Search:

I went there and change SOC to 1.00000....is it better

My actually configuration:

78931
78932
78933
78934

I didnt put here memory options.....

Then, please accept my apologies...

I know im new on this forum, so maybe i don`t know very well how things work, but i look always for common sense...

Please, if you want, give some more...

Im cooling with the Best:

Custom WC and Heatkiller IV WB Platinium version. The temps you see is because Sandra is stressing at 100% CPU and Memory....now i write is at 25º

Rockford:

If you...

Ok.

Done some heavy OC, but Sandra fater 1 minute give error......
I was posting here UEFI tune when my PC freeze. Had to reboot, and enter a previous not so agressive OC...seems to pass on...

Cant open second image.
Edit: never mind

First i must admit my almost ignorance and humble, on the dark wizardy of OC ....

So i went to my "Bios" creat a profile and insert the values above indicated....
I get this do far:

78826
...

Thank you for all text, advices and directions!

Yes i did, because i think is more straight to the point....if you now at i mean...

Meanwhile, i did update the FW to 1002, because your...

If i can hijack the tread.

Did it, run Sandra, but Cpuid only shows about 3900/3950Mhz....

First, thank you for the reply....all day at work, only now i could answer...

About memory's...aren`t you wrong?
These are Samsung B chips, Gskill Flare X 3200-14D16GFX...supposedly they OC quite...

78780
78781

This are my present configurations.....any help is welcomed:o
P.S. I use UEFI Bios 0601

Today i try (again) OC this board/Cpu...

My system:
2700X watercooled
Crossaihero VII + Seasonic 620
8+8 Flarex from Gskill

I had almost everything on Auto except memory to 3200 manually......

Mine temps, basically stock watercooled:

78775

Basically everything is auto except memory...

Thank you! Already working even AURA. Sweet W7:o
78158

Anyone using here W7? Mind share about CSM options?

Fist time i install W10, it was fast....about 8/15seconds....with tme became slow, its normal...

This weekend i install W7. It was a pain, but have to turn on CSM and turn off secure boot (dont...

CH7 + 2700X + 16GB FlareX kitt, first time i boot i did take +- 8 seconds to enter W10 Enterprise 10586.

No updates, and full of mods to turn off updates, telemtry, etc,etc...

Now, take a...

Do you have any more HD conected? Did you put the M2 on the slot more down?

No issues with mine here....

Welcome to the club...

I had to install this creepy W10...

OFF:
There is a way to install and put the loved W7 working...check on internet...

Its a old talk, about high flow vs low flow, from the times of Den blocks...
Personally i give more importance to a big radiator or a good one, than high flow´s...

even my old Q6600 G0 at 4Ghz,...

Thanks for the reply...

Very equal to mine configuration, The only problem i see on my system is use small tube (8mm inside) and the flow is a little low...

2700X default, on AIDA and Coretemp,...

Install a second m2, must be near graphic card. For what i did understand, it will share speed with the graphic, in opposite with the slot more down..

I would sell and buy a better M2 SSD....and...

I have Coretemp, Hwinfo, Aida64....

All show same temp...

Question: I don`t have OC, except memories at default 3200MHZ...
I have big watercooling, and i see the temperature easly jumping from...

Agree.
I was moments ago at 4100MHZ, but i get a error no W10...

Reboot to bios, and load Default options, and start from scratch. Too many options, sometimes is better re-start from 0,,,

:cool:

Thank you! Finally someone try to help. We can make prints on F12 if aint not wrong, and a pen usb pluged.

Soon i get a chance i will play with those options you sugest:p

It seems here the community is not very helpful with starters....