Search:

Type: Posts; User: cniedzi

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Silent Scone@ASUS could you write what exactly...

    Silent Scone@ASUS could you write what exactly MemOK! switch do? Does it disable memory stress test during POST and disable Memory Training, or disable both? Or.. maybe memory stress test is the same...
  2. When it comes with specification the primary...

    When it comes with specification the primary timings tCL-tRCD-tRP-tRAS -CR are given usually on product listing, box or manufacturer site. Secondary and teriary timings are set by memory training...
  3. It doesn't work for me :(

    It doesn't work for me :(
  4. MemOK! means memory training process failed...

    MemOK! means memory training process failed during post. If you set XMP, BIOS sets these voltages automatically, usually too high. Try to manually tune VCCSA and VCCIO.

    In my case I also had...
  5. This is safe but very expensive approach :) 3200...

    This is safe but very expensive approach :) 3200 can be half priced than 3600... If i can advise you, look into QVL for your MB and get RAM with speed you want and tightest timmings you can afford...
  6. That's true :) :) :)

    That's true :) :) :)
  7. I've answered your question: And this is an...

    I've answered your question:

    And this is an answer to your 1st question: in theory T topology makes it is easier to obtain tighter timmings & higher speed with 4 sticks kit.
  8. I would even say in real life the difference...

    I would even say in real life the difference between 3200 and 4000 is practically unnoticeable :)
  9. I had the same write bandwith issue with MXIH and...

    I had the same write bandwith issue with MXIH and my RAM overclocked over 4000 MHz. In Mode 2 memory training sets incorrect tWRWR_dg value (even in XMP I). In Mode 1 it is set ok, but in Mode 1 I...
  10. Replies
    6
    Views
    124

    spec?

    spec?
  11. Replies
    4
    Views
    412

    Thx for info

    Thx for info
  12. Put USB and enter BIOS, Tools->Asus User...

    Put USB and enter BIOS,
    Tools->Asus User Profile->Load/Save profile and hit Ctrl+F2
  13. Replies
    4
    Views
    412

    CPU Cache ratio impact on RAM stability

    Hi,

    Does CPU Cache ratio have impact on RAM OC stability or VCCSA on Z390 MB?
  14. The only way to find out who's wrong is to put...

    The only way to find out who's wrong is to put your CPU onto another motherboard, i think....
  15. VCCSA is System Agent Voltage, helps overclock...

    VCCSA is System Agent Voltage, helps overclock BLCK, while VCCIO is IMC Voltage and helps stabilize when overclocking RAM. In practice both help overclock RAM.

    BIOS 0602 is the most stable UEFI...
  16. Target for 3600MHz should be 1.35V...

    Target for 3600MHz should be 1.35V...
  17. Replies
    351
    Views
    71,451

    No need to rename the file extention. Must be...

    No need to rename the file extention. Must be CMO.*

    Btw. As far as I remember F2 saves txt file while CTRL (or SHIFT)+F2 saves CMO bin file.
  18. Hi, where did you get these settings from? ...

    Hi,

    where did you get these settings from?

    PS. I think 1.45V is far too much for 3600MHz...
  19. BIOS main page DRAM Voltage = POST/memory...

    BIOS main page DRAM Voltage = POST/memory training DRAM Voltage
    Extreme Tweaker -> Eventual DRAM Voltage = DRAM post POST (ie. Windows) voltage
  20. Mode 2. Command rate is set to Auto. I wil try...

    Mode 2.

    Command rate is set to Auto. I wil try to fix it to 2N.
  21. It seems my MemOK! issues raise randomly. For...

    It seems my MemOK! issues raise randomly. For example today I'm able to successfully post @3866MHz 1.35V VCCIO 1.1V VCCSA 1.1V ...
    I've considered turning MemOK! button off, but it may result in...
  22. 1302 has worked stable for me for few days and...

    1302 has worked stable for me for few days and started to have MemOK! issues again... Now I've had to increase VRAM to 1.38V to post without MemOK!, let's see...

    PS. I'm starting to consider MB...
  23. Replies
    351
    Views
    71,451

    My rig (Maximus XI Hero @1302) has worked...

    My rig (Maximus XI Hero @1302) has worked stablefor few deys and started to have MemOK! issues again... Now I've had to increase VRAM to 1.38V to post without MemOK!, let's see...

    Any...
  24. My results 81984 PS. I'm very interested if...

    My results
    81984

    PS. I'm very interested if you have CRC errors with M XI Extreme...
  25. Nice. Mine are similar for 3866 17-17-17-36-350...

    Nice. Mine are similar for 3866 17-17-17-36-350 :)

    Have CRC errors gone? What memory Mode do you use now?
Results 1 to 25 of 107
Page 1 of 5 1 2 3 4