Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 53 minute(s) ago.

  1. The tech media isn't well known for covering...

    The tech media isn't well known for covering overclocking well or in fact at all in most spaces, so when it comes to halo kits such as these there won't be much coverage. Roman is the only one that...
  2. 1) Confirm no DOCP/XMP is applied and memory is...

    1) Confirm no DOCP/XMP is applied and memory is also at complete defaults

    2) Try reseating the CPU and cooler whilst checking for any bent pins and even mounting pressure.

    3) Reseat the GPU
    ...
  3. Hello, Earlier cards require an updated...

    Hello,


    Earlier cards require an updated VBIOS in order to use REBAR. Have you downloaded and flashed the latest VBIOS from the vendor support page?
  4. Hello, Please have a read of this information...

    Hello,

    Please have a read of this information piece regarding mixing memory kits and why it's ill-advised. Whereas the post is now fairly old, the fundamentals of overclocking memory and the laws...
  5. Hello, as above please confirm you're using the...

    Hello, as above please confirm you're using the latest drivers and firmware.

    These errors can also occur sporadically if FCLK is pushed too far or is unstable, revert MCLK and FCLK to stock by...
  6. Good to see you guys managed to bag some of those...

    Good to see you guys managed to bag some of those amazing kits and put them to good use. Won't be many on the market!
  7. Hello, If both XMP 1 and 2 profiles are...

    Hello,

    If both XMP 1 and 2 profiles are stable, it's usually better to opt for XMP 1. What values are applied depends on what the memory vendor has programmed into the SPD table. This can vary...
  8. Hello, What software are you referencing for...

    Hello,

    What software are you referencing for these sensors? If it's unclear, check with the author of the application.
  9. Hello, If in AUTO the auto rules will scale...

    Hello,

    If in AUTO the auto rules will scale the voltage in accordance with memory frequency. Select manual and input the desired value.
  10. Hi, Do you intend on running NVME RAID? If...

    Hi,

    Do you intend on running NVME RAID? If so, a driver is still needed.
  11. Replies
    8
    Views
    364

    Given the above, the only real recommendation is...

    Given the above, the only real recommendation is to use a reputable power supply brand. These things are the byproduct of natural phenomenon in the world of electronics that's mostly outside of ones...
  12. BD can also be VCCSA related. This platform is...

    BD can also be VCCSA related. This platform is sensitive on these signal rails, so you'll need to adjust the value till the cold boot issue desists. 4K can be tough for those CPU in certain configs....
  13. Replies
    4
    Views
    91

    Hello, From the AI Overclock Tuner menu select...

    Hello,

    From the AI Overclock Tuner menu select either XMP or Manual depending on your preference, then scroll down to see CPU/Cache Voltage, set this to manual and apply the desired value.
  14. Hello, 1. Disabled will leave the CPU to...

    Hello,

    1. Disabled will leave the CPU to operate within Intel's power envelope.

    2. Enabled allows the the CPU to max out current limits, meaning the user doesn't need to set these power...
  15. Hello, This is a memory training code. The...

    Hello,


    This is a memory training code. The applied overclock settings are not stable enough to pass POST stress tests consistently. Try firstly increasing the DRAM voltage to 1.45v.
  16. Hello, as above the lower SKU CPU have reduced...

    Hello, as above the lower SKU CPU have reduced lanes on this platform.
  17. Hello, If only happening when opening Ryzen...

    Hello,

    If only happening when opening Ryzen Master, the app is likely trying to address the CPU in a way that is causing the system to think it's entered a different power state. It's possible to...
  18. Hello, That depends, what feature on the...

    Hello,

    That depends, what feature on the Extreme is it that's tempting you to switch?
  19. Are you combining multiple memory kits? If so,...

    Are you combining multiple memory kits? If so, what the the other replies in the thread are telling you is correct.
  20. As above, as each individual CPU is different....

    As above, as each individual CPU is different. You will likely find that obtainable clocks increase marginally with an AIO or custom cooling as air cooling doesn't offer enough thermal headroom on...
  21. Hello, To confirm, the system functions ok at...

    Hello,

    To confirm, the system functions ok at stock, but you wish to undervolt it?
  22. Hello, hard to say. Could you maybe upload a...

    Hello, hard to say. Could you maybe upload a video? Sounds like a signal issue from the display.
  23. Replies
    5
    Views
    179

    Hello, It's not worth risking fitting sinks...

    Hello,
    It's not worth risking fitting sinks found on alternative products. They'll either be inadequate or won't fit. As above, your best bet is to look for a spare or repairs or damaged style...
  24. If it's only happening when XMP/DOCP is enabled,...

    If it's only happening when XMP/DOCP is enabled, try increasing DRAM voltage to 1.4 - 1.45v

    IOD VDDG around 1 to 1.05 and CCD around 0.98 to 1.05. See if this helps.
  25. Hello, instability at idle or light load is...

    Hello,

    instability at idle or light load is quite indicative of insufficient VCCIN on this platform
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4