Search:

Hello,


Having replaced the board already the most likely culprit will be the CPU. Save potentially damaging another board, if possible I would take it to a system integrator and get them to...

Hello,

Non-K CPUs don't require an additional AVX offset as they're not able to operate above the maximum turbo frequency.

Hello,

Cross-platform installations aren't foolproof or even advisable. Where possible one should always perform a format reinstall if installing a new motherboard as a matter of due course.
...

Hello,

Please specify what kit.

Hello,

Remove the CPU cooler and CPU whilst checking for any damaged pins.

Reseat the CPU cooler whilst checking for even mounting pressure.

Clear the UEFI and leave at complete system...

Hello,

Whilst some may not experience issues, others might. Memory overclocking is fraught with conditional elements at an electrical level that need to be taken into consideration.. From a...

Hello,

Top of the line has different connotations depending on what you are looking to do.

For instance, what will the system be used for? Whilst 256GB of RAM sounds amazing, if this density...

Hello,

On the HERO it is possible to control the RGB lighting effects via Armoury Crate. However, there are three pattern states which are ROG, HERO and off.

Hello,

Have you the enclosed rubber pads that ship with the motherboard meant for single sided M.2 devices?

Checked my PM but can't seem to find anything from you. I'll contact you this morning.

Hello,

8 years is definitely a large upgrade gap :D

What is it exactly you're looking to do? Most of the default petametres won't ever need changing.

If it's overclocking, I'd recommend...

Hello,

You can use CPU_FAN header how you like, however CPU_OPT is slaved to it meaning it cannot be controlled independently from CPU_FAN.

Hello,

No official information is available yet, will have to stick to the media outlets for the time being.

Hello,

Per core OC is the way to go on 12th gen. You can check out the predictions in the AI Tweaker menu.

Hello,


Remove all overclocking including XMP and PBO and retest.

Remove the CPU, reseat and check for even mounting pressure.

Hello,

The white pixelated lines and screen artefacts point towards a GPU issue.

First and foremost you need to make sure there is no overclock whatsoever.

This means Optimised Defaults. No...

Most difficulty this generation comes from users mixing/combining memory kits. 5600CL36 2x16 should be fine. You can post back if you're experiencing trouble stabilising the overclock.

It's a case of different applications fighting for control. Might be worth checking in with Corsair.

...

Hello, the 8-pin ESP is required in order to use the motherboard.

For your CPU you will not need the additional 4-pin ESP connector as the CPU is not capable of drawing enough current.

ROG Strix LC RTX 3090Ti OC Edition Overclocking Overview

To say NVIDIA's Ampere was born amid strange times is an understatement. With a global pandemic, various component shortages amongst huge...

Use the Chassis fan headers. You can then use QFAN from within the UEFI to control the temp source and fan curve.

Hello,

I use HWInfo stats panel and GPUTweak3, personally.

You might want to check out the overview video on AI Overclocking.


https://www.youtube.com/watch?v=YI5yoK1hgQ4

More isn't always better so be sure to test methodically, that's where some people tend to trip up.


Try both Tweak Mode 1 and 2 with the following and select 2T.

These are the more...

Hello,


Got Extreme Tweaker > CPU System Agent Voltage

Test between 1.05v - 1.25v

Go to Extreme Tweaker > Advanced memory settings

Test Memory Controller Voltage to between 1.25 -...

Being a KF makes troubleshooting a little more difficult. I’d be inclined to try an alternative GPU. Might be best to let a system integrator take a look for you if you’ve exhausted everything.