Search:

Type: Posts; User: Deepcuts

Page 5 of 10 FirstFirst 2 3 4 5 6 7 8

Search: Search took 0.01 seconds; generated 88569 minute(s) ago.

  1. Replies
    3
    Views
    2,108

    Long time user of big bad air coolers like Noctua...

    Long time user of big bad air coolers like Noctua NH-D14 and D15.
    Those are a pain to work with if you plan on working inside your case, take out RAM sticks, replace thermal paste,...
  2. Replies
    22
    Views
    6,710

    Don't forget to run MemTest86 at stock settings....

    Don't forget to run MemTest86 at stock settings. No OC on CPU. Disable Asus Multicore Enhancement.
    If Memtest86 reports any errors, try disabling XMP and running the memory at 2133 Mhz (No...
  3. Replies
    22
    Views
    6,710

    70 Celsius delided or stock paste? If anything,...

    70 Celsius delided or stock paste?
    If anything, I hope 70 on cores not CPU MB sensor.

    I would test with Memtest86 (not +) and let it run all tests. You might have some memory instability.
  4. Replies
    8
    Views
    1,996

    HERO as 2nd choice! Blasphemy! It is karma.

    HERO as 2nd choice! Blasphemy!
    It is karma.
  5. Replies
    40
    Views
    7,010

    There is something really fishy with this combo....

    There is something really fishy with this combo.
    Today I got nothing better to do and loaded XMP again.
    It booted just fine, ran all the benchmarks in the world for 2 hours and on top of that, for...
  6. If at 3000Mhz you get the same problem, you might...

    If at 3000Mhz you get the same problem, you might have one ore more faulty sticks.
    Test all RAM sticks with MemTest86. Let it finish. Will take several hours.
    As soon as you see any errors, start...
  7. I would say the sensors on the motherboard in...

    I would say the sensors on the motherboard in toast.
    If this is a new motherboard, RMA.
    Not that you should monitor your CPU temperature anyways (reported by your MB). Always check your cores temps...
  8. Replies
    23
    Views
    25,663

    If M.2_2 is set at x4, SATA 5 & 6 are disabled....

    If M.2_2 is set at x4, SATA 5 & 6 are disabled.
    This is my setup also.
    If M.2_2 is set at x2, SATA 5 & 6 are NOT disabled, but the nvme SSD has half the required bandwidth, thus lower speeds.
  9. Replies
    297
    Views
    84,481

    If you think MSI is trouble free, you are wrong...

    If you think MSI is trouble free, you are wrong buddy . Hey it rhymes!
    Every electronics manufacturer/designer has it's share of problems.
    I have yet to meet one that fixes stuff promptly. They...
  10. Replies
    11
    Views
    1,948

    "RGB won't light up" or "defunct board"?

    "RGB won't light up" or "defunct board"?
  11. Replies
    6
    Views
    3,937

    Have the same components and did not see this...

    Have the same components and did not see this behavior.
    In Advanced\Onboard Devices Configuration have you setup M.2_1 Configuration to PCIE mode?
    Or M.2_1 at X4 bandwidth if you have your SSD in...
  12. Replies
    40
    Views
    7,010

    Replaced the KIT with an identical one. Same...

    Replaced the KIT with an identical one. Same story.
    So, more testing with interesting results.

    Tested each stick of RAM, one at a time in A1.
    Loaded XMP at 3.466Mhz with 1.350V DDR voltage. Rest...
  13. Replies
    7
    Views
    1,727

    If you already updated BIOS, the reset was done....

    If you already updated BIOS, the reset was done. So no luck there I guess.
    Are your DP/HDMI cables very long by any chance? Can you test with a shorter/different cable?
  14. Replies
    23
    Views
    25,663

    M2_1 can be setup as SATA or PCIex. You have a...

    M2_1 can be setup as SATA or PCIex.
    You have a nvme SSD so you will set it up as PCIex for maximum speed, thus SATA 1 will not be shared or disabled with the M.2 port.
    Only if M2_1 is setup as SATA...
  15. Replies
    7
    Views
    1,727

    If it is happening with DP and HDMI, it is indeed...

    If it is happening with DP and HDMI, it is indeed very strange. Except the situation I described, i never met another case.
    I would try resetting BIOS to defaults. Fixed some strange problems for me...
  16. Replies
    7
    Views
    1,727

    I saw the same behavior with an older monitor...

    I saw the same behavior with an older monitor that had only VGA input and the user had to use a HDMI to VGA converter.
    Display turned on very slowly. Sometimes even one minute.
  17. Replies
    23
    Views
    25,663

    If you setup M2_1 as PCIEX with a nvme SSD, you...

    If you setup M2_1 as PCIEX with a nvme SSD, you will not lose SATA 1.
  18. No problems with the actual screws here, but one...

    No problems with the actual screws here, but one of the M.2 nuts just popped out of the motherboard on my Maximus X HERO.
    So users of Zenith might have the same poor nut soldering on their boards....
  19. Replies
    60
    Views
    19,306

    For 5.1 sound you need 5.1 tracks/source....

    For 5.1 sound you need 5.1 tracks/source.
    Youtube via browser and most music formats are 2.0 sources. Thus, not all speakers will produce sound.
    There are tricks to make some of 2.0 sources play...
  20. Replies
    40
    Views
    7,010

    "Tried increasing SA and IO in 0.10 steps up to...

    "Tried increasing SA and IO in 0.10 steps up to 1.360V each" is missing a 0.
    I tried upping the voltage in 0.010 steps up to 1.360V, from 1.000V for both SA and IO, just like you said.
    Every time...
  21. Replies
    40
    Views
    7,010

    Tried increasing SA and IO in 0.10 steps up to...

    Tried increasing SA and IO in 0.10 steps up to 1.360V each and DDR Voltage at 1.450V. No luck with XMP or manual 3466Mhz.
    So I decided to leave the speed at 3200Mhz and lower the timings.
    So far,...
  22. Replies
    40
    Views
    7,010

    Thank you Raja. Will try tuning SA and IO some...

    Thank you Raja.
    Will try tuning SA and IO some more.
  23. I am just trying to run my KIT at XMP spec. while...

    I am just trying to run my KIT at XMP spec. while others can successfully overclock their RAM so much more than spec. Nice memory you got there!
    Just a hint Wolfdale: try testing with MemTest86 and...
  24. Replies
    40
    Views
    7,010

    Just a quick follow up. I have opened a ticket...

    Just a quick follow up.
    I have opened a ticket with Corsair and I was advised to increase DRAM Voltage up to a max of 1.480V.
    Corsair rep said: "Intel recommends up to 5% from stock, which would be...
  25. Replies
    40
    Views
    7,010

    3466Mhz With Manual timings 16-18-18-36 and...

    3466Mhz With Manual timings 16-18-18-36 and manual DRAM Voltage 1.360. rest left Auto. XMP disabled.
    70680

    This setup will randomly freeze and reset without BSOD.

    Auto settings for VCCIO and...
Results 101 to 125 of 244
Page 5 of 10 FirstFirst 2 3 4 5 6 7 8