Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.45 seconds.

  1. That would depend on what bus the workload is...

    That would depend on what bus the workload is hitting, so bit of a nonsensical assumption! :D


    Makes more sense to test real world performance, that way you don't send the user on a goose chase....
  2. Hello, Test memory stability with Karhu...

    Hello,

    Test memory stability with Karhu Ramtest or HCI Memtest Pro.

    Increase VCCSA 20-30mv

    Increase DRAM Voltage 20 to 30mv
  3. Hello, The problem with SLI today is that...

    Hello,

    The problem with SLI today is that support is waning to put it mildly. NVIDIA have been slowly phasing out its existence for quite a while now.

    Speaking from personal experience with...
  4. I try not to get too hung up on synthetic tests...

    I try not to get too hung up on synthetic tests like AIDA, as there's too many variables when measuring latencies this low, such as background activity and system overheads.


    All depends if it's...
  5. You would need to put the system back to complete...

    You would need to put the system back to complete optimised defaults and see if the issue is still there. Otherwise, any advice could potentially just be leading you up the garden path (in the wrong...
  6. Hello, BSODs and WHEA hardware error events...

    Hello,

    BSODs and WHEA hardware error events can be caused by the following:

    Outdated or incorrect BIOS configuration

    Incorrect memory configuration

    Unstable...
  7. Replies
    5
    Views
    139

    1) PSUs produce their own coil whine. How much...

    1) PSUs produce their own coil whine. How much depends on the quality, type, specs, and size of the components used.

    2) The graphics card also produces some coil whine. Again, how much depends on...
  8. Hello, See Step 4 here:...

    Hello,

    See Step 4 here: https://www.youtube.com/watch?v=nJZIGUaEXvU


    The switches function is to set a threshold for current in order to switch between PBO controlled settings and manual OC...
  9. Hello, What is the PC's intended purpose? ...

    Hello,

    What is the PC's intended purpose?

    Which motherboard?

    Your memory is already overclocked, 3600MHz is beyond stock specification (PC3200).

    You can enable PBO from the Extreme...
  10. Neither memory vendors or MB vendors claim any...

    Neither memory vendors or MB vendors claim any guarantees with overclocking. As mentioned in my previous post, do some research into where the performance benefits lie.

    Pushing the memory...
  11. Use the ones under the Extreme Tweaker menu.

    Use the ones under the Extreme Tweaker menu.
  12. Hello, SOC Voltage above 1.2v is ill advised...

    Hello,

    SOC Voltage above 1.2v is ill advised and can cause irreversible damage to the CPU. Always best to do some research before purchasing memory kits, especially ones of such a high bin.

    ...
  13. Hello, The purpose of the QVL is to give the...

    Hello,

    The purpose of the QVL is to give the user the best chance of compatibility. It does not guarantee compatibility, as this isn't practical when speaking about overclocking. Whether it's 2 or...
  14. Replies
    6
    Views
    264

    Hello, As you have exhausted options beyond...

    Hello,


    As you have exhausted options beyond the CPU here is advice provided by AMD prior to RMA procedure.


    System stability issues such as BSODs and WHEA hardware error events can be...
  15. Replies
    4
    Views
    267

    Hello, 1) For best chance of plug & play...

    Hello,

    1) For best chance of plug & play compatibility look to purchase a kit verified by both the board vendor and memory vendor for your motherboard as listed on the memory QVL.

    2) Anything...
  16. Hello, Try GPU Tweak 2 or participate in the...

    Hello,

    Try GPU Tweak 2 or participate in the GPU Tweak 3 beta via Discord.


    https://discord.gg/PFuBcWPF
  17. Hello, Maybe look at your case ambients. below...

    Hello,

    Maybe look at your case ambients. below 100c is not uncommon for memory T-Junction, GDDR6X do tend to run quite warm.
  18. Hello, Use the PBO settings located under the...

    Hello,

    Use the PBO settings located under the Extreme Tweaker menu





    Short answer is it depends on your intended workload. Increasing the power envelope allows for some headroom in high...
  19. Hello, 70c seems absolutely normal for those...

    Hello,

    70c seems absolutely normal for those conditions.
  20. 4266 is the maximum validated frequency for that...

    4266 is the maximum validated frequency for that board, which means conditions need to be ideal. It's always best to opt for stability a couple of notches below the maximum validation.
  21. Hello, 1. Make sure to try both XMP I and XMP...

    Hello,

    1. Make sure to try both XMP I and XMP II profiles.

    2. VCCIO and VCCSA is CPU dependant, but high frequencies may need in excess of 1.3v. For 4K, start around 1.15v and work up.

    3....
  22. Replies
    2
    Views
    724

    Hello, Z590 boards are daisy chain topology.

    Hello,

    Z590 boards are daisy chain topology.
  23. Should always aim for maximum obtainable...

    Should always aim for maximum obtainable stability at 1T.
  24. Replies
    23
    Views
    1,671

    The LED should stop on the last code momentarily...

    The LED should stop on the last code momentarily before reattempting training, which will be 00. I don't have the board here to test, unfortunately.
  25. Replies
    23
    Views
    1,671

    Hello, Without basic information like this...

    Hello,

    Without basic information like this replication will be harder. Make sure you provide the Q-Code. If the board is failing POST stress tests, regardless of the values that are causing signal...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4