Search:

Type: Posts; User: RedSector73

Page 1 of 20 1 2 3 4

Search: Search took 0.36 seconds; generated 57 minute(s) ago.

  1. TPM is within motherboard BIOS or the TPM Device...

    TPM is within motherboard BIOS or the TPM Device if you have one installed, that's about the limit of my knowledge on them ATM. I would not expect any issues, in that I have changed CPU in active TPM...
  2. It's nice MB, post some pics when you are done ;)...

    It's nice MB, post some pics when you are done ;)

    DDR4@3600 CL16 Dual Rank (DR)x2 or Single Rank (SR)x4 would be speed recommendation vs cost or if money no object ... what I have DDR4@3800 CL14...
  3. For the RAM there are three QVL lists. ...

    For the RAM there are three QVL lists.

    Motherboard Manufacturer
    AMD https://www.amd.com/en/products/ryzen-compatible-memory
    Ram Manufacturer


    Suggest g.skill neo branded (work on all...
  4. Holly molly, looks like you have found the right...

    Holly molly, looks like you have found the right garden path. +rep for sharing this, we all make mistakes and sharing is way to learning for others.

    Mobo should be ok. That CPU won't be so luckly....
  5. Ok, you need to manually set SOC Value try 1.1v...

    Ok, you need to manually set SOC Value try 1.1v to 1.15v


    How to set SOC Voltage.

    Enter BIOS, Advanced mode.

    Navigate to
    Extreme Tweaker (maybe AI Tweaker) -> CPU SOC Voltage set to manual...
  6. From the CPU, have you put the RAM in slots 2 & 4...

    From the CPU, have you put the RAM in slots 2 & 4 (A2 & B2) ?
  7. hmm if it's a mixed kit, try SOC of 1.1v to 1.15v...

    hmm if it's a mixed kit, try SOC of 1.1v to 1.15v and see how it goes....
  8. If the memory is new, you should RMA it. ...

    If the memory is new, you should RMA it.

    DDR4@3600 CL16 is ideal.
  9. There are three lists for RAM QVL, if you're on...

    There are three lists for RAM QVL, if you're on one that's good enough. 2 out 3 isn't bad. All three, you're golden.

    (1) Asus - Motherboard manufacturer.
    (2) AMD...
  10. DDR4@3600 is an overclock of types. No harm...

    DDR4@3600 is an overclock of types. No harm having both hooked up, try it, then leave it that way.

    Your choice does not appear like can be overtightened to the motherboard, still sometimes random...
  11. Do you have both E-ATX connectors connected (top...

    Do you have both E-ATX connectors connected (top left of motherboard, above cpu) ?
    What are you using to cool the CPU ?
  12. Try the drivers here...

    Try the drivers here
    https://rog.asus.com/forum/showthread.php?124328-DRIVERS-MediaTek-WiFi-Bluetooth&highlight=MediaTek+WiFi%2FBluetooth

    or could just replace the NIC with Intel AX210 (which is...
  13. Western Digital will release a firmware update...

    Western Digital will release a firmware update that eliminates a restriction in our product for this setting of MPS, expected to be available by July 12, 2021.

    For optimum SSD performance, Western...
  14. I think, WD SN850 might have some issues....

    I think, WD SN850 might have some issues.
    https://www.tomshardware.com/news/wd-black-sn850-performance-issues-chipset-m-2
    ...
  15. DDR@3600 would be best assuming your keeping a...

    DDR@3600 would be best assuming your keeping a 1:1 IF
    89963
  16. Replies
    4
    Views
    123

    Can you take a photo of the system, with the AIO...

    Can you take a photo of the system, with the AIO radiator and pump clearly visible.
    Also maybe record the noise / upload it.
  17. Turn on G-sync set 240Hz 2560x1440p Use V-sync...

    Turn on G-sync set 240Hz 2560x1440p
    Use V-sync in any game that you can turn it on and follow generally what GeForce Experience recommends for settings.
    Enjoy!
  18. Have you tried selecting DOCP like this and...

    Have you tried selecting DOCP like this and seeing if it will boot.
    https://www.legitreviews.com/wp-content/uploads/2018/05/asus-x470-board-645x484.jpg
  19. You are not using DOCP for your memory, set at...

    You are not using DOCP for your memory, set at 3200 not 3600. adjust this and retest.
  20. OP, can you run Userbench and then provide link...

    OP, can you run Userbench and then provide link your end results, I'll take a look.
    https://www.userbenchmark.com/

    something is not right.
  21. Replies
    4
    Views
    117

    From the CPU, check you have the ram in slots 2 &...

    From the CPU, check you have the ram in slots 2 & 4 (A2 & B2).

    Select DOCP like this
    https://www.legitreviews.com/wp-content/uploads/2018/05/asus-x470-board-645x484.jpg
  22. I mainly use AI tweaker. I'm old school, don't...

    I mainly use AI tweaker. I'm old school, don't use Ryzen Master or anything from OS to overclock.

    AMD CBS, rarely need to use. (turn on virtualisation, think it was here)
    AMD overclocking, very...
  23. ok fly boy, In Aida64 without even shutting down...

    ok fly boy, In Aida64 without even shutting down other memory loadings or trying to beat your score, I can get 57K Read 56K Write and 55K Copy @ 3800 with a 62ns Latency with 3900x (I can easily get...
  24. Are you using from the CPU slots 2 & 4 (A2 & B2)

    Are you using from the CPU slots 2 & 4 (A2 & B2)
  25. Well smart people know about Infinity Fabric and...

    Well smart people know about Infinity Fabric and how it works. Clearly bar bar you don't. Let me know when it blows up, should be good for something. Thinking BBQ lamb.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4