Search:

Hi C2001CARL
Thank you for your help and info.
But the procedure is so complex that I stopped trying to install the board. More after trying a lot of setup my windows and office were non activated...

@ C2001CARL
I received the SSD7103 board yesterday and no luck nothing happen. The board seems not to be detected. I setup as you said and I receive the prompt " No supporting host adapter is...

@ C2001CARL
Hi
No luck..I received my SSD7103 card yesterday and there is no way to make it run. The card itself is not detected. Here is the prompt "No supporting host adapter is found". I did...

HI c2001Carl
Thanks a lot for all these infos about the way to install this board. It seems to be hard :rolleyes:
At that time I'm still divided between the SSD7103 (PCIE Gen3) and SSD7505 (PCIE...

Hi C2001Carl
Thanks a lot for all these infos about the way to install that board. I'm still divided between the SSD7103 (PCIE Gen3) and SSD 7505 (PCIE GEN4).
Best regards
François

Hi C2001CARL
Thank you for your experience with SSD7103. Do you know wether the bootable array (RAID 0) can be used to clone or restore a backup of my actual OS and softwares?
Best regards

Hi
Thanks Biozzz for that info. I didn't look for PCIE Gen4 thinking it was too expensive but in fact it is roughly the same price as PCIE Gen3. I will dig your info more.
Regards
François

Hi
Thanks for sharing your (bad) experience. Is the ASUS Hyper X16 V2 a bootable nvme raid?
François

Hi everybody

Is there anybody having tested the Highpoint SSD7103 on a rampage 6 extreme encore.
Thanks for your experiences
François

Hi

Thanks for your answer and suggestions.

Software and firmware are both up to date.
The drivers is Samsung and connection is PCIe Gen3x4. (See picture below)
Francois

86761

Hi
Thanks for your reply and suggestions



Francois

86760

Hi

I'm using rampage 6 extreme encore, core i9-10900x, 32 Go RAM, SAMSUNG 970 EVO PLUS system disk.
Using samsung NVME driver ver 3.3.0.2003.
I noticed a big loss in random read performance (see...

The same here on R6EE...
Spmething to do?

Thanks. I will have a look

François

Hi all

I'm looking for explanation of GOP/VBIOS. What is it?
On my motherboard (R6EE) there an item in BIOS/UEFI : "State of GOP/VBIOS : Select a valid GPU".
What should be the GOP/VBIOS State...

Hi all

Overview of my rig : Rampage 6 extreme encore, core i9-10900x, 32 Gb ram.

When I first intalled I Have a lot of HDD, SSD and 2 nvme SSD I decided to make raid0 with HDD, Raid0 with SSD...

Yes I agree the best choice is a raid 0 with the 2 M2 SSD if you look for best configuration relative to speed. But it is not my problem because as soon that I use RST mode (to raid the M2) all my...

Hi
The problem is that I cannot boot from any sata drives because in RST mode all sata drives disappear from Boot Menu (see picture).
And my problem is not speed but be able to boot on CD/DVDROM to...

HI

I have a question about Boot between AHCI and Intel RST Premium mode.
85195
In this picture we can see a lot of drives to be selceted for boot . It is AHCI mode
...

Hi everybody
In the BIOS/UEFI menu ADVANCED then PCH STORAGE CONFIGURATION one can see the sata ports.
I have installed 2xSSD Samsung 860, 2 raid 0 (one with 2xSSD one with 2xHDD) and 1xCD/DVDROM....

OK for the fist answer. So I don't need to use it really.
For the second answer you talk about the AIO_PUMP connector. Is that connector on the pump itself or is it on the motherboard? I can't find...

Hi everybody
I have a question about XMP and CPU temp.

When i use the XMP mode but change nothing else (frequencies, voltage and so on for cpu and Dram, only switch to xmp mode) the cpu temp gets...

Hi thanks for reply.
I did what you have said for connecting the H100i to motherboard. But there are two questions :
Is the usb link an option to run the sofware ICUE or is the link mandatory for...

Yes i did it. I looked at the software and then unplugged it because it use the only one USB2.0 connector of the motherboard. I prefer to get 2 usb ports at the front panel of the computer. At that...

Hi everybody
My configuration is R6EE, core i9 10900x, corsair H100i RGB PLATINUM and i'd like to know your feeling about how to connect the H100i to the motherboard?
Here is what i've done :
Pump...