Search:

Type: Posts; User: XYchromosone

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds; generated 45656 minute(s) ago.

  1. EVGA GeForce RTX 2070 SUPER XC HYBRID GAMING 8GB Video Card any thoughts

    I am thinking of getting this card, does anyone own one who can give some thoughts or feedback, or maybe compare with an ASUS RTX 2070. This card is the only one i know of that comes with an AIO...
  2. Replies
    2
    Views
    124

    that's strange that a replacement mobo gives the...

    that's strange that a replacement mobo gives the same error. I wonder if in fact the mobo was actually replaced? Serial number is the best way to know, i keep all serial numbers of my hardware in...
  3. there is definitely updated AI Suit since 2015....

    there is definitely updated AI Suit since 2015. If your mobo webpage at ASUS drivers support page does not have it you can grab it from another model. I'll link the AI suite from my ASUS Maximus XI...
  4. it's unusual that you say performance is lower in...

    it's unusual that you say performance is lower in AHCI mode over IDE, I though they both used the same bus line?
  5. you haven't said what version of AI Suite you...

    you haven't said what version of AI Suite you have installed
  6. have you tried resetting the modem? there is a...

    have you tried resetting the modem? there is a reset button that you press for some seconds with a paperclip or a toothpick. the adim and password will be reset to default, which should be written on...
  7. Replies
    8
    Views
    2,494

    It's a pitty that ASUS doesn't seal the box in...

    It's a pitty that ASUS doesn't seal the box in plastic so that no one can take out any parts.
  8. I think your plan build is difficult to improve...

    I think your plan build is difficult to improve on. It seems more than sufficient for what you want to use it it, and it should be good for some years to come. Your choice for fans and AIO...
  9. Replies
    3
    Views
    213

    As I said a non k CPU can only be OC by...

    As I said a non k CPU can only be OC by increasing the BLCK. The RAM can be OC either manually . Or by XMP, followed by tightening the Primary, Secondary and Tertiary timings including RAM voltage....
  10. Replies
    7
    Views
    596

    It's pretty difficult to remove completely. After...

    It's pretty difficult to remove completely. After uninstalling, you also have to followup with the registry to delete many keys that only an Advanced use should attempt. In a nutshell once you type...
  11. when my older Maximus VIII Hero put out error 00...

    when my older Maximus VIII Hero put out error 00 it also had a lit CPU LED, and i learned that the CPU an i7 7700k was dead. My retailer exchanged it for a new CPU and it fixed that problem.

    A...
  12. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    884

    Please keep us updated

    Please keep us updated
  13. Replies
    3
    Views
    213

    I believe you can only overclock a non k CPU by...

    I believe you can only overclock a non k CPU by increasing BLCK, but you can not change multiplier. You might be able to change voltage to CPU but I am not sure, it has been a few years since I used...
  14. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    884

    @pndiode that's a nice tool kit that should...

    @pndiode

    that's a nice tool kit that should make the job of straightening bent pins easy.
  15. Replies
    20
    Views
    2,478

    My pleasure to be able to help you. Although this...

    My pleasure to be able to help you. Although this is a band aid approach, for it is best to actually resolve the actual problem than to suppress the service. Yes repairs are best done as an...
  16. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    884

    Just how many pins are bent? can you count them...

    Just how many pins are bent? can you count them accurately? If it's only a few pins, like 2 to 5 then why not give it a go at straightening them yourself. After all, they are already bent, so really...
  17. Replies
    20
    Views
    2,478

    A permanent solution is to stop the service from...

    A permanent solution is to stop the service from starting. There's a setting in "Task Scheduler" which calls the NahimicSvc32.exe service to start on Windows startup/logon, that you can delete....
  18. Replies
    10
    Views
    4,003

    try 1.35v for the Additional Turbo Mode CPU...

    try 1.35v for the Additional Turbo Mode CPU voltage
  19. Replies
    18
    Views
    975

    VCCSA @ 1.36v is high... definitely go manual and...

    VCCSA @ 1.36v is high... definitely go manual and use lower voltages.

    Update: I didn't realize you are running Team Group Xtreem 4133 c18. This runs at a higher voltage than 1.35v when OCing. I've...
  20. have you tried a different connection from GPU to...

    have you tried a different connection from GPU to your monitor, such as DisplayPort or HDMI? It might be a graphics driver problem. Maybe try a previous version of the nvidia driver.
  21. I suggest to get a 10 K ohm thermister [the...

    I suggest to get a 10 K ohm thermister [the common PTC or "Positive Temperature Coefficient" type] and plug it in to a 2 pin extension heat sensor input on your mobo, which I would think actually has...
  22. Replies
    1
    Views
    303

    I guess you already know that 7A to 7F q codes...

    I guess you already know that 7A to 7F q codes are reserved for future AMI DXE codes. So that is of no real help here. What RAM voltage are you using? If it's from the XMP profile it would be 1.35V @...
  23. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    884

    I'm not sure how you're going to clean out the...

    I'm not sure how you're going to clean out the liquid metal? Actually you could use a suction tube that you could put together using a vacuum cleaner e.g. I've made one in the past by taping a length...
  24. My max XI code and extreme do not have the...

    My max XI code and extreme do not have the D.O.C.P. setting in the UEFI?

    Update: I thought you had an Intel mobo, it's AMD based hence why you have D.O.C.P. in the BIOS and my Intel CPU based mobo...
  25. @Falkentyne Yes i installed windows from...

    @Falkentyne
    Yes i installed windows from scratch on both systems. If i hadn't done that and i experienced such lag all the time the first thing i would do is reinstall Windows.

    @MrAgapiGC
    I...
Results 1 to 25 of 255
Page 1 of 11 1 2 3 4