Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    4
    Views
    97

    Hmmm...I have to say...I don't use sleep Very...

    Hmmm...I have to say...I don't use sleep

    Very often sleep issues are memory related...

    Maybe play with DRAM voltage and/or SOC voltage...

    Not sure what problems 128GB will present on sleep...
  2. Replies
    2
    Views
    73

    Just a guess...but maybe your CPU has an iGPU...

    Just a guess...but maybe your CPU has an iGPU built in that has that max resolution....and your stand alone GPU has a different max resolution.

    The standalone will retain its max resolution....
  3. Replies
    34
    Views
    468

    You're welcome :o If you are seeing this and...

    You're welcome :o

    If you are seeing this and you think you are switching off your machine...it will be fast startup in Windows....hibernating instead of switching off PC.

    You can disable fast...
  4. I can confirm that for you first hand...all...

    I can confirm that for you first hand...all cooling from z390 is compatible with socket on Z490 :)
  5. Just reflash BIOS 1 using BIOS flashback method ...

    Just reflash BIOS 1 using BIOS flashback method

    You could also carefully inspect socket and reseat CPU making sure that any ncooling is placed and tightened down evenly, assuring that the CPU is...
  6. Replies
    34
    Views
    468

    30 and 40 are recovery from S3 and S4 sleep...

    30 and 40 are recovery from S3 and S4 sleep respectively
  7. Do you have active arflow over the area?....i.e....

    Do you have active arflow over the area?....i.e. afan pointed at the general area?

    Is that reading accurate?
  8. AA means the BIOS has handed over to the OS...if...

    AA means the BIOS has handed over to the OS...if you are not getting display...maybe replace cable to monitor...check display components...the board seems to be booting fine...

    Have you reflashed...
  9. Replies
    6
    Views
    270

    Nate is, of course, correct...you need same...

    Nate is, of course, correct...you need same memory amount etc to SLI properly...you can find hacked drivers for same gen stuff but it's always a compromise and might not work well...
  10. You have to pay for it (and I have no link to the...

    You have to pay for it (and I have no link to the software or writer) but the best test for memory instability is Karhu RAMTest

    This will very quickly tell you if your RAM is stable in the OS
    ...
  11. Replies
    1
    Views
    86

    https://rog.asus.com/forum/showthread.php?27981-Sp...

    https://rog.asus.com/forum/showthread.php?27981-Sponsorship-Requests
  12. Replies
    20
    Views
    323

    Have you reflashed the BIOS ? BIOS flashback...

    Have you reflashed the BIOS ?

    BIOS flashback method?

    Maybe replace BIOS battery on the board...

    Best BIOS for Haswell E was end of 2xxx series....
  13. Run "sfc /scannow" in Command Prompt (open as...

    Run "sfc /scannow" in Command Prompt (open as admin)....

    Maybe clean OS install time?
  14. Not sure to be honest...that rail has it's own...

    Not sure to be honest...that rail has it's own LLC and some variation is to be expected...it's not much of a difference

    Sorry missed your last post....mem can get hot....maybe airflow is not as...
  15. You need one stick of RAM in recommended slot for...

    You need one stick of RAM in recommended slot for single stick config....gpu...CPU (cooled and CPU fan connected) 24pin and 8 pin power cables

    No drives

    Keyboard connected
  16. Replies
    5
    Views
    160

    What frequency are you trying to achieve? What...

    What frequency are you trying to achieve?

    What is BIOS setting for SA and IO voltage?
  17. I just mean at the lower end of the useful...

    I just mean at the lower end of the useful section....for ASUS LLC5 at the moment...maybe 6

    If you want your CPU to live a long time then lower LLCs for lower or no OCs is, of course the way to...
  18. Replies
    4
    Views
    262

    Hey toronto699!...not often we get the drop on...

    Hey toronto699!...not often we get the drop on you bro!...hope all is well!...:)
  19. I ran 4000MHz on a Gene with a couple of...

    I ran 4000MHz on a Gene with a couple of 9900KSs...XMP and up and running...

    Most other times I had to adjust something
  20. You need an oscilloscope to study this stuff...

    You need an oscilloscope to study this stuff accurately...it's all about transient response.

    LLC 5 or 6 is a good place to be for a happy OC...get away with lower LLC if you can....Vdroop is a...
  21. Replies
    4
    Views
    262

    Nvidia Hotfix 445.98 out

    Nvidia Hotfix 445.98 out

    https://nvidia.custhelp.com/app/answers/detail/a_id/5022/~/geforce-hotfix-driver-version-445.98
  22. Really depends, as always on the hardware...

    Really depends, as always on the hardware combo...memory controller etc....if you push too far you would see a couple BSODs...that's all.

    Yeah...there will still be a bit of Vdroop...normal
    ...
  23. OK so if the voltage is staying at 1.2 I would...

    OK so if the voltage is staying at 1.2 I would expect idle to be a bit higher than the idle temps of something that is downvolting

    Quite often SA and IO are overvolted at auto you could certainly...
  24. OK it downclocks...but maybe not...

    OK it downclocks...but maybe not downvolt....manual voltage and SA and IO at 1.2 all contribute to a bit more heat than typical idle voltage maybe?

    How long ago was it delided? What liquid...
  25. Is it downclocking and downvolting at idle?...if...

    Is it downclocking and downvolting at idle?...if not then maybe temps will be a bit higher at "idle"...

    Load temps sound OK
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4