Search:

Type: Posts; User: Youngevans

Search: Search took 0.00 seconds.

  1. Great!

    Great!
  2. Great! Thank you very much, you've been of great...

    Great! Thank you very much, you've been of great help. if you were me, would you choose the VA 32" panel since I like bigger screens over the 27" IPS panel? I am asking this because I read that 1440p...
  3. Great! Thank you very much, you've been of great...

    Great! Thank you very much, you've been of great help
  4. Unfortunately it is not available where I am...

    Unfortunately it is not available where I am currently, so I am ordering it. This means there's no shop around here that sells gaming monitors. So I can't go check them. Is your 32" also a VA panel,...
  5. 2k on a 27" IPS monitor OR 2k on a 32" VA monitor? Please help

    I am changing my samsumg U28E590D 4K 60hz monitor 28 inches (TN) to a 2k (1440p) 165hz and here is why;
    1. 4K is stupidly demanding and expensive to run, most games runs poorly at 4k resolutions. I...
  6. Replies
    17
    Views
    22,155

    Sometimes, resetting / clearing cmos can resolve...

    Sometimes, resetting / clearing cmos can resolve this issue. Install one stick of ram at a time to after clearing. Then keep adding up.
  7. Thanks buddy

    Thanks buddy
  8. How to run an m.2 ssd drive in pci-e mode on my Maximus viii formula ?

    Hello everyone

    How do I run an m.2 ssd drive (SanDisk X300s M.2 2280 256GB) in PCIe mode on my Maximus viii formula ? I am pretty much sure its running in sata mode because it dissabled a sata...
  9. Thank you Nate, Ill give you the results

    Thank you Nate, Ill give you the results
  10. That may be a mistake, I use 8Gb x 4 corsair...

    That may be a mistake, I use 8Gb x 4 corsair vengeance lpx ddr4 3000mhz. And after playing around for sometime Ive realised enabling xmp causes my system to fail in a short time when i stress test....
  11. Overclocking fails stress test when all memory banks are populated

    Hello everyone, My cpu overclock fails withing 1 - 2 mins when stress testing irregardless of the clock speed and voltage, I have tried 4.7, 4.6, and 4.5 ghz so far. I use an i7 6700k on maximus viii...
  12. In regards to the above post, fisrt of all sorry...

    In regards to the above post, fisrt of all sorry for not updating the mobo's bios as instructed by Nate, it was due to some circumstances however, I cleared the bios as required by ondersma80 but it...
  13. Replies
    6
    Views
    26,562

    Sticky: Thanks mate, noted

    Thanks mate, noted
  14. Replies
    6
    Views
    26,562

    Sticky: Lol...i guess u gotta go back and finish reading,...

    Lol...i guess u gotta go back and finish reading, the new version he posted fixes the problem. Link was posted below for downloading. Good luck ;)
  15. Thanks Nate, ill update you soon after.

    Thanks Nate, ill update you soon after.
  16. Well noted, but i dont think 1.42 *at a stock...

    Well noted, but i dont think 1.42 *at a stock speed of 4.2ghz is safe at all nor good when most are getting 1.2... on stock speeds. If you take a look at my rig, you'll not need to be told what i use...
  17. Hi fella, this is a common however big problem...

    Hi fella, this is a common however big problem with asus z170 boards, i am facing the exact problem and with me setting voltages manually doest not work i mean motherboard does not pick the voltages...
  18. Rog maximus viii formula setting too high voltages and ignoring manual voltage

    I purchased a rog maximus viii formula motherboard from Amazon with 1701 x64 bios version and i hv installed an i7 6700k cpu and installed win 10 x64 in uefi mode on pny ssd 240gb. my problem is with...
Results 1 to 18 of 18