and you should leave its mode like that.

Doesn't hurt to try. Also your specs doesn't mention the second M2 drive. M2_1 goes directly to CPU just as the PCIe 5.0 that you're having issue with. I'm just wonder if your components are in...

What about moving M2 drive from M2_1 to another one?

Also have you tried running default bios settings without xmp?

Have you tried forcing lower PCIE Gen? Advanced -> SA -> PCIe. Does it run fine on 3rd gen?

xDDDDD

This is getting out of control Asus.

That's LGA1700-BCF from Thermalright, it's super cheap, it's all over the aliexpress and there is a rumor a lot of those are clones - not sure if that's an issue though. I'm thinking of getting one...

Sadly that's not enough for Asus. My board does the same. Runs stable on every stress test, but freezes every few days and/or USB turns off unless I disable PCIE NPM. Asus service found no issue and...

I don't know if it's Asus thing or newest gen chipset, but post boot time is nothing like it was before. PRIME Z690-A boots to login screen within aprox. 45 seconds. My previous build based on Z97...

How long have you waited on blank screen? It can have a hiccup and take a minute or two before it gets into boot screen. Also, do you have a speaker connected to FP header? You can try figure out...

It really depends on where do you live. I'd just google "thermal pad" and all stores around shows up.

Now I'm curious, how? :>



You can get it from any online store, just make sure it got right thickness.

Fans are always spinning max speed during post. Then bios kicks in and fans are spinning accordingly to your qfan setup. After getting into OS other software takes control over it. Perhaps you have...

Solid capacitors do leak - retro hardware fans knows about it. They're replacing them every 10~20 years. Tantalum caps don't leak - they explode if something happens xD If capacitor leaks then...

Hi ahfoo,

I was referring to OPs setup - he uses two sticks and he should populate A2+B2 only.

Hi,

How about follow the manual? ;)

93106

You're not supposed to use A1+A2 or B1+B2 with dual channel sticks.

Okay, you don't have to do anything to keep it like that. That's exacly UEFI feature.

That confuses me. Could you take a photo of what exacly you'd like to keep?

Hey,

As long as you use UEFI mode it will stay until Windows is loaded.

Hey owsianka,

We're on the same boat, my RMA got rejected and I'm in the middle of complain procedure. DM me @ discord DragDay7#9929 so we can chat.

You'd have to connect 2nd internet to main router to any LAN socket, enable dual WAN feature with load balance mode and select that LAN socket as secondary WAN.

93043

If for some reason you...

Hey there,

Are there any errors in event logs?

Things I would try (one by one):
1. disconnect everything except keyboard, mouse, monitor and ethernet (get rid of front panel hubs, additional...