Search:

run the nvidia uefi firmware update.

set memory controller to auto or at the same as your sticks vdd.

gskill xmp profile sets 1.1, which is not stable.

Passing memtest is irrelevant.

it only proves that you don't have faulty cells that bitflip in between cell refresh.

To those encountering stability issues with 1505, its because the Memory controller VDD doesn't like to be too far below stick vdds.

reinstall the amd chipset driver package after the upgrade, and set legacy control panel power profile to balanced, the settings app power profile can be whatever you like it to be.

This is a legacy section of armoury crate, there is no win64 flash software for the z690 series, and i believe there won't be as the default Windows 11 configuration doesn't allow for spi drivers.

with amd, it was due to having an m.2 on the cpu.

Drayco, black screen crashes are usually software side, and atleast with nvidia products a result of directly accessing the hardwar sensors using unsafe mutexes, the corsair icue suite being one of...

download and install the DisplayID updater on nvidia's website

https://nvidia.custhelp.com/app/answers/detail/a_id/5233/~/nvidia-gpu-firmware-update-tool-for-displayid

ArmouryCrate.UserSessionHelper.exe has a fricking massive Handle Leak.

i'm currently seeing 242,000 handles - and there is no valid reason that a developer can spew for this number.

you identity the current number and type that + 0.05 into the field.

We're not talking about the single well publicised failure, we're talking about End users killing their cpu and blaming Asus for it.

This tool is not meant to be run on a busy system, its meant ot be run on an idle system.

Busy includes any vendor software that updates cheesey rgb components (especially RGB RAM)

There is no "Depends" math is math, if the cpu can't process some math at times its because its unstable.

this software seems really iffy with gskill ddr5, it randomly stops updating one or both sticks.

Nonsense, an overclocked system should not suffer random bsod or crash events, period.
1 offs every few months mean the system is not stable, period.

Prime95 is a tool in achieving that.
Should...

you don't have a strix e, so no, not same, stop cross posting.

do NOT, set command rate of ddr5 to 1n/1t

the nvidia driver doesn't cause page faults, this is a disregardable value since 99% of them are thrown by the Windows defender active scanner.

excessive dpc latency is due to bus errors, remove...

you have defective cpus or bad configurations, can't blame asus for choosing to veer off the QVL.

add 0.05v to pch voltage.

Memory controller voltage is on auto so its going to 1.30 by itself, clamp it to 1.25
set VDDQ and VDD to 1.35
set system agent voltage to offset and don't set an offset value, auto sets it at 1.25...

sonic studio is unstable trash and should be purged from all systems along with its Nahimic dependency,

asus has been aware of the fact the nahimic component causes graphical corruption and...

WMI corruption can be horrible, it actually breaks dotnet applications that perform graphics device queries, prevents nvidia drivers from installing (classic "Can not continue" error), and also but...

armory crate 5.1.5.0 shows fine with ryujin and motherboards, do a clean install of the software.