Search:

Type: Posts; User: Nate152

Search: Search took 0.02 seconds.

  1. Just for fun, I might start over and try again.

    Just for fun, I might start over and try again.
  2. I will agree it shouldn't need that big of a jump...

    I will agree it shouldn't need that big of a jump in voltage to be stable in adaptive mode.

    Are you running the latest bios ?
  3. All right The errors and BSOD's should tell...

    All right

    The errors and BSOD's should tell you, you need more Vcore in adaptive mode, at least that's what I'm getting anyway.

    1.392v didn't BSOD but threw errors, so that tells us you're...
  4. This screenshot above tells the story, you see 2...

    This screenshot above tells the story, you see 2 total errors in Hwinfo? These are cpu errors which means your cpu is crying for more Vcore.

    It should be ok where it is as long as you don't get...
  5. Ok you got a WHEA error but no BSOD? This...

    Ok you got a WHEA error but no BSOD?

    This tells me we're creeping towards stability and that you may need a little more voltage in adaptive mode.

    Try the offset at negative -0.022v.

    I'm...
  6. OK so the max Vcore was 1.36v with those...

    OK so the max Vcore was 1.36v with those settings, good but Boo on the BSOD !

    Try the offset at negative - .032v.

    This should should put the max Vcore to 1.37v, let's see if this stabilizes it....
  7. Thank you for the screenshots. It looks good...

    Thank you for the screenshots.

    It looks good in manual mode but is overshooting a good bit in adaptive mode. Setting SVID to Best Case and/or IA AC/DC Load Lines to .01 should keep the voltage...
  8. Ok, are you saying 5.0GHz with 1.36v is stable in...

    Ok, are you saying 5.0GHz with 1.36v is stable in manual mode but not adaptive mode?

    On the Extreme Tweaker Tab, CPU Power management, try setting:

    IA AC Load Line - .01
    IA DC Load Line - .01...
  9. Hi guys ! Adaptive mode does seem to overshoot...

    Hi guys !

    Adaptive mode does seem to overshoot the Vcore a little more, but you guys got it under control by using the offset in adaptive mode.

    Lower levels of LLC can help too, it's best to...
Results 1 to 9 of 9