Search:

Type: Posts; User: Silent Scone@ASUS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    5
    Views
    95

    The event logs indicate errors. Test...

    The event logs indicate errors.

    Test stability with a combination of Intel XTU stress test and Real Bench. Testing a CPU OC with a graphics benchmark suite isn't going to tell you anything worth...
  2. Limit the Aura Sync devices connected, and see if...

    Limit the Aura Sync devices connected, and see if the issue persists as per recommendation above (along with the UEFI settings, please).

    As I have the board here, I'll do my best to reproduce your...
  3. Thanks, although the UEFI config txt may be more...

    Thanks, although the UEFI config txt may be more useful, given the OLED Code is related to memory. Will test with iCUE installed tomorrow.

    Might be worth trying with UEFI defaults to rule out...
  4. I've just installed 1.07.35 along side LD 1.04...

    I've just installed 1.07.35 along side LD 1.04 and everything is working as intended, including resuming from S3. The OLED displays the Formula animation whilst in S3, and resumes cycling upon...
  5. I will attempt to rep this later, although I have...

    I will attempt to rep this later, although I have not encountered any issues with services crashing. As above, can you tell me the version of Aura and Live Dash?
  6. Replies
    43
    Views
    475

    No worries. No, Eventual DRAM Voltage has...

    No worries.

    No, Eventual DRAM Voltage has been available for some time and should be under the Extreme Tweaker menu. This allows you to set a VDIMM value for the OS that differs from the value...
  7. Some CPU need that much voltage for the...

    Some CPU need that much voltage for the frequencies users wish to run. 1.3v on this platform is fine, and there's no real-world evidence to suggest otherwise nor is it anywhere near enough to kill a...
  8. Can you confirm which UEFI version and version of...

    Can you confirm which UEFI version and version of Live Dash, please? I have the Formula XI cycling multiple info without issue on my personal system (0805). I also have Aura installed in tandem as...
  9. Replies
    43
    Views
    475

    You can soak test it without adjusting the other...

    You can soak test it without adjusting the other rails, yes. Worth pointing out you can use the DRAM Boot voltage setting to increase VDIMM at POST.
  10. Replies
    43
    Views
    475

    The voltages look quite low for frequency and...

    The voltages look quite low for frequency and density. Try in the region of 0.950-1v VCCSA and 1.05-1.1v VCCIO.
  11. Replies
    43
    Views
    475

    I would consider running Ramtest as it's a more...

    I would consider running Ramtest as it's a more stringent test of stability than HCI. If not overclocking the uncore, I wouldn't be concerned with setting a manual offset.

    What VVCSA / VCCIO are...
  12. Ok, please do. I have had feedback from some...

    Ok, please do. I have had feedback from some users saying the latest revision resolves the disconnects completely.
  13. Two DIMMs are a lot easier at the electrical...

    Two DIMMs are a lot easier at the electrical level both on the CPU and the board. Obviously, it's not possible to test 4 modules at a given speed on the Apex :D.

    If I can source your kit, I'll...
  14. I will grab one of the validated 4 DIMM kits @...

    I will grab one of the validated 4 DIMM kits @ 4266 if I can and will test. It can often come down to CPU IMC strength when going beyond 4K.
  15. That's one of the many reasons it's not...

    That's one of the many reasons it's not recommended to mix memory. Vendors bin these kits at the density they are sold in. The higher up the frequency spectrum you go, the less likely it is that...
  16. Replies
    7
    Views
    329

    Hi, Have yet to replicate this issue. Can you...

    Hi,

    Have yet to replicate this issue. Can you list any other monitoring tools that are running on the system?

    78953
  17. VCCIO and VCCSA settings scale depending on auto...

    VCCIO and VCCSA settings scale depending on auto rules. Some CPU require this much voltage for higher memory frequencies. If the system becomes unstable with less, then there's no issue letting the...
  18. 3 power cycles are normal for a default UEFI...

    3 power cycles are normal for a default UEFI configuration. Certain controllers require a power cycle, and memory training needs to take place, too. You can limit this by enabling MRC Fast Boot to...
  19. Prime with AVX enabled is still a brutal test of...

    Prime with AVX enabled is still a brutal test of stability on some platforms. As above, if the system is purely for gaming then it can be left out of ones testing methodology. I haven't ran Prime AVX...
  20. Sounds like something is loading the CPU enough...

    Sounds like something is loading the CPU enough to shift power states so the system isn't truly idle. I take it you've checked task manager, too?
  21. Have you checked Windows Power Plan? If you’re in...

    Have you checked Windows Power Plan? If you’re in Balanced, check the profile hasn’t switched the minimum to 100%, too.
  22. * With AVX Prime you may want to apply an AVX...

    *

    With AVX Prime you may want to apply an AVX offset from within the UEFI. It all depends what you intend to use the system for, if it’s strictly for gaming then Prime with AVX stability can be...
  23. Ok, please report back with how the fans operate...

    Ok, please report back with how the fans operate in Auto.

    Can you confirm the AI Suite version? Please adjust the curve from within the UEFI and see if this results in the same.
  24. Hi, 1. Can you confirm the UEFI version? 2....

    Hi,

    1. Can you confirm the UEFI version?

    2. Do the fans work ok on Auto?

    3. Have you attempted to adjust the fan curve?
  25. Replies
    73
    Views
    19,542

    Sticky: Hi, Can anyone experiencing profile saving...

    Hi,

    Can anyone experiencing profile saving issues on 1.9.4.4 please do the following.

    1. Attach a current DXDiag txt to their post.

    2. State clearly what function(s) fail to save.

    3. At...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4