Search:

Type: Posts; User: BigJohnny

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Did you reboot the router after setting it to...

    Did you reboot the router after setting it to manual and make the channel change?
  2. Clear your cache.

    Clear your cache.
  3. I dont have that model but can tell you my...

    I dont have that model but can tell you my battery wont support full performance gaming, G752VY. I have to have the brick plugged in and it still takes power from the battery.
    With a brand new...
  4. Thread: LCD broken

    by BigJohnny
    Replies
    3
    Views
    98

    I dontr think its as simple as replacing it with...

    I dontr think its as simple as replacing it with a higher refresh rate panel. All the hardware that drives it is located on the MOBO.
  5. The last several Ive bought were in a non sealed...

    The last several Ive bought were in a non sealed box and no static bag. Everything was there, protective film in place.
    I registered the warranty and called it a day. Been that way on the last 3 Ive...
  6. Replies
    2
    Views
    47

    Must be the Flux capacitor breaking down. ...

    Must be the Flux capacitor breaking down.

    https://www.oreillyauto.com/flux-500.html
  7. Replies
    2
    Views
    97

    Fast boot actually can reload problems. I leaver...

    Fast boot actually can reload problems. I leaver mine disabled.
    Detect HDD can be an instability issue. I know If I push my ram timings to tight or OC too high Ill get either Detect HDD or load GPU...
  8. FWIW always install the chipset drivers before...

    FWIW always install the chipset drivers before you install anything else. Install OS, Install Chipset, Install MEI then have at it with the rest.
  9. The VID tables are too high to leave anything in...

    The VID tables are too high to leave anything in auto since 10 series came out.
  10. Replies
    1
    Views
    155

    Ive been running win !! so far with little to no...

    Ive been running win !! so far with little to no issues. The last one they released in the DEV channel fubared my Ique so I rolled that one back. Other than that been working great.
  11. I use all of mine. It wont stop power draw but...

    I use all of mine. It wont stop power draw but overload those connected if you don't run what you need being all of them especially on a 64 core.
  12. Ive been working with the dev channel and keeping...

    Ive been working with the dev channel and keeping tabs on development. Im fairly certain all the reg hacks to get it to run on old gear have been disabled.

    Your link is dead.
  13. Replies
    3
    Views
    539

    You will have to find the BIOS file first. Then...

    You will have to find the BIOS file first. Then you can run the BIOS flash tool from the CMD prompt with admin privileges adding /nodate to the cmd line.
  14. What I usually do is set it to XMP and see where...

    What I usually do is set it to XMP and see where it goes and record all the numbers including tertiary timings. Then go back and do it manually changing one thing at a time. Yes it tedious but gets...
  15. Replies
    4
    Views
    129

    Im not seeing what you are using to cool with....

    Im not seeing what you are using to cool with. That makes a HUGE difference. If its air, you wont get far, if its AIO you will get a little more maybe. To squeeze everything it has to offer you need...
  16. Its been Beta (what they call beta is really...

    Its been Beta (what they call beta is really alpha) since its inception. I tried every version for a long time and eventually said screw it. Its bad enough that it has never worked correctly then to...
  17. I got fed up with multiple onboard sound devices...

    I got fed up with multiple onboard sound devices on multiple boards. I use TosLink optical out into a DAC then into an amp.....perfection.

    Adding insult to injury is the software.
  18. Not uncommon in a lot of keyboards. I have an old...

    Not uncommon in a lot of keyboards. I have an old POS USB that has nothing special in the least about it, logitech that I keep plugged in the sitting off to the side for when I need to get into BIOS....
  19. And this is why I don't run ASUS Software.......

    And this is why I don't run ASUS Software.......
  20. Replies
    4
    Views
    90

    I dont use the on board RGB headers, gave up on...

    I dont use the on board RGB headers, gave up on Aura/Crate long ago. I run the corsair and it has the option to change colors how you want to and a slider for opacity to dial back the Vegas effect if...
  21. Its more of a memory controller on your CPU....

    Its more of a memory controller on your CPU. Hitting 4000 consistently is a pipe dream on the IMC. I have one of two choices on a R6EE. 3600 with a lower latency or 3800 with a higher latency. Or...
  22. Replies
    4
    Views
    113

    Glad you got it sorted. Those puppies pop off...

    Glad you got it sorted. Those puppies pop off very easily. I generally put them on as one of the first things then route them through the back and wire tie them down tight so they don't move.
  23. Replies
    7
    Views
    200

    My G752VY came with one in the user service area...

    My G752VY came with one in the user service area and the other under the keyboard. I yanked what was in there and put 4X 16 GB Gskill ripjaws. Works great.
  24. Replies
    4
    Views
    113

    Either the leads to your start button on the case...

    Either the leads to your start button on the case are loose or not correctly connected or your MOBO isnt working as it should.
  25. ASUS isnt the best for keeping the latest up on...

    ASUS isnt the best for keeping the latest up on their website.

    MoKiChU usually gives out good advice. Not a single one of the drivers for my R6EE including chipset, MEI, Realtek, BT or pretty...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4