Search:

Type: Posts; User: D_BRASCO

Search: Search took 0.00 seconds.

  1. Very few have gotten a 5000 chip to boot at...

    Very few have gotten a 5000 chip to boot at 4000mhz. The only way is winning the infinity fabric silicon lottery. You should be able to set the AI overclock tuner to Manual, then set Memory Freq to...
  2. You can flashback to any previous bios using a...

    You can flashback to any previous bios using a flash drive and the bios flashback button on the back of the machine. I've downgraded and moved back to the next release multiple times.YRMV
  3. modDIY has a 20 Pin USB 3.0 Internal Header Y...

    modDIY has a 20 Pin USB 3.0 Internal Header Y Splitter Cable that will allow you to use 4 ports at 3.0 speed, but I still think you can only use 2 of the 4 ports at 1 time.
  4. I've had no trouble running G. Skill...

    I've had no trouble running G. Skill F4-3600C16Q-64GTZNC at 3800mhz @ 1.38V on my Hero with a 3900xt or my Dark Hero at 3800mhz @1.38v with a 5950x
  5. I'm running this G. Skill set F4-3600C16Q-64GTZNC...

    I'm running this G. Skill set F4-3600C16Q-64GTZNC on my CH8DH. 64GB @ 3800MHz using 1.36v 16-19-19-19-39, with a 5950x at 1900MHz on Bios 3204
  6. Replies
    0
    Views
    363

    Crosshair VIII Dark Hero Memory Clock

    I have an issue with the memory clock and hope someone can help. I've had a CH8DH running a 5950x, 64GB of G. Skill Trident Z "Hynix" @ 3600 with a 3090FE for a little over a month with really no...
  7. Hardware Unboxed just released a YouTube video...

    Hardware Unboxed just released a YouTube video referencing his own system using the ASUS ROG Stix 850 power supply shutting down if he uses the CPU heavily and plays a game. Maybe it's a power supply...
  8. I have a similar system with a 3090FE, but my...

    I have a similar system with a 3090FE, but my power supply is 1200 watts. I've not experienced any driver failures and I have been playing Cyberpunk 2077

    Have you tried to use the Hotfix driver? ...
  9. I don't remember what the LED status was when the...

    I don't remember what the LED status was when the crashes happened, sorry. Since adjusting DRAM voltage my 64G of ram no longer crashes the system randomly. I also use sleep and have no issue waking...
  10. The problem with my DH was in the Bios/HWINFO you...

    The problem with my DH was in the Bios/HWINFO you could see the motherboard was already under volting the DRAM to like 1.34v with DOCP enabled. DOCP is supposed to be 1.35v at 3600mhz for my GSkill...
  11. Replies
    2
    Views
    421

    I had this problem due to a conflict with ICue...

    I had this problem due to a conflict with ICue SW. You didn't state if you had any other RGB SW installed. If you are using ICue you can uncheck Enable SDK in settings and remove the Asus folder from...
  12. I had to raise my DRAM voltage to 1.36 from 1.35...

    I had to raise my DRAM voltage to 1.36 from 1.35 to run 64G 4x16 and stabilize my Dark Hero. I'm on Bios 3204
  13. No problems for me and I'm running (4x16) 3600...

    No problems for me and I'm running (4x16) 3600 cl16 G.Skill Trident Z Neo Series RGB with a 3900xt
Results 1 to 13 of 13