Search:

Type: Posts; User: Nate152

Page 1 of 20 1 2 3 4

Search: Search took 0.15 seconds.

  1. Hi rolani4 Those voltages are a bit high,...

    Hi rolani4

    Those voltages are a bit high, would set VCCIO and System Agent voltage manually to 1.25v and see how it goes.
  2. Replies
    7
    Views
    66

    Hi Furious1964 What fans are you using and are...

    Hi Furious1964

    What fans are you using and are they Aura Sync compatible?

    If they are compatible, you should be able to control them with Aura Sync, Device Control.

    You can check for...
  3. Hi rjbarker I personally use manual mode and...

    Hi rjbarker

    I personally use manual mode and just set the primary timings, then raise the frequency one step at a time. The sub timings will change accordingly as you increase the frequency so...
  4. Replies
    2
    Views
    113

    Hello fresH229, Are you turning off the psu ...

    Hello fresH229,

    Are you turning off the psu when you shut down? If so, it's normal to do a double boot.
  5. You have one of the best psu's you can get, I...

    You have one of the best psu's you can get, I find it strange swapping a pcie power cable would give you better results but it is what it is. Good to see you're making head way with your thorough...
  6. Hello martine-dee, I have no idea how GPU-Z...

    Hello martine-dee,

    I have no idea how GPU-Z reads the power connectors but, what looks like is happening is your ROG Strix 3090 is throttling from hitting the power limit.

    Do you have GPU...
  7. Hello frisbop, Welcome to the ROG forum ! I...

    Hello frisbop,

    Welcome to the ROG forum !

    I presume you have the ROG Strix 2070 Super.

    If your system is running at default settings, what comes to mind is your psu.

    Asus/Nvidia...
  8. Replies
    1
    Views
    847

    Hello Jlnst86 Can you try connecting your ssd...

    Hello Jlnst86

    Can you try connecting your ssd to the first M.2 slot and see if this allows you to enable CSM, you may have to configure the M.2 slot.

    Then you should be able to install windows.
  9. Hi AndrewGr Welcome to the ROG forum ! All...

    Hi AndrewGr

    Welcome to the ROG forum !

    All good with stability but I see your cpu voltage (VCORE) is 1.492v for a maximum. If the cpu is on auto, try manually setting the cpu voltage to...
  10. Replies
    7
    Views
    490

    Even though the sound card is just x1, it could...

    Even though the sound card is just x1, it could be affecting the lanes too.

    One way to diagnose is disconnect everything except the 2080 ti's and your boot drive and see how this looks.

    Then...
  11. Replies
    7
    Views
    490

    Here is more from the ASUS spec sheet. The fact...

    Here is more from the ASUS spec sheet. The fact everything looks good with just a few devices installed pretty much points to, too many devices or configuration, your motherboard manual should tell...
  12. Replies
    7
    Views
    490

    Hi rodval Intel states a maximum of 48 PCIe...

    Hi rodval

    Intel states a maximum of 48 PCIe lanes on the 10980xe.

    From the Asus spec sheet:

    4 x PCIe 3.0 x16 (x16, x16/x16, x16/x0/x16/x8, or x16/x8/x8/x8 mode with 44-LANE CPU

    It looks...
  13. All right, Power down and disconnect the...

    All right,


    Power down and disconnect the sata ssd, then boot up and see if the M.2 drive is recognized, you'll want the sata drive disconnected when installing windows.

    If the M.2 drive...
  14. Hello tahahassan Code 99 Can sometimes be a...

    Hello tahahassan

    Code 99

    Can sometimes be a display issue with different types of cables or a gpu issue, seeing how you have display, we can rule that out.

    Can be a peripheral issue such as...
  15. Thread: Upgrade

    by Nate152
    Replies
    8
    Views
    377

    Hi BearCat I'm not sure how feasible it would...

    Hi BearCat

    I'm not sure how feasible it would be to upgrade to z590 right now when Alderlake is set to launch in the second half of 2021. It would be worth waiting a few more months as Alderlake...
  16. Replies
    1,030
    Views
    637,413

    Sticky: You're welcome ! I'm sorry to hear your ROG...

    You're welcome !

    I'm sorry to hear your ROG Strix 1070 is failing, I'm even sorrier to see the 3-year warranty has expired.

    This hurts me like a soaring spear right in the chest.
  17. Thread: PC Monitor

    by Nate152
    Replies
    2
    Views
    372

    Posting in the ROG forum, I would think you want...

    Posting in the ROG forum, I would think you want a gaming monitor.

    Things to consider

    Panel type

    TN - High refresh rate, poor viewing angles, colors not as good as VA or IPS panels.
    VA -...
  18. X.M.P. is an easy one click way to set your...

    X.M.P. is an easy one click way to set your memory to its rated specs. Since you're setting the ram manually, you don't need to enable X.M.P.

    Once you get cpu temps under control, on the extreme...
  19. Replies
    3
    Views
    436

    Hey toronto699 When I click on the link you...

    Hey toronto699

    When I click on the link you provided, it's saying it's not secure.

    Click the pic to make it bigger
    87858
  20. Hi hawkhandler Have you renamed the bios file...

    Hi hawkhandler

    Have you renamed the bios file to SZ490E.CAP

    This should get it to read as a proper bios file.
  21. Hi psoutrage39 In theory it should be ok,...

    Hi psoutrage39



    In theory it should be ok, you get 75 watts from the pcie x16 slot and 150 watts from the 8-pin pcie cable which = 225 watts.

    But.... I personally would use two separate...
  22. Replies
    1,030
    Views
    637,413

    Sticky: Sorry for the late reply. The update is for...

    Sorry for the late reply.

    The update is for Strix 1070's with Micron memory, it helps with Micron memory stability and overclocking. All later ROG Strix 1070's should have the latest Vbios update....
  23. Sorry for the late reply, I went on a trip and...

    Sorry for the late reply, I went on a trip and was there longer than I planned.

    All right, no big deal about posting screenshots, only thing I can say is keep trying, it should work as .png's are...
  24. If you used thermal paste between the die and...

    If you used thermal paste between the die and IHS, this won't give as good of results as liquid metal. However, 72c is a good temp.

    I see you have 16GB Crucial Elite, is it running at its rated...
  25. Replies
    2
    Views
    821

    Hi charliep17 Check in the Nvidia control...

    Hi charliep17

    Check in the Nvidia control panel Vertical Sync is set to "Use the 3d Application Setting", then in the game settings check that Vertical Sync is set to off. This should put gpu...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4