Search:

Type: Posts; User: Braegnok

Page 1 of 14 1 2 3 4

Search: Search took 0.01 seconds.

  1. Try these settings for G.SKILL 6400 kit,.. except...

    Try these settings for G.SKILL 6400 kit,.. except keep your command rate at 2T for now.

    94455

    I think this same kit your using.

    94458
  2. Hello Hopper64, Are you running one 2x16GB...

    Hello Hopper64,

    Are you running one 2x16GB memory kit, total of 32GB system memory.

    If so,.. than these settings might help.

    Perhaps you need to adjust/loosen a few timings,.. mainly...
  3. Just simply pull the second drive. Only have...

    Just simply pull the second drive.

    Only have one drive installed "primary", after you install Windows on your primary drive,.. than add in your storage drives.
  4. Z690-APEX 1503u15.CAP: ...

    Z690-APEX 1503u15.CAP: https://onedrive.live.com/?authkey=%21AM2lT%2DCp39ooDAM&cid=30BFB56C0BC3A457&id=30BFB56C0BC3A457%21340309&parId=30BFB56C0BC3A457%21339415&o=OneUp

    I have tested over a dozen...
  5. I've been running the modified BIOS 1503 with...

    I've been running the modified BIOS 1503 with AVX-512 the past few months,.. system is stable running XMP.

    G.SKILL 6400:
    94070

    Corsair 6600:
    94071

    Personally I feel with DDR5 and Z690...
  6. Replies
    4
    Views
    419

    I'm running Seagate FireCuda 530,.. no bending...

    I'm running Seagate FireCuda 530,.. no bending with the Z690-I Strix stacked heatsink, if using correct spacers & pads.

    93920

    93921
  7. Replies
    4
    Views
    419

    Hello, I'm running single 4TB M.2 with the...

    Hello,

    I'm running single 4TB M.2 with the A4-H20 chassis, my drive temps average 28c.

    93908

    93909

    93910
  8. Replies
    7
    Views
    393

    Hello PegasusRideR, I'm using M.2_2 socket for...

    Hello PegasusRideR,

    I'm using M.2_2 socket for my primary drive,.. and my GPU runs @ x16.

    93840

    I needed to remove M.2_1 heatsink for clearance, due to active backplate on GPU.

    93841
  9. Hello mini-itx, No, absolutely never apply...

    Hello mini-itx,
    No, absolutely never apply excessive pressure to the top of the PCB in order to seat it onto the main board.

    You want to carefully align the top FPC connector with the BTOB socket...
  10. Hello Dunkelstar, I currently have three Asus...

    Hello Dunkelstar,
    I currently have three Asus Z690 motherboards running large format NVMe M.2 primary drives,.. haven't had any issues installing Windows.

    Seems like others I have also had a few...
  11. If your planning a build log for a system to run...

    If your planning a build log for a system to run 4-GPU SLI,.. Z590 platform is not an option I would consider.

    Intel Z590 Chipset only supports 24 PCI Express Lanes....
  12. A-Tech Memory released a DDR5 128GB Kit (4 x 32...

    A-Tech Memory released a DDR5 128GB Kit (4 x 32 GB Modules) back on June 6, 2022....
  13. I'm running iCue ver. 4.24.193 with current...

    I'm running iCue ver. 4.24.193 with current Nvidia Game Ready Driver ver. 516.40,.. no issues.

    I do not use Armoury Crate. I disable "Download Armoury Crate" in BIOS, and perform clean Windows 11...
  14. Personally I would keep: One is - Part No.-...

    Personally I would keep: One is - Part No.- 90MB1810- M0UAY0; Manufacture date of 2021-11 Purchased from Newegg; from a Australia Company.

    The part # 90MB1810-MOUAYO is not listed on any...
  15. Replies
    2
    Views
    784

    I started loading profiles into a new 2022 Apex...

    I started loading profiles into a new 2022 Apex board yesterday, as I type profile name the Chinese Characters appear to the right.

    93435

    I thought it was vary strange, does not seem to effect...
  16. Replies
    49
    Views
    10,439

    1503 with AVX-512. :cool: 93425

    1503 with AVX-512. :cool:

    93425
  17. If you need AVX-512 use beta BIOS 1503 with...

    If you need AVX-512 use beta BIOS 1503 with modified MCU 15.

    Otherwise if you do not need AVX-512 than latest official BIOS 1505 with MCU 18 from Asus support site is my recommendation.

    Beta...
  18. +1,.. the G.SKILL 2x 32GB 5600 kit is not listed...

    +1,.. the G.SKILL 2x 32GB 5600 kit is not listed in Apex QVL, you may need to tune manually.

    I have tested two of the 2x 32GB kits listed in Apex QVL, they both run in XMP 1 just fine on my Apex...
  19. The latest version (MOUAY1) January 2022 is what...

    The latest version (MOUAY1) January 2022 is what your looking for. https://www.igorslab.de/en/1-motherboard-2-faces-asus-rog-maximus-z690-apex-review-with-teardown-ram-adaptive-core-oc/
  20. Replies
    49
    Views
    10,439

    DDR5-4800MHz CL30 @ 1.10V does vary well for...

    DDR5-4800MHz CL30 @ 1.10V does vary well for daily usage,.. benchmarks are similar with DDR5-6000MHz CL36 @ 1.35V.

    DDR5 memory performance scaling with Alder Lake Core i9-12900K:...
  21. Replies
    49
    Views
    10,439

    Hello Babtista, Yes I'm using Windows 11 Pro...

    Hello Babtista,

    Yes I'm using Windows 11 Pro 64-Bit OS

    I generally play @ 4K high settings, quality DLSS with no issues.

    3DMARK Default Settings: http://www.3dmark.com/spy/28549203

    C...
  22. Replies
    49
    Views
    10,439

    I just updated MZ690A from 1302 BIOS to latest...

    I just updated MZ690A from 1302 BIOS to latest version 1505.

    Running XMP 1 with G.SKILL 6400 kit,.. everything is stable.

    93352

    Apex system was fully stable with 1302 BIOS with 6400MHz kit...
  23. Hello martin-m, The quickest solution is to...

    Hello martin-m,

    The quickest solution is to simply remove the factory heatsink & tray from your MP600 Pro XT drive.

    Install the bare drive into motherboard M.2 slot, and use the motherboard...
  24. Hello, have you tried using the standalone...

    Hello, have you tried using the standalone version of Aura Sync Utility: https://www.asus.com/campaign/aura/us/download.php

    Standalone Aura Sync Utility Version 1.07.79 V2.2. works fine on my...
  25. Thanks mate, Temps are fine so far under daily...

    Thanks mate,

    Temps are fine so far under daily usage.

    I really haven't ran any sustained heavy loads yet. Aside from RealBench V2, Karu memory test, y-cruncher.

    93315
Results 1 to 25 of 330
Page 1 of 14 1 2 3 4