Search:

Type: Posts; User: bhavvv

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Asus support not responding to my email, retailer claiming user error

    This is regarding an ongoing issue with the screws on my M.2 heatsink having been far too tight to remove and simply needing a replacement heatsink with actual removable screws.

    The retailer...
  2. Replies
    7
    Views
    245

    Ofc, reduced to 1.225v each. 1.2v isn't enough...

    Ofc, reduced to 1.225v each. 1.2v isn't enough for my high memory OC. On auto they go over 1.4v, something that is waaay too high with auto volts.
  3. Replies
    7
    Views
    245

    Ofc, reduced to 1.225v each. 1.2v isn't enough...

    Ofc, reduced to 1.225v each. 1.2v isn't enough for my high memory OC. On auto they go over 1.4v, something that is waaah off with auto volts.
  4. Replies
    7
    Views
    245

    I could try it just to see but I don't think I...

    I could try it just to see but I don't think I should go any higher on a 140mm AIO than 1.3v for daily use.
  5. Replies
    0
    Views
    79

    Z390i and two PCI-E NVMEs setup queries

    I have a Rog strix Z390i and also just got 2x2 tb adata NVME drives rated for 3500 read and 3200 write.

    But in raid 0 I only get around 3000mb read speed still, is there something I need to do to...
  6. Replies
    7
    Views
    245

    I needed around 1.37v for 4.9 on my 8700K and it...

    I needed around 1.37v for 4.9 on my 8700K and it was too much for mini itx 140mm cooler.

    I was about to delid it but tried contacting Intel about the stock temperatures and IBT instability, ran a...
  7. Replies
    62
    Views
    19,702

    Google Micron E Die and look it up. And yea,...

    Google Micron E Die and look it up. And yea, thats what Ballistix 3200 CL16 does. They dont bin it any higher so it can be luck of the draw for anything more than 3600 CL14. Depending on where you...
  8. I still think that this is something that needs...

    I still think that this is something that needs posting about so more people and possibly asus themselves become more aware, here is a picture of my now battered and beaten heatsink and I will detail...
  9. Replies
    62
    Views
    19,702

    Look for Crucial Ballistix 3200 CL16. Its cheap...

    Look for Crucial Ballistix 3200 CL16. Its cheap and Micron E die, and you can check that with taiphoon burner (spelling might be different). I was also told that the 3000 Mhz CL15 should also be the...
  10. Replies
    7
    Views
    245

    5.1 Ghz 9700K, 1.3v

    https://imgur.com/a/V8r19eE

    I just got my new 9700K and Z390i motherboard working, and the CPU is currently fully stable under gaming all day and Intel extreme tuning utility at 5.1 Ghz, 1.3v, LLC...
  11. Replies
    62
    Views
    19,702

    Just thought I'd share some interesting results...

    Just thought I'd share some interesting results regarding my memory overclocking between a Z370i and 8700k, and Z390i and 9700K (CPU RMA and I accidentally damaged the pins on the Z370).

    Out of...
  12. Because when I googles about it loads of threads...

    Because when I googles about it loads of threads came up about it here. And it takes a bit more effort to register the board and contact Asus support.

    I'm already in contact with the retailer but...
  13. I managed to ghetto fix it by putting on the...

    I managed to ghetto fix it by putting on the heatisink from my broken Z370i:

    https://imgur.com/a/5VeCZAn

    So based on reading around on the internet, I tried to put a rubber band under the...
  14. Here are pictures: http://imgur.com/a/Nrz0udM...

    Here are pictures:

    http://imgur.com/a/Nrz0udM

    1) New board, top screw stripped, bottom still won't come off no matter what (screwing anti clockwise).

    2) Old board, screws come off and go...
  15. Please can anyone help me? I'm having this same...

    Please can anyone help me? I'm having this same problem with a new Z390-i board I just got:
    ...
  16. New Z390-i Rog Strix, M.2 heatsink screws will not come off!

    I'm using the same screwdriver that worked for the same screws on my broken Z370-i, and that also worked to install an SSD on the back, but the ones on the front M.2 heatsink are literally sealed /...
  17. Replies
    0
    Views
    202

    4133 Cas 16 on a 2x16 Gb kit

    Micron E Die ram on my Asus Rog Strix Z370-I motherboard with 1.485v Dram voltage:

    81792

    When I bought the ram I could only get it up to 4000 Mhz, but after installing the latest bios I managed...
  18. Replies
    0
    Views
    4,774

    No download for clone drive?

    I have my new Rog Strix Z370-i installed, but dont have an external disk drive for my itx case yet. This software is advertised for this board too, but its not available for download on the product...
  19. Replies
    0
    Views
    769

    Advice needed for ROG STRIX Z370-I GAMING

    https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-I-GAMING/

    I've already read everything on the product page, and downloaded and read the manual.

    Before I place my order for this mobo and an...
  20. I found a better solution - I ordered a...

    I found a better solution - I ordered a soundblaster Z.
  21. Never mind, I've given up with trying to get the...

    Never mind, I've given up with trying to get the audio sorted on this board and ordered a Creative Soundblaster Z. I made a mistake when I sold my previous X Fi Titanium HD when upgrading to X99.
  22. Does the rear line in on RVE10 support ASIO?

    Im trying to enable Asio on my line in for recording purposes, but dont even know if it is supported.

    Could anyone let me know if the line in on this board supports Asio?

    Also am I supposed to...
  23. I'll try that. I'm downloading the realtek...

    I'll try that. I'm downloading the realtek drivers too to use instead if I cant get the front panel working.

    Well that didnt work, so Im just using the back panel and realtek drivers instead.
  24. Supreme FX Hi Fi (on RVE10) only working in mono

    I've installed the latest drivers + control panel form the motherboards website (v1911421) and tried with 3 different headphones, but only the left channel works, I get no audio output on the right...
  25. Replies
    7
    Views
    2,516

    Well I couldnt get any higher clocks stable at...

    Well I couldnt get any higher clocks stable at 13-13-13 timings, even 3250 eventually began throwing up errors in Memtest.

    However 14-14-14-1T 3333 Mhz is stable, and at much lower voltage (1.4v)...
Results 1 to 25 of 44
Page 1 of 2 1 2