Search:

Type: Posts; User: Chapel

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Recently set my i7-7700k back to stock clocks. Fans run more often now? What voltage?

    I recently started bringing my i7-7700k back to stock clock speed down from 4.7Ghz, to 4.6Ghz and now just back to "default settings" because some games (mostly EA) just crash to desktop with...
  2. Replies
    4
    Views
    3,488

    that got me going. thanks guys!

    that got me going. thanks guys!
  3. Replies
    4
    Views
    3,488

    GL502VS won't install feature update 1709

    every time my GL502VS goes to reboot after feature update 1709 is ready to install, it fails. It just hangs at the ROG logo. The longest I let it go was 12 hours.
    Then I restart, it does it again....
  4. Switching from a Dual Intelligent Processors 5 OC to a manual OC (Maximus Hero IX)

    Hi there
    so, I've been relying on the DIP5 to OC my i7-7700K on my Maximus Hero IX. The problem I'm having is that even if I set the target voltage to 1.28v, it still gets into the 1.35V and starts...
  5. Replies
    3
    Views
    1,664

    RT-AC3200 question about antennae?

    I wanted to replace one of the antennae with an amplified antenna. Right now i have 2 5Ghz networks (one for AV and streaming and one for laptops)
    Which antennae correspond to the 5ghz-1 network and...
  6. When you say the 3 notches: do you mean the base...

    When you say the 3 notches: do you mean the base plate? Pretty sure mine is in the middle position on the holes in the base plate.
  7. page fault in nonpaged area iomap64.sys after latest BIOS

    After my latest BIOS update on my Maximus IX Hero, my computer keeps BSODing with page fault in nonpaged area and the faulting module is iomap64.sys

    It doesn't do it until I actually login to...
  8. I tried that AI Suite still says it needs...

    I tried that
    AI Suite still says it needs updating
  9. EZ Update won't install latest Intel Ethernet Driver

    EZ update keeps prompting me to update from version 12.13.17.7 to 21.1.30.0
    It says complete, but it comes back.
  10. Replies
    5
    Views
    5,793

    not yet. just enjoying the PC for a bit before I...

    not yet. just enjoying the PC for a bit before I start meddling again.
  11. Replies
    5
    Views
    5,793

    Is this a coaster?

    http://i.imgur.com/gtwRMVHh.jpg

    Are you encouraging liquids near the computer!?

    *sips tea, places it back on the coaster*

    http://i.imgur.com/ZS2Rudch.jpg
  12. Are these the primary timings? Speed Rating...

    Are these the primary timings?
    Speed Rating PC4-28800 (3600MHz)
    Tested Latency 18-19-19-39
    Tested Speed 3600MHz
    Tested Voltage 1.35V
  13. I see that this RAM supports 2 profiles. A...

    I see that this RAM supports 2 profiles. A regular performance mode (which I think this is set at) and a 1.35V mode (which I assume is 'maximum performance mode')
    Is there any drawbacks to trying...
  14. so, I figured I'd try tossing it in and it...

    so, I figured I'd try tossing it in and it worked.
    seems like it's operating at 1466Mhz according to CPU-Z (2932Mhz, I believe?) which is exactly what my 4000Mhz RAM was running at.
    The SPD channel...
  15. Yeah? So start over with all my overclocking as...

    Yeah? So start over with all my overclocking as well?
  16. Replacing memory. Do I need to set defaults to the XMP profile first?

    I'm going from 2x8 (16GB) TridentZ DDR4-4000 to 4x16 (64GB) DDR4-3600 (http://www.corsair.com/en-us/vengeance-lpx-64gb-4x16gb-ddr4-dram-3600mhz-c18-memory-kit-black-cmk64gx4m4b3600c18_

    The...
  17. well, I couldn't figure it out and I do this for...

    well, I couldn't figure it out and I do this for a living (A/V, digital telecom, skype, etc engineer) so I bought a Sennheiser GSX 1200 Pro Headset Amplifier which now runs and toggles my headset and...
  18. Yeah, I've done that. See, I'd chalk it up to...

    Yeah, I've done that.

    See, I'd chalk it up to Skype for Business too if it wasn't also doing it in Chrome.

    If I were to buy a PCIe soundcard, would it still be a RealTek in the end? I'm...
  19. I rebooted and I was able to get sound, but...

    I rebooted and I was able to get sound, but that's not a fix. It's happened a few times already.

    So in Skype for Business, if I'm getting IMs, I get all the sounds. If I get a call, I hear the...
  20. Problem with SupremeFX Sound - No sound certain apps

    So, I've been having weird issues with my Maximus IX Hero.
    First, everytime I plug something in, it says that the impedance is equal to or higher than 110ohm and amplification level has been set to...
  21. I turned the voltage down to 1300mv (from 1325mv)...

    I turned the voltage down to 1300mv (from 1325mv) and when playing BF1 (which was causing the high temps) it's now barely cracking 70c.

    amazing what 25mv does. It's like 10-20C cooler now
  22. well, these are still 4000mhz.

    well, these are still 4000mhz.
  23. Also, reading about the ddr4-4000 stability, I...

    Also, reading about the ddr4-4000 stability, I might go to 32-64gb of 3600 instead
  24. H440 case. Standard triple 120mm front intakes....

    H440 case. Standard triple 120mm front intakes. 140mm rear exhaust. Radiator on the top pushing out

    Cooler nice and snug using the pre applied paste*
  25. I used the Asus dual intelligent processor...

    I used the Asus dual intelligent processor program to OC it. Voltage is 1.325v. Ratio is 48 and cache ratio is 42x.*
    *
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4