Search:

Type: Posts; User: Shadowdane

Search: Search took 0.00 seconds.

  1. i9-9900K on Maximus X Hero (Overheating / Voltage Issue)

    I can't figure this out.. it seems the Maximus X Hero is completely ignoring the stock default Intel voltages. I got a i9-9900K a bit over a month ago upgraded from a i7-8700K and it's been a...
  2. Yah Adaptive Voltage seems to be completely...

    Yah Adaptive Voltage seems to be completely broken on now on 1101. Have a X Hero AC board and had been running at 4.8Ghz @ 1.22v since I got this board at launch. Now after upgrading the BIOS...
  3. Ideally you really want shoot for the lowest...

    Ideally you really want shoot for the lowest latency possible!! Raw memory bandwidth beyond about DDR4-3200 doesn't get you much honestly, you'd gain more lowering your access latency.

    CAS...
  4. Replies
    0
    Views
    1,275

    Maximus X Hero (Non Wifi) Availability??

    I managed to snag a i7-8700K today off Newegg!! So looking to get a motherboard very shortly.


    I'm pretty much decided I'm going to get the ROG Maximus X Hero motherboard! However it seems...
  5. Replies
    1
    Views
    1,235

    My 1080Ti just died... :(

    R.I.P. Asus GTX 1080 Ti OC Strix!

    Shows artifacts at stock clocks after the card gets above 68-70C and will usually hard lock or crash the game the any game after ~5-6 mins. Have to...
  6. GL502VM - Bluetooth Disconnecting Issues!!

    I'm stumped on this one and hope someone has seen these issues and know a fix!!!

    The Intel AC-8260 Wifi/Bluetooth card on this laptop seems to have problems. I purchased a Bluetooth mouse &...
  7. I figured out the problem, I had to completely...

    I figured out the problem, I had to completely uninstall the Intel graphics drivers to get the new ones to install.
    Not sure why that was the case, but it worked.
  8. GL552VW - Intel Graphics Driver v20.19.15.4300 won't install

    I can't get the latest Intel GPU driver to install on my laptop. The installer pops up saying this isn't compatible with this hardware.

    I downloaded it right from the Asus website:...
  9. not possible at all.. the GTX960M and CPU...

    not possible at all.. the GTX960M and CPU share a heatsink and fan, the nvidia driver doesn't know what the fan speed is. That is controlled by the BIOS.

    With any Nvidia Optimus system with...
  10. I tried clearing the CMOS last night and returned...

    I tried clearing the CMOS last night and returned to stock settings. I'm still seeing the same weird fan behavior with the AI Suite - Fan Xpert 3.

    I'm almost thinking it might be better to just...
  11. AI Suite 3 - Maximus VIII Hero (Freezing Up)

    I'm having 2 problems with AI Suite 3 which I haven't been able to figure out. Most recently I reinstalled Windows 10 as I thought I my old Windows install might of been the issue. But even with...
  12. Nice! Yah this issue had me stumped for a...

    Nice! Yah this issue had me stumped for a while. The fact that the description on the VRM Spread Spectrum setting says it increases system stability. So I had always left it on thinking it was...
  13. Well I thought I'd bump this thread as I found...

    Well I thought I'd bump this thread as I found the setting causing me the problem. It was the VRM Spread Spectrum setting!! Also with this disabled I can run a much lower voltage now!

    With the...
  14. Replies
    11
    Views
    12,074

    yah that's a great O/C... mine won't do above...

    yah that's a great O/C... mine won't do above 4.2Ghz @ 1.22v.
  15. Replies
    17
    Views
    35,870

    This is likely it... I haven't seen any screen...

    This is likely it... I haven't seen any screen overlay software that works yet with 64bit games.
  16. I did some testing and about 50% of the time even...

    I did some testing and about 50% of the time even at stock settings it wouldn't wake properly from Sleep or Hibernate mode. So I started doing a little trial & error in the BIOS. I made 2 changes...
  17. Actually it doesn't as there is no JDEC profile...

    Actually it doesn't as there is no JDEC profile for 2133Mhz, it tries to run at 9-9-9-27 which will post but won't boot to Windows.



    I'll have to test with everything at stock... I can't...
  18. They pass Memtest86+ at DDR3-2400 XMP settings......

    They pass Memtest86+ at DDR3-2400 XMP settings... should I just try slower speeds? These have no profiles for anything but DDR3-2400 & DDR3-1333. So I guess I'll have to guess at timings for...
  19. Corsair HX850

    Corsair HX850
  20. Yah I've tried upwards of 1.3v and it still does...

    Yah I've tried upwards of 1.3v and it still does this... 1.3v is a TON for just 4.2Ghz. This shouldn't be that difficult for such a modest overclock.

    It doesn't make sense that it would have...
  21. Replies
    3
    Views
    1,898

    You'll need to use the DTS Connect feature... ...

    You'll need to use the DTS Connect feature... that will output a DTS 5.1 signal over SP/DIF or HDMI.
    If you don't enable the DTA Connect option, it will only output PCM Stereo single which is 2...
  22. Maximus VI Hero - Boot Issue after Hibernate or Sleep

    I have an odd issue I haven't been able to resolve. My system will fail to boot after being put into sleep or hibernate. Otherwise it's perfectly stable and will post normally from a cold boot.
    ...
Results 1 to 22 of 22